AUTOTERM Comfort Control PU-CC User manual

Autoterm Comfort Control
Quick Set and Operating
Normal Blank Screen
1) Turn Main Knob to bring screen
to life
2) Press Knob TWICE
This brings up the Temperature
setting screen
3) Turn Knob to the desired Room
Temperature
4) Press Main Knob to bring up
the RUN Time

5) Turn Knob set the desired
Runtime. The infinity symbol will
allow the heater to run until you
turn the heater off
6) Press knob again and heater
will run -running mode shows
with the Red Lights glowing
To Turn Off the Heater Press the
Button in the lower RH corner
Green Lights show the heater has
gone into shutdown mode
Super Quick Instructions
Press/Turn knob to bring screen
to life
Press Corner Button to Start
Heater
Red Lights show Heater in
Heating Mode
Press Corner Button to Stop
Heater
Comfort Control PU-CC