Auxiescope OPX-1600 User manual

User's Guide
Auxiescope
OPX-1600

●Number of channels: 2
●Analog bandwidth: 12 MHz
●AD Resolution: 8 bit
●Sample rate: 50 MS/s (each channel)
●Buffer length: 2000 points
●D accuracy: +/- 5%
●Input impedance: 1 MΩ, in parallel with 20 pF
●Input coupling: A /D
●Time base range: 500 ns/div – 10 s/div
●Vertical sensitivity: 10 mV/div – 1 V/div (1x)
●Max input voltage: 8 Vpp (1x), 80 Vpp(10x)
Specifications
●Auto measure: Vmax, Vmin, Vamp, Freq, Period
●ursors: Period, Voltage
●Trigger modes: Normal, Auto, Single, Scan
●Trigger slope: Raising, Falling
●Trigger source: H1, H2
●ommunication: Bluetooth lassic, SPP profile
●Battery life: 5 hours
●harging time: 3 hours
●Dimensions: 147 x 89 x 25 mm
●Weight: 130 g
●Supported OS: Android, Windows, Linux, OS X

Quick Reference
Channel 1
Channel 2 Micro USB charger port – connect to
USB port or wall adapter 0.5A 5V
Power button – pre and hold 2 econd
Statu LED
Communication Mode :
Bluetooth connection wait
Fla he once per econd
Bluetooth connection active
Fla he every 300 m
Charger Mode (power off)
Charging
Fla he once per 3 econd
Charging completed
Stay Solid

Quick start
Note: Before the first use make sure that battery is fully charged (status LED stays solid when
battery is fully charged .
Tip: Oscilloscope will charge faster when it is powered off.
●Connect micro USB cable to PC or USB wall adapter and charge the battery.
●Pre and hold power button for about 2 econd to turn the o cillo cope on.
●On Android device go to Sy tem etting ->Bluetooth. Enable bluetooth and activate device earch
●OPX-1600 o cillo cope how up a BTSCOPE SNXXXXX. Pair with it u ing pin 1234.
●Download and in tall AR O cillo cope app from Play Store. Open it.
●Goto Setting menu->Connect to device. Select paired device from di played li t and connect to it
●At thi point the o cillo cope i ready for u e.
Note: Oscilloscope is equiped with auto shut off function to save power. If Bluetooth
connection is not active for about 6 minutes, the device will automatically shut off.

Android app basic controls
Trigger level
Vertical scale –
u e multitouch in
vertical direction to
change currently
active channel
Horizontal scale – u e
multitouch in horizontal
direction anywhere on the
creen to change
Horizontal
trigger Vertical
position control
– drag to move
channel up/down.
Tap to toggle ignal
On/Off
Trigger mode – tap to
open trigger etting menu
Automatic
measurements
– hown for
currently active
channel (highlighted
in bold) Tap on
ignal CH1 or CH2
to make it active
H1 – tap on it to
make it active for
automatic
mea urement
(channel will
become bold)
H2 – tap on it to
make it active for
automatic
mea urement
(channel will
become bold)
Run/Stop Settings
menu
Signal
menu

Android app advanced controls
Zoom tool – u e
multitouch to zoom
in/out
ursors
tool
Voltage
ursor 1
Voltage
ursor 2
Time
ursor 1
Time
ursor 2
ursor
measurements