Avantco Equipment 177CNVYOV14B User manual

USER MANUAL
Adjustable Speed Conveyor Toasters
177CNVYOV14B - 208V 3500W (14”wide belt) 177CNVYOV14D - 240V3600W (14”wide belt)
177CNVYOV10A - 120V 1700W (10.5”wide belt) 177CNVYOV10B - 208V 2800W (10.5”wide belt)
177CNVYOV10D - 240V 2800W (10.5”wide belt)
05/2020

Important Safety Informa . ......... 2
Circuit Diagram ....................... 3-4
3
Before Using Your Oven................ 4
Using Your Oven . .................... 4
Cleaning & Maintenance . .............. 5
Limited Warranty...................... 5
Sa .........................
INDEX
1.
5
5
7
6
7
Conveyor Oven ........
Conveyor O v e n ....

When using electrical appliances, basic safety pr ways be followed,
including the following:
1. R refully and completely.
2. For commercial use only.
3. DO NOT touch hot surfaces.
4. Protect against electrical shock by keeping all cords, plugs, and other electrical
components away from water or other liquids.
5. Unplug this unit when not in use and before cleaning.
6. Allow the unit to cool befor r taking o parts.
7. DO NOT operate this or any appliance with a damaged electrical cord or plug.
8. DO NOT operate this or any appliance a er r has been
damaged in any way.
9. DO NOT use outdoors.
10. DO NOT place on or near a hot gas or electric burner.
11. A c rst, then plug electrical cord into the wall outlet.
12. Disconnect the unit by removing the electrical plug from the wall outlet.
13. DO NOT use appliance for any applica other than intended use.
14. DO NOT insert metal utensils or oversized foods into this unit, as they may cause
re and heighten the risk of electrical shock.
15. DO NOT store any item on top of this unit when in opera .
16. DO NOT allow this oven to touch or to be covered by aterial,
such as curtains, draperies, walls, etc., when in opera .
17. DO NOT clean with metal scouring pads, as pieces can break o and touch electrical
components, heightening the risk of electrical shock
18. Never place materials such as paper, cardboar etc. in this oven.
19. DO NOT cover interior of this unit with metal foil, as it may cause the oven to overheat.
20. Avoid scratching the surface or nicking the edges of this unit. If the oven is damaged
or broken, contact customer service before use.
21. Turn o the appliance by removing the plug from the wall outlet.
22. Note that the use of accessories not recommended by the manufacturer
may result in injury.
23. Children should be supervised to ensure that they DO NOT play with the oven.
24. This appliance is not intended for use by persons (including children) with reduced
physical sensory or men r lack of experience and knowledge,
unless a person responsible for their safety has given them supervision or
concerning use of the appliance.
25. When using the appliance in shops, snack bars, hotels etc., check the voltage and
outlet to make sure the appliance is correctly connected with power.
26. Plac at surface that is well ven ated. The appliance must be supervised
during opera . DO NOT leave appliance without powering o .
NOTE: Sav for future reference.
SAFETY
2.

3.
CIRCUIT DIAGRAM
ADJUSTABLE THERMOSTAT TOP ELEMENTS
B1
CONVEYOR SPEED CONTROL
SC
COOLING FAN 240V
CF
CONVEYOR MOTOR 240V
M1
L1
208V or 240V
60Hz
L2 E
8
M
CONVEYOR OVEN
LEGEND
SW
E1 / E2
MAIN SWITCH
TOP ELEMENT - 900W / 120V OR 875W / 100V
BOTTOM ELEMENT 900W / 120V OR 875W / 100V
DESCRIPTION
E3 / E4
CF
CIRCUIT DIAGRAM
177CNVYOV14B-208V
177CNVYOV14D-240V
(M1)
ADJUSTABLE THERMOSTAT BOTTOM ELEMENTS
B2
SC
B1 B2
E1
E2
E3
E4
ADJUSTABLE THERMOSTAT TOP ELEMENTS
B1
CONVEYOR SPEED CONTROL
SC
COOLING FAN 240V
CF
CONVEYOR MOTOR 240V
M1
L1
208V or 240V
60Hz
L2 E
8
M
CONVEYOR OVEN
LEGEND
SW
E1 / E2
MAIN SWITCH
TOP ELEMENT - 700W / 120V OR 700W / 100V
BOTTOM ELEMENT 700W / 120V OR 700W / 100V
DESCRIPTION
E3 / E4
CF
CIRCUIT DIAGRAM
177CNVYOV10B-208V
177CNVYOV10D-240V
(M1)
ADJUSTABLE THERMOSTAT BOTTOM ELEMENTS
B2
SC
B1 B2
E1
E2
E3
E4

4.
CIRCUIT DIAGRAM
4.
ADJUSTABLE THERMOSTAT TOP ELEMENTS
B1
CONVEYOR SPEED CONTROL
SC
COOLING FAN 120V
CF
CONVEYOR MOTOR 120V
M1
L1
120V
60Hz
L2 E
8
M
CONVEYOR OVEN
LEGEND
SW
E1 / E2
MAIN SWITCH
TOP ELEMENT - 420W / 60V
BOTTOM ELEMENT - 420W / 60V
DESCRIPTION
E3 / E4
CF
CIRCUIT DIAGRAM
177CNVYOV10A-120V
(M1)
ADJUSTABLE THERMOSTAT BOTTOM ELEMENTS
B2
SC
B1 B2
E1
E2
E3
E4

5.
Before cooking anything in your oven for r follow
1.
2. Ensure the support feet are assembled to the unit before commencing opera .
3. Thoroughly of this manual (page 7).
4. For best results, allow the unit to preheat for 20-25 minutes before use so that the correct
opera temperature can be reached.
BEFORE USING YOUR
USING YOUR VEN
MODELS :
CONVEYOR OVEN
CONVEYOR OVEN
the appliance or within 40 inches above the appliance. The appliance is to be mounted on floors
than 12 inches beyond the equipment on all sides.
Note: Model 177CNVYOV14B is for use on an individual branch circuit only.
177CNVYOV10D - 240V 2800W (10.5” wide belt)
177CNVYOV14B -208V 3500W (14” wide belt)
177CNVYOV14D -240V 3600W (14” wide belt)
177CNVYOV10B - 208V 2800W (10.5” wide belt)
These units have three controls.
1. Conveyor Speed
Determines the length of time the product is in the heating chamber. The slower the speed, the
longer the exposure and the darker the product.
2. Top Heang Element Control
"7" is the hottest setting, "1" is the lowest setting.
3. Boom Heang Element Control
"7" is the hottest setting, "1" is the lowest setting.
The top and boom heang elements are independently controlled and infinitely adjustable.
1. Test the control settings by placing a slice of bread in the oven. It can be placed directly onto the
conveyor belt.
2. Observe the results and adjust settings to the desired temperature and conveyor speed.
Product appearance or color will vary dependent on conveyor speed and temperature setting. Other
i. The moisture content of the product
ii. The sugar content of the product
iii. Initial product temperature
Tesng the unit:
177CNVYOV10A - 120V 1700W (10.5” wide belt)

DIMENSIONS
MODEL : CONVEYOR OVEN
177CNVYOV10B-208V
177CNVYOV10D-240V
177CNVYOV14B-208V
177CNVYOV14D-240V
177CNVYOV10A-120V
6.
929 (36.5”)
452 (17.8”)
850 (33.4)
510 (20”) 14” MODEL
305 (10.5” MODEL)
435 (17”) 10.5” MODEL
491 (19.3”)
380 (14” MODEL)
Model Height Width Depth Belt width
177CNVYOV10A-120V 19.3” 17” 36.5” 10.5”
177CNVYOV10B-208V 19.3” 17” 36.5” 10.5”
177CNVYOV10D-240V 19.3” 17” 36.5” 10.5”
177CNVYOV14B-208V 19.3” 20” 36.5” 14”
177CNVYOV14D-240V 19.3” 20” 36.5” 14”

7.
CAUTION: THIS APPLIANCE SHOULD NOT BE IMMERSED IN WATER.
USE ONLY A DAMP CLOTH OR SPONGE DIPPED IN SOAPY WATER.
DO NOT USE STEEL WOOL AS IT WILL DAMAGE THE BRIGHT STAINLESS
STEEL FINISH.
EXTERIOR & CRUMB TRAY
1. Unplug the power cord from the wall outlet.
2. Wait for the oven to cool.
3. Wipe o the unit with a dry cloth and wait at least half an hour before rec
to the power outlet.
4. Remove the crumb tray from the unit by pulling forward. Dispose of the crumbs
and clean the tray with a damp cloth or sponge dipped in soapy water.
Re ray before reusing the unit.
CONVEYOR BELT
1. Turn o the toaster and allow the unit to cool down.
2. Turn the unit on and set to Sode, adjust the belt to slow speed.
3. Using an abrasive pad, wipe the conveyor belt in a back and forth mo
(ie: side to side) to remove baked-on product.
4. Finally, clean the belt with a damp cloth in the same manner described in number 3.
CLEANING & MAINTENANCE
adjust the belt to slow speed with no heat

EQUIPMENT LIMITED WARRANTY
8.
To Make a Warranty Claim:
• WebstaurantStore.com: Contact [e-mail]. Please have your order number ready.
• The Restaurant Store: If you purchased this unit from your local store, please contact your store directly.
• TheRestaurantStore.com: Online purchases, call 717-392-7261. Please have your order number ready.
HEREBY DISCLAIMS ALL IMPLIED
WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A
PARTICULAR PURPOSE.
This Limited Warranty does not cover:
•
•
•
• Equipment not purchased directly from an authorized dealer
•
•
• Equipment where the serial number plate has been removed or altered.
•
• Defects and damage due to improper maintenance, wear and tear, misuse, abuse, vandalism, or Act of God.
Avantco warrants its equipment to be free from defects in material and workmanship for a period of 1 year. This is the sole
and exclusive warranty made by Avantco covering your Avantco brand equipment. A claim under this warranty must be made
within 1 year from the date of purchaseof the equipment. Only the equipment’s original purchaser may make a claim under
this warranty. Avantco reserves the right to approve ordeny the repairor replacement of any partor repair request. The
warranty is not transferable. Avantco Equipment installed in/on a food truck or trailer will be limited to a period of 30 days
from the original date of purchase.