Avalue Technology BMX-T522-SK User manual

Part No. E2017BMSKA0R
BMX-T522-SK
Fanless Intel® 6th Gen Core™ SoC i7/i5/i3 & Celeron®
Processor Mini ITX Box PC
Quick Reference Guide
1st Ed –07 June 2017
Copyright Notice
Copyright 2017 Avalue Technology Inc., ALL RIGHTS RESERVED.

BMX-T522-SK
2 BMX-T522-SK Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Copyright Notice
Copyright 2017 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.

Quick Reference Guide
BMX-T522-SK Quick Reference Guide
3
CONTENT
1. Getting Started............................................................................................................4
1.1 Safety Precautions ................................................................................................4
1.2 Packing List...........................................................................................................4
1.3 System Specifications ...........................................................................................5
1.4 System Overview...................................................................................................8
1.4.1 Front/Rear/Side View................................................................................................................... 8
1.5 System Dimensions.............................................................................................10
2. Hardware Configuration...........................................................................................11
2.1 BMX-T522-SK connector mapping......................................................................12
2.1.1 Serial port 1~6 connector (COM1~6)......................................................................................... 12
2.1.2 General purpose I/O connector 1 (GPIO1)................................................................................ 12
2.1.3 General purpose I/O connector 2 (GPIO2)................................................................................ 13
2.2 Installing SD card (BMX-T522-SK)......................................................................14
2.3 Installing Hard Disk (BMX-T522-SK)...................................................................15

BMX-T522-SK
4 BMX-T522-SK Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x BMX-T522-SK
Other major components include the followings:
—Adapter
—Power Cord

Quick Reference Guide
BMX-T522-SK Quick Reference Guide
5
1.3 System Specifications
System
Mother Board
EMX-SKLUP
CPU
Onboard Intel® 6th Gen Core™ SoC i7/i5/i3 & Celeron® Processor
CPU Cooler (Type)
Fanless
Memory
2 x 260-pin DDR4 2133 MHz SO-DIMM socket, supports up to
32GB Max (non ECC only) (Default: 1 x 4GB DDR4)
Adapter
60W Adapter (DC in 12V@5A)
Microphone
1 x Mic-in
Bluetooth
By M.2 module (optional)
Operating System
Windows
Other Component
1 x SIM card slot
Storage
Hard Disk Drive
2 x 2.5” HDD/SSD Internal Bracket
External I/O
Serial Port
6 x RS-232
USB Port
4 x USB3.0, 4 x USB2.0
DIO Port
2 x 8-bit GPIO (by external DB9 cable)
Video Port
1 x DP++, 1 x HDMI, 1 x DP
Audio Port
1 x Line-out, 1 x Mic-in
LAN Port
1 x Intel® i211AT
1 x Intel® i219LM
Wireless LAN Antenna
2 x SMA Connector (Optional)
Switch
1 x Power on/off membrane with Power LED
Indicator Light
1 x HDD/SSD LED,
2 x LAN Activity Indicator LED
Expansion Slots
1 x M.2 Type B 3042/2242/2260/2280 with 1 x SIM card slot,
supports WWAN+GNSS or SSD.
1 x M.2 Type A 2230 supports WiFi module
1 x SD card slot
Mechanical
Power Type
AT/ATX mode Switchable Through Jumper (Default: ATX mode)
Power Connector Type
Lockable DC Jack
Dimension
180 x 182 x 76 (L x W x H)
Weight
2.3 kg
Color
Black
Fanless
Yes

BMX-T522-SK
6 BMX-T522-SK Quick Reference Guide
OS Support
Windows
Reliability
EMI Test
CE/FCC Class B design compatible
Safety
UL/CB design compatible
Vibration Test
Sine Vibration test (Non-operation)
Reference IEC60068-2-6 Testing procedures
Test Fc : Vibration sinusoidal
1 Test Acceleration : 2G
2 Test frequency : 5 ~ 500 Hz
3 Sweep：1 Oct/ per one minute. (logarithmic)
4 Test Axis : X,Y and Z axis
5 Test time :30 min. each axis
6 System condition : Non-Operating mode
Package Vibration Test
Reference IEC60068-2-64 Testing procedures
Test Fh : Vibration boardband random Test
1. PSD: 0.026G²/Hz , 2.16 Grms
2. Non-operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 min. per each axis
Random Vibration Operation
Reference IEC60068-2-64 Testing procedures
Test Fh : Vibration boardband random Test
1. PSD: 0.00454G²/Hz, 1.5 Grms
2. Operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 minutes per each axis
6. IEC 60068-2-64 Test: Fh
7. Storage : SSD or M.2
Mechanical Shock Test
Bump Test
Reference IEC 60068-2-29 Testing procedures
Test Eb : Bump Test
1. Wave form：Half Sine wave
2. Acceleration Rate：10g for operation mode
3. Duration Time：11ms
4. No. of Shock：Z axis 300 times

Quick Reference Guide
BMX-T522-SK Quick Reference Guide
7
5. Test Axis: Z axis
6. Operation mode
Drop Test
Packing Drop
Reference ISTA 2A, Method : IEC-60068-2-32 Test:Ed Test Ea :
Drop Test
1. One corner , three edges, six faces
2. ISTA 2A, IEC-60068-2-32 Test:Ed
Operating Temperature
0°C ~ 55°C (32°F ~ 131°F) (w/SSD, M.2), ambient w/ air flow
Operating Humidity
0% ~ 90% Relative Humidity, Non-condensing
Storage Temperature
-20°C ~ 75°C (-4°F ~ 167°F)
Note:
Specifications are subject to change without notice.

BMX-T522-SK
8 BMX-T522-SK Quick Reference Guide
1.4 System Overview
1.4.1 Front/Rear/Side View

Quick Reference Guide
BMX-T522-SK Quick Reference Guide
9
Connectors
Label
Function
Note
Power
Power on button
HDD
HDD Indicator
LAN1/2
RJ-45 Ethernet 1/2
USB2.0
4 x USB2.0 connector
USB3.0
4 x USB3.0 connector
COM1~6
Serial port 1~6 connector
DCIN
DC power-in connector
HDMI
HDMI connector
DP1/2
DP connector 1/2
Line-out
Line-out audio jack
Mic-in
Mic-in audio jack
GPIO1/2
General purpose I/O connector 1/2
SD
SD card slot

BMX-T522-SK
10 BMX-T522-SK Quick Reference Guide
1.5 System Dimensions
(Unit: mm)

Quick Reference Guide
BMX-T522-SK Quick Reference Guide
11
2.Hardware
Configuration
For advanced information, please refer to:
1- EMX-SKLUP User’s Manual
Note: If you need more information, please visit our website:
http://www.avalue.com.tw

BMX-T522-SK
12 BMX-T522-SK Quick Reference Guide
2.1 BMX-T522-SK connector mapping
2.1.1 Serial port 1~6 connector (COM1~6)
Signal
PIN
PIN
Signal
DCD
1
6
DSR
RXD
2
7
RTS
TXD
3
8
CTS
DTR
4
9
RI
GND
5
2.1.2 General purpose I/O connector 1 (GPIO1)
Signal
PIN
PIN
Signal
DI0
1
6
DO2
DO0
2
7
DI3
DI1
3
8
DO3
DO1
4
9
GND
DI2
5

Quick Reference Guide
BMX-T522-SK Quick Reference Guide
13
2.1.3 General purpose I/O connector 2 (GPIO2)
Signal
PIN
PIN
Signal
DI4
1
6
DO6
DO4
2
7
DI7
DI5
3
8
DO7
DO5
4
9
GND
DI6
5

BMX-T522-SK
14 BMX-T522-SK Quick Reference Guide
2.2 Installing SD card (BMX-T522-SK)
Step1. Insert SD card into SD slot.

Quick Reference Guide
BMX-T522-SK Quick Reference Guide
15
2.3 Installing Hard Disk (BMX-T522-SK)
Step1. Remove 10 screws from rear and each side before removing back cover.
Step2. Secure HDD by means of 8 screws.
Step3. Re-assemble your system back through previous steps to complete the installation.