Avalue Technology ERS-CDVE User manual

Part No. E2017ERSEA1R
ERS-CDVE
Fanless Intel® Atom™ D2550 Rugged Embedded
System with Intel® NM10 Express Chipset
Quick Reference Guide
2nd Ed –25 July 2013
Copyright Notice
Copyright 2013 Avalue Technology Inc., ALL RIGHTS RESERVED.

ERS-CDVE
2 ERS-CDVE Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Copyright Notice
Copyright 2013 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.

Quick Reference Guide
ERS-CDVE Quick Reference Guide
3
CONTENT
1. Getting Started............................................................................................................5
1.1 Safety Precautions ................................................................................................5
1.2 Packing List...........................................................................................................5
1.3 System Specifications ...........................................................................................6
1.4 System Overview...................................................................................................8
1.4.1 Front & Top View ......................................................................................................................... 8
1.4.2 Front View.................................................................................................................................... 9
1.4.3 Rear View..................................................................................................................................... 9
2. Hardware Configuration...........................................................................................11
2.1 ERS-CDVE connector mapping...........................................................................12
2.1.1 External Serial Port 1/3/4/5/6/7/8/9/10 connector (COM1/3/4/5/6/7/8/9/10).............................. 12
2.1.2 VGA connector (VGA)................................................................................................................ 12
2.1.3 LPT connector (LPT Port).......................................................................................................... 13
2.1.4 LVDS connector (LVDS Port) .................................................................................................... 13
2.1.4 Multi-Function Port combined COM2, 2 PS/2, Audio, GPIO and SMBus (Multi-function port) . 14
2.1.4.1 GPIO+SMBUS....................................................................................................................... 15
2.1.4.2 COM2 .................................................................................................................................... 15
2.2 EBM-CDVS and AUX-M03 Overviews ................................................................16
2.2.1 EBM-CDVS................................................................................................................................ 16
2.2.2 AUX-M03.................................................................................................................................... 18
2.3 EBM-CDVS Jumper & Connector list ..................................................................18
2.4 AUX-M03 Connector list......................................................................................19
2.5 EBM-CDVS Jumpers & Connectors settings.......................................................20
2.5.1 Clear CMOS (CMOS1) .............................................................................................................. 20
2.5.2 COM 1/2 pin 9 signal select (JRI1/2)......................................................................................... 20
2.5.3 LPC port connector (LPC1)........................................................................................................ 21
2.5.4 Power connector (PWR1).......................................................................................................... 21
2.5.5 LCD inverter connector (BKL1).................................................................................................. 22
2.5.6 LCD backlight brightness adjustment (JVR).............................................................................. 22
2.5.7 SPI connector (SPI1) ................................................................................................................. 23
2.5.8 Front Panel Connector 1 (CN1)................................................................................................. 23
2.5.9 Front Panel Connector 2 (CN2)................................................................................................. 24
2.5.10 DC Output connector (DCOUT_S)........................................................................................ 24
2.5.11 AT/ATX mode selector (SW1) ............................................................................................... 25
2.5.11.1 Signal Description –AT/ATX mode selection ...................................................................................25
2.6 AUX-M03 Connectors settings ............................................................................26

ERS-CDVE
4 ERS-CDVE Quick Reference Guide
2.6.1 System reset (WCN1)................................................................................................................ 26
2.6.2 LPT Port (WJPRT1)................................................................................................................... 26
2.7 Installing Mounting Brackets (ERS-CDVE)..........................................................27
2.8 Installing Hard Disk & Memory, PCI devices (ERS-CDVE) .................................28

Quick Reference Guide
ERS-CDVE Quick Reference Guide
5
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x ERS-CDVE Fanless Intel® Atom™ D2550 Rugged Embedded
System with Intel® NM10 Express Chipset
1 x Quick Reference Guide
1 x DVD-ROM contains the followings:
—User’s Manual (this manual in PDF file)
—Ethernet driver and utilities
—VGA drivers and utilities
—Audio drivers and utilities
Other major components include the followings:
—44-Pin Multiple Function Cable
—Wall Mount Bracket
—Adapter
—Power Cord
—Screw kit for Wall Mount/Mini Card/2.5” Drive Bay

ERS-CDVE
6 ERS-CDVE Quick Reference Guide
1.3 System Specifications
System
Board
EBM-CDVS + AUX-M03
CPU
Onboard Intel® Atom™ D2550 1.86GHz CPU
BIOS
AMI 16Mbit SPI BIOS
System Chipset
Intel® NM10 Express Chipset
I/O Chip
Nuvoton W83627DHG-P
System Memory
One 204-pin DDR3 SODIMM Socket Up to 4GB DDR3
800/ 1066 SDRAM
Storage
1 x 2.5” Drive Bay, 1 x mSATA
Watchdog Timer
Reset: 1sec. ~ 65535sec./min. and 1sec. or 1min./step
H/W Status Monitor
Monitoring System Temperature and Voltage with
Auto Throttling Control
Expansion Interface
2 x Mini PCIe Socket
(mSATA on 1st, SIM Card Slot on 2nd)
External I/O
COM
10 x RS-232 (COM1 ~ COM4 Can be Set as 422/485 by BIOS);
COM3 ~ COM10 Supports Isolation Protection
LAN
1 x RJ-45
Antenna
2 Knockouts for Antenna Mounting
(Options to Add WiFi & 3G)
VGA
1 x VGA
Audio Port
Mic-in, Line-in, Line-out
GPIO
6-bit GPI and 6-bit GPO
USB Port
5 x USB 2.0 (Front 1; Rear 4)
PS/2
2 x PS/2 for KB & MS
SIM
1 x SIM Card Slot
SMBUS
1 x SMBUS
DC Output
2-Pin Phoenix (Voltage is Identical with DC-Input)
LPT
1 x DB-25
LVDS
1 x Dual-channel 18/ 24-bit LVDS
Display
Chipset
Intel® Cedarview Integrated Graphics
Resolution
CRT Mode: 1920 x 1200 @ 60Hz
Audio
Audio Chipset
Realtek ALC892 Supports 5.1-CH Audio
Audio Interface
Line-in, Line-out and Mic-in

Quick Reference Guide
ERS-CDVE Quick Reference Guide
7
Ethernet
LAN Chip
1 x Intel® 82574L Gigabit Ethernet
Ethernet Interface
10/ 100/ 1000 Base-Tx Gigabit Ethernet Compatible
Environment & Mechanical
Power Requirement
+12 ~ +26Vdc (Lockable DC Jack)
ACPI
Single Power ATX Support S0, S3, S4, S5
ACPI 3.0 Compliant
Power Mode
AT/ ATX (ATX is The Default Setting)
Operating Temperature
-10 ~ 60°C (w/ mSATA and 2.5” SSD), Ambient w/Air Flow
Storage Temperature
-40 ~ 75°C (-40 ~ 167°F)
Relative Humidity
0% ~ 90% Relative Humidity, Non-condensing
Vibration Protection
With mSATA/ SSD: 5Grms, IEC 60068-2-64, Random,
10 ~ 500Hz, 1hr/axis
Shock Protection
With mSATA/ SSD: 50G, IEC 60068-2-27, Half Sine,11ms
Certification
CE, FCC Class B
Dimension (W x D x H)
231mm x 160mm x 80mm
Weight
7.7lbs (3.5Kgs)

ERS-CDVE
8 ERS-CDVE Quick Reference Guide
1.4 System Overview
1.4.1 Front & Top View

Quick Reference Guide
ERS-CDVE Quick Reference Guide
9
1.4.2 Front View
1.4.3 Rear View

ERS-CDVE
10 ERS-CDVE Quick Reference Guide
Connectors
Label
Function
Note
COM1
Serial port connector 1
COM3~10
Serial port connector 3~10
DC-IN
DC power-in connector
DC-OUT
DC power-out connector
LAN
RJ-45 Ethernet
44-pin Multi-function
Multi-Function Port combined COM2,
2 PS/2, Audio, GPIO and SMBus
USB
USB connector
VGA
VGA connector
Swappable Drawer
2.5” Driver Bay and SIM Card
LPT Port
LPT connector
LVDS Port
LVDS connector
Power Switch
Power-in connector

Quick Reference Guide
ERS-CDVE Quick Reference Guide
11
2.Hardware
Configuration
Jumper and Connector Setting, Driver and BIOS Installing
For advanced information, please refer to:
1- EBM-CDVS and AUX-M03 included in this manual.
Note: If you need more information, please visit our website:
http://www.avalue.com.tw

ERS-CDVE
12 ERS-CDVE Quick Reference Guide
2.1 ERS-CDVE connector mapping
2.1.1 External Serial Port 1/3/4/5/6/7/8/9/10 connector (COM1/3/4/5/6/7/8/9/10)
-
Signal
PIN
PIN
Signal
NDCDA#_485TXN
1
6
NDSRA#
NRXDA#_485TXP
2
7
NRTSA#
NTXDA#_485RXP
3
8
NCTSA#
NDTRA#_485RXN
4
9
NRIA#
GND
5
2.1.2 VGA connector (VGA)
PIN
Signal
PIN
Signal
PIN
Signal
1
RED
6
GND
11
NC
2
GREEN
7
GND
12
SDT_DDC
3
BLUE
8
GND
13
VGA_HS
4
NC
9
+5V
14
VGA_VS
5
GND
10
GND
15
SCK_DDC

Quick Reference Guide
ERS-CDVE Quick Reference Guide
13
2.1.3 LPT connector (LPT Port)
Signal
PIN
PIN
Signal
STB-
1
14
LPT_AFD#
PD0
2
15
LPT_ERR#
PD1
3
16
LPT_INIT#
PD2
4
17
LPT_SLIN#
PD3
5
18
GND
PD4
6
19
GND
PD5
7
20
GND
PD6
8
21
GND
PD7
9
22
GND
LPT_ACK#
10
23
GND
LPT_BUSY
11
24
GND
LPT_PE
12
25
GND
LPT_SLCT
13
2.1.4 LVDS connector (LVDS Port)
PIN
Signal
PIN
Signal
PIN
Signal
1
3.3V
16
LVDS_DATA2_P
31
NC
2
3.3V
17
LVDS_DATA2_N
32
NC
3
GND
18
GND
33
GND
4
LVDS_DDC_DATA
19
LVDS_DATA3_P
34
LVDS_CLKP
5
LVDS_DDC_CLK
20
LVDS_DATA3_N
35
LVDS_CLKN
6
GND
21
GND
36
GND
7
LVDS_DATA0_P
22
LVDS_DATA3_P
37
NC
8
LVDS_DATA0_N
23
LVDS_DATA3_N
38
NC
9
GND
24
GND
39
GND
10
LVDS_DATA1_P
25
NC
40
BKL1_5V
11
LVDS_DATA1_N
26
NC
41
BKL1_Bright
12
GND
27
GND
42
BKL1_BKLTEN
13
12V
28
NC
43
BKL1_GND
14
5V
29
NC
44
BKL1_12V
15
5V
30
GND

ERS-CDVE
14 ERS-CDVE Quick Reference Guide
2.1.4 Multi-Function Port combined COM2, 2 PS/2, Audio, GPIO and SMBus
(Multi-function port)
PIN
Signal
PIN
Signal
PIN
Signal
1
LINE1_JD
16
FRONT_JD
31
LINE1_RIN
2
MIC1_JD
17
LINEOUT_R
32
GND
3
MIC_RIN
18
GND
33
LINE1_LIN
4
GND
19
LINEOUT_L
34
+5V
5
MIC_LIN
20
GND
35
DO3
6
DO5
21
DO4
36
DO0
7
DO2
22
DO1
37
DI3
8
DI5
23
DI4
38
DI0
9
DI2
24
DI1
39
SMB_CLK
10
MSCK
25
SMB_DATA
40
NRIB#
11
GND
26
GND
41
NRTSB#
12
MSDA
27
NCTSB#
42
COM2_GND
13
KBDA
28
NDSRB#
43
NTXDB_485RXP
14
VCC_PS2
29
NDTRB#_485RXN
44
NDCDB#_485TXN
15
KBCK
30
NRXDB_485TXP

Quick Reference Guide
ERS-CDVE Quick Reference Guide
15
2.1.4.1 GPIO+SMBUS
Signal
PIN
PIN
Signal
25
13
24
12
23
11
22
10
SMBUS_DATA
21
9
SMBUS_CLK
20
8
GND
GPI-D5
19
7
5V
GPI-D4
18
6
GPO-D5
GPI-D3
17
5
GPO-D4
GPI-D2
16
4
GPO-D3
GPI-D1
15
3
GPO-D2
GPI-D0
14
2
GPO-D1
1
GPO-D0
2.1.4.2 COM2
Signal
PIN
PIN
Signal
DSR
6
1
DCD
RTS
7
2
RxD
CTS
8
3
TxD
RI
9
4
DTR
5
GND

ERS-CDVE
16 ERS-CDVE Quick Reference Guide
2.2 EBM-CDVS and AUX-M03 Overviews
2.2.1 EBM-CDVS

Quick Reference Guide
ERS-CDVE Quick Reference Guide
17

ERS-CDVE
18 ERS-CDVE Quick Reference Guide
2.2.2 AUX-M03
2.3 EBM-CDVS Jumper & Connector list
Jumpers
Label
Function
Note
CMOS1
Clear CMOS
3 x 1 header, pitch 2.54mm
JRI1/2
COM 1/2 pin 9 signal select
3 x 2 header, pitch 2.00mm
Connectors
Label
Function
Note
USB_REAR
USB connector
USB_FRONT
USB connector
LAN1
LAN connector
CRT1
VGA connector
DB-44
Multi-function port
1. COM2
2. Audio(line-in, line-out,
mic-in)
3. 2 x PS/2 for KB/MS,
4. 12 bit GPIO/SMBUS
COM1
Serial port connector 1
DCJACK
DC-IN connector

Quick Reference Guide
ERS-CDVE Quick Reference Guide
19
MPCIE1/2
Mini PCI Express connector 1/2
52pin
PWR1
Power connector
PWRBTN
Power button
RSTBTN
Reset button
LED_PWR
LED Power
LED_HD
LED HDD
LED_ACK
LED LAN
LED_SPD_LNK
LED LAN
SIMCARD
SIM card slot
LVDS1
LVDS connector
SODIMM1
DDR3 SODIMM connector
MIOE_CB
IET Expansion slot
LPC1
Low pin count interface
7 x 2 header, pitch 2.00 mm
SPI1
SPI connector
4 x 2 header, pitch 2.00 mm
PWR1
Power connector
4 x 1 wafer, pitch 2.50 mm
BKL1
LCD inverter connector
5 x 1 wafer, pitch 2.00 mm
JVR
LCD backlight brightness adjustment
3 x 1 header, pitch 2.54 mm
CN1
Front Panel Connector 1
5 x 1 wafer, pitch 2.00 mm
CN2
Front Panel Connector 2
8 x 1 wafer, pitch 2.00 mm
DCOUT_S
DC Output connector
6 x 1 wafer, pitch 2.00 mm
SW1
AT/ATX mode selector
2.4 AUX-M03 Connector list
Connectors
Label
Function
Note
WRSTBTN1
Reset button
WJPRT1
LPT Port
13 x 2 header, pitch 2.00mm
WCN1
System reset
2 x 1 wafer, pitch 2.50mm
WUSB_REAR
USB connector
COM3_7
Serial port connector 3 & 7
COM4_8
Serial port connector 4 & 8
COM5_9
Serial port connector 5 & 9
COM6_10
Serial port connector 6 & 10
WMIOE_IO
IET Expansion slot

ERS-CDVE
20 ERS-CDVE Quick Reference Guide
2.5 EBM-CDVS Jumpers & Connectors settings
2.5.1 Clear CMOS (CMOS1)
*Default
Protect*
Clear CMOS
2.5.2 COM 1/2 pin 9 signal select (JRI1/2)
* Default
Ring*
+5V
+12V
JRI2
JRI1