Avalue Technology EBM-PNV User manual

Part No. E2047581401R
EBM-PNV
Intel® Atom™Dual-Core 5.25”Mini Module with Intel®
ICH8-M Chipset
User’s Manual
1st Ed –22 August 2011

EBM-PNV User’s Manual
2 EBM-PNV User‟s Manual
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2011 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that

User’s Manual
EBM-PNV User‟s Manual
3
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
Avalue Technology‟s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to
perform can be reasonably expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
A Message to the Customer
Avalue Customer Services
Each and every Avalue‟s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue‟s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user‟s manual
first.
To receive the latest version of the user‟s manual; please visit our Web site at:
http://www.avalue.com.tw/

EBM-PNV User’s Manual
4 EBM-PNV User‟s Manual
If you still cannot find the answer, gather all the information or questions that apply to your
problem, and with the product close at hand, call your dealer. Our dealers are well trained
and ready to give you the support you need to get the most from your Avalue‟s products. In
fact, most problems reported are minor and are able to be easily solved over the phone.
In addition, free technical support is available from Avalue‟s engineers every business day.
We are always ready to give advice on application requirements or specific information on
the installation and operation of any of our products. Please do not hesitate to call or e-mail
us.
Headquarters and Branch
Avalue USA
Avalue Technology Inc.
7F, 228, Lian-cheng Road, Chung Ho City, Taipei,
Taiwan
Tel:[phone]
Fax: [phone]
Information:[e-mail]
Service: [e-mail]
Avalue Technology Inc.
9 Timber Lane, Marlboro, NJ 07746-1443
Tel: [phone]
Fax: [phone]
Information: [e-mail]
Service: [e-mail]
BCM Advanced Research
Avalue Europe
BCM Advanced Research
an Avalue Company
7 Marconi, Irvine, CA92618
Tel: [phone]
Fax: [phone]
Information: [e-mail]
Web: www.bcmcom.com
Avalue Europe A/S
Moelledalen 22C, 3140
Aalsgaarde, Denmark
Tel: [phone]
Fax:[phone]
Information: sales.e[email protected]
Service: service.europ[email protected]
Avalue China
Avalue Japan
Avalue Technology Inc.
Room 805, Building 9,No.99 Tianzhou Rd.,
Caohejing Development Area,
Xuhui District, Shanghai
Tel: [phone]
Fax:[phone]
Information: sales.chi[email protected]
Service: [e-mail]
Avalue Technology Inc.
2F keduka-Bldg, 2-27-3 Taito,
Taito-Ku, Tokyo 110-0016 Japan
Tel: [phone]
Fax: [phone]
Information: sales.japa[email protected]
Service: [e-mail]

User’s Manual
EBM-PNV User‟s Manual
5
Product Warranty
Avalue warrants to you, the original purchaser, that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by people
other than repair personnel authorized by Avalue, or that have been subject of misuse,
abuse, accident or improper installation. Avalue assumes no liability under the terms of this
warranty as a consequence of such events. Because of Avalue‟s high quality-control
standards and rigorous testing, most of our customers never need to use our repair service.
If any of Avalue‟s products is defective, it will be repaired or replaced at no charge during
the warranty period. For out-of-warranty repairs, you will be billed according to the cost of
replacement materials, service time, and freight. Please consult your dealer for more
details. If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU type and
speed, Avalue‟s products model name, hardware & BIOS revision number, other
hardware and software used, etc.) Note anything abnormal and list any on-screen
messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and any
helpful information available.
3. If your product is diagnosed as defective, obtain an RMA (return material authorization)
number from your dealer. This allows us to process your good return more quickly.
4. Carefully pack the defective product, a complete Repair and Replacement Order Card
and a photocopy proof of purchase date (such as your sales receipt) in a shippable
container. A product returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to your
dealer.

EBM-PNV User’s Manual
6 EBM-PNV User‟s Manual
Contents
1. Getting Started............................................................................................................9
1.1 Safety Precautions....................................................................................................9
1.2 Packing List...............................................................................................................9
1.3 Document Amendment History ...............................................................................10
1.4 Manual Objectives...................................................................................................11
1.5 System Specifications.............................................................................................12
1.6 Architecture Overview –Block Diagram..................................................................14
2. Hardware Configuration...........................................................................................15
2.1 Product Overview....................................................................................................16
2.2 Installation Procedure .............................................................................................17
2.2.1 Main Memory.................................................................................................................................. 18
2.3 Jumper and Connector List.....................................................................................20
2.4 Setting Jumpers & Connectors ...............................................................................22
2.4.1 Clear CMOS (JBAT)....................................................................................................................... 22
2.4.2 Multi-function select (SW1) ............................................................................................................ 22
2.4.3 Serial port 1/ 2 - RS-232/ 422/ 485 mode select (SW2)................................................................. 23
2.4.4 Serial port 1/ 2 pin9 signal select (JRI1/ JRI2)............................................................................... 23
2.4.5 Serial port 1/ 2 RS-232/ 422/ 485 mode select (JP1/ JP2)............................................................ 24
2.4.6 SATA DOM Pin 7 Power mode selector (JP4)............................................................................... 24
2.4.7 Battery connector (BAT)................................................................................................................. 25
2.4.8 LCD backlight brightness adjustment (JVR1) ................................................................................ 26
2.4.9 LCD backlight brightness adjustment (JVR2) ................................................................................ 27
2.4.10 Power connector (PWR2).......................................................................................................... 28
2.4.11 Serial ATA power connector (S_PWR1).................................................................................... 28
2.4.12 LCD Inverter connector (JBKL1/ JBKL2)................................................................................... 29
2.4.12.1 Signal Description –LCD Inverter Connector (JBKL1/ JBKL2) .............................................................29
2.4.13 Optional LPT connector (PRINT)............................................................................................... 30
2.4.14 Serial port 1 connector (COM1)................................................................................................. 31
2.4.15 CPU fan connector (CPU_FAN) ................................................................................................ 32
2.4.16 Audio connector (JAUDIO) ........................................................................................................ 32
2.4.17 Serial port 2 connector (JCOM2)............................................................................................... 33
2.4.18 Serial port 3/ 4/ 5/ 6 connector (JCOM3/ JCOM4/ JCOM5/ JCOM6) ........................................ 34
2.4.19 General purpose I/O connector (JDIO)...................................................................................... 34
2.4.20 LED indicator connector (JLED) ................................................................................................ 35
2.4.21 LVDS connector (JLVDS1)........................................................................................................ 36
2.4.21.1 Signal Description –LVDS Connecter (JLVDS).................................................................................36

User’s Manual
EBM-PNV User‟s Manual
7
2.4.22 LVDS connector (JLVDS2)........................................................................................................ 37
2.4.23 Touch panel connector (JTOUCH) ............................................................................................ 38
2.4.24 USB connector 4&5, 2&3, 6&7 (JUSB1/ JUSB2)....................................................................... 38
2.4.25 USB connector 9 (JUSB4)......................................................................................................... 39
2.4.26 OSD for front panel key (JKEY)................................................................................................. 39
3. BIOS Setup...................................................................................................................40
3.1 Introduction .............................................................................................................41
3.2 Starting Setup .........................................................................................................41
3.3 Using Setup ............................................................................................................42
3.4 Getting Help............................................................................................................43
3.5 In Case of Problems................................................................................................43
3.6 BIOS setup..............................................................................................................44
3.6.1 Main Menu...................................................................................................................................... 44
3.6.1.1 System Time ........................................................................................................................................44
3.6.1.2 System Date .........................................................................................................................................44
3.6.2 Advanced Menu ............................................................................................................................. 45
3.6.2.1 CPU Configuration ..............................................................................................................................46
3.6.2.2 IDE Configuration................................................................................................................................47
3.6.2.2.1 AHCI Configuration.............................................................................................................................48
3.6.2.3 Super I/O Configuration.......................................................................................................................49
3.6.2.4 Hardware Health Configuration...........................................................................................................50
3.6.2.5 ACPI Settings.......................................................................................................................................50
3.6.2.5.1 General ACPI Configuration................................................................................................................51
3.6.2.5.2 Advanced ACPI Configuration............................................................................................................52
3.6.2.5.3 Chipset ACPI Configuration................................................................................................................53
3.6.2.6 USB Configuration ..............................................................................................................................54
3.6.2.7 APM Configuration..............................................................................................................................55
3.6.3 Advanced PCI/ PnP Settings ......................................................................................................... 56
3.6.4 Boot Settings.................................................................................................................................. 57
3.6.4.1 Boot Settings Configuration....................................................................................................... 58
3.6.4.2 Boot Device Priority ................................................................................................................... 59
3.6.4.3 Hard Disk Devices ..................................................................................................................... 59
3.6.4.4 Removable Devices................................................................................................................... 60
3.6.5 Security Settings ............................................................................................................................ 60
3.6.5.1 Change Supervisor/ User Password.......................................................................................... 61
3.6.5.2 Clear User Password................................................................................................................. 62
3.6.5.3 Boot Sector Virus Protection...................................................................................................... 62
3.6.6 Advanced Chipset Settings............................................................................................................ 63
3.6.6.1 North Bridge Configuration ........................................................................................................ 64
3.6.6.1.1 Video Function Configuration................................................................................................ 65

EBM-PNV User’s Manual
8 EBM-PNV User‟s Manual
3.6.6.2 South Bridge Configuration........................................................................................................ 67
3.6.7 Exit Options.................................................................................................................................... 68
3.6.7.1 Save Changes and Exit ............................................................................................................. 68
3.6.7.2 Discard Changes and Exit ......................................................................................................... 69
3.6.7.3 Discard Changes ....................................................................................................................... 69
3.6.7.4 Load Optimal Defaults ............................................................................................................... 70
3.6.7.5 Load Failsafe Defaults............................................................................................................... 70
4. Drivers Installation.......................................................................................................71
4.1 Install Chipset Driver (For Intel ICH8-M) .................................................................72
4.2 Install Display Driver (For Intel Pineview)................................................................73
4.3 Install Audio Driver (For Realtek ALC888)..............................................................74
4.4 Install Ethernet Driver (For Intel 82574L)................................................................75
5. Mechanical Drawing ....................................................................................................77

User’s Manual
EBM-PNV User‟s Manual
9
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x EBM-PNV with Intel® Atom™Dual Core & DDR3 SDRAM Mini
Module
1 x DVD-ROM or CD-ROM contains the followings:
—User‟s Manual (this manual in PDF file)
—Ethernet driver and utilities
—VGA drivers and utilities
—Audio drivers and utilities

EBM-PNV User’s Manual
10 EBM-PNV User‟s Manual
1.3 Document Amendment History
Revision
Date
Comment
1st
August 2011
Initial Release

User’s Manual
EBM-PNV User‟s Manual
11
1.4 Manual Objectives
This manual describes in details Avalue Technology EBM-PNV Single Board.
We have tried to include as much information as possible but we have not duplicated
information that is already being provided in the standard IBM Technical References,
unless it proved to be necessary to aid in the understanding of this board.
We strongly recommend that you study this manual carefully before attempting to interface
with EBM-PNV series or change the standard configurations. Whilst all the necessary
information is available in this manual we would recommend that unless you are confident,
you contact your supplier for guidance.
Please be aware that it is possible to create configurations within the CMOS RAM that
make booting impossible. If this should happen, clear the CMOS settings, (see the
description of the Jumper Settings for details).
If you have any suggestions or find any errors concerning this manual and want to inform
us of these, please contact our Customer Service department with the relevant details.

EBM-PNV User’s Manual
12 EBM-PNV User‟s Manual
1.5 System Specifications
System
CPU
Onboard Intel® Atom™ D525 Dual-Core 1.8GHz CPU
800 MHz
FSB
BIOS
AMI 8Mbit Flash BIOS
System Chipset
Intel® ICH8-M Chipset (2.4W)
I/O Chip
Winbond W83627DHG-P
System Memory
Onboard 1GB DDR3 SDRAM & One 204-pin SODIMM Supports Up to
3GB DDR3
SSD
One CompactFlash Type I/II Socket
Watchdog Timer
Reset: 1 ~ 255min. and 1sec. or 1min./step
H/W Status Monitor
Monitoring System Temperature, Voltage, and Cooling
Fan Status. Auto Trotting Control when CPU Overheats
Expansion
Two Mini PCIe Slots (One Supports optional Mini Card DOM)
I/O
MIO
1 x SATA (SATA 2 or SATA 3) optional, 1 LPT (Option), 2 x
RS-232/422/485,
4 x RS-232 (Option), 1 x K/B & Mouse (Option)
USB
7 x USB 2.0
DIO
16-bit General Purpose I/O for DI and DO 8-bit Parallel Port Data
Display
Chipset
Intel® Pineview™ Integrated, Gen3.5 + GFX Core @ 400MHz
Resolution
CRT Mode : Up to 2048 x 1536 @ 60Hz
LCD/ Simultaneous Mode: Up to 1366 x 768 @ 75Hz
Multiple Display
CRT + LVDS, LVDS + LVDS
LVDS
1 x 18-bit, 2 x 18/24-bit LVDS
Backlight Control
VR, PWM (Setting by BIOS)
Touch Screen Interface (Optional)
Chipset
ETP-CP-S458XRU
Touch Screen Interface
With 5-pin 2.54mm Pin Header (Can be Selected to Support 4/5-wire
Touch Screen)

User’s Manual
EBM-PNV User‟s Manual
13
Audio
HD Codec
Realtek ALC888 Supports 5.1-CH Audio
Audio Interface
Mic-in, Line-in, Line-out
Audio Amplifier
2 x 2W
Ethernet
LAN 1
Intel® 82574L PCI-E Gigabit Ethernet
LAN 2
Intel® 82574L PCI-E Gigabit Ethernet
(Optional 1 x PS/2 Keyboard & Mouse)
Ethernet Interface
1000 Base-Tx Gigabit Ethernet Compatible
Mechanical & Environmental
Power Consumption
+12V @ 1.80A
Power Type
+12V ~ +28V Power Input AT/Adapter
Operation Temperature
0 ~ 60°C (32 ~ 140°F)
Operating Humidity
0% ~ 90% Relative Humidity, Non-condensing
Size ( L x W )
8” x 5.75” x 0.75” (203mm x 146mm x 19mm)
Weight
0.55lb (0.25kg)

EBM-PNV User’s Manual
14 EBM-PNV User‟s Manual
1.6 Architecture Overview –Block Diagram
The following block diagram shows the architecture and main components of EBM-PNV.

User’s Manual
EBM-PNV User‟s Manual
15
2. Hardware
Configuration

EBM-PNV User’s Manual
16 EBM-PNV User‟s Manual
2.1 Product Overview

User’s Manual
EBM-PNV User‟s Manual
17
2.2 Installation Procedure
This chapter provides you the instructions on how to setup your system.
1. Turn off the power supply.
2. Insert the SODIMM module (be careful with the orientation).
3. Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat
panel. A CRT monitor must be connected in order to change CMOS settings to support
flat panel.
4. Connect power supply to the board via the ATXPWR.
5. Turn on the power.
6. Enter the BIOS setup by pressing the delete key during boot up. Use the “LOAD BIOS
DEFAULTS” feature. The Integrated Peripheral Setup and the Standard CMOS Setup
Window must be entered and configured correctly to match the particular system
configuration.
7. If TFT panel display is to be utilized, make sure the panel voltage is correctly set before
connecting the display cable and turning on the power.
Note: Make sure the heat sink and the CPU top surface are in total contact to
avoid CPU overheating problem that would cause the system to hang or
show instability.

EBM-PNV User’s Manual
18 EBM-PNV User‟s Manual
2.2.1 Main Memory
EBM-PNV provides Onboard 1GB DDR3 SDRAM and One 204-pin SODIMM Supporting
Up to 3GB DDR3
Make sure to unplug the power supply before adding or removing SODIMMs
or other system components. Failure to do so may cause severe damage to
both the board and the components.
Locate the SODIMM socket on the board.
Hold two edges of the SODIMM module carefully. Avoid touching its connectors.
SODIMM

User’s Manual
EBM-PNV User‟s Manual
19
Align the notch key on the module with the rib on the slot.
Firmly press the modules into the socket which automatically snaps into the mounting
notch. Do not force the SODIMM module in with extra force as the SODIMM module
only fits in one direction.
To remove SODIMM modules, simultaneously push the two ejector tabs outward,
then pull out the SODIMM module.
Note:
(1) Please do not change any DDR3 SDRAM parameter in BIOS setup to increase
your system‟s performance without acquiring technical information in advance.
(2) Static electricity can damage the electronic components of the computer or
optional boards. Before proceeding, ensure that you are discharged of static
electricity by briefly touching a grounded metal object.
Mounting Notch
Notch Key
Ejector
Tab
204-pin DDR3 SODIMM

EBM-PNV User’s Manual
20 EBM-PNV User‟s Manual
2.3 Jumper and Connector List
You can configure your board to match the needs of your application by setting jumpers. A
jumper is the simplest kind of electric switch.
It consists of two metal pins and a small metal clip (often protected by a plastic cover) that
slides over the pins to connect them. To “close” a jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1,
2, and 3. In this case, you would connect either two pins.
The jumper settings are schematically depicted in this manual as follows:
A pair of needle-nose pliers may be helpful when working with jumpers.
Connectors on the board are linked to external devices such as hard disk drives, a
keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to
configure your system to suit your application.
If you have any doubts about the best hardware configuration for your application, contact
your local distributor or sales representative before you make any changes.
The following tables list the function of each of the board‟s jumpers and connectors.
Jumpers
Label
Function
Note
JBAT
Clear CMOS
3 x 1 header, pitch 2.54mm
JP1
Serial port 1 –RS232/ 422/ 485 mode select
4 x 3 header, pitch 2.0mm
JP2
Serial port 2 –RS232/ 422/ 485 mode select
4 x 3 header, pitch 2.0mm
JP4
SATA DOM Pin 7 Power mode selector
3 x 1 header, pitch 2.0mm
JRI1
Serial port 1 pin9 signal select
3 x 2 header, pitch 2.0mm
JRI2
Serial port 2 pin9 signal select
3 x 2 header, pitch 2.0mm
JVR1
LCD backlight brightness adjustment
3 x 2 header, pitch 2.0mm
JVR2
LCD backlight brightness adjustment
3 x 2 header, pitch 2.0mm
SW1
Multi-function select
DIP switch 6pin
SW2
Serial port 1/ 2 –RS232/ 422/ 485 mode
select
DIP switch 6pin