Avanti WD50 User manual

INSTRUCTION MANUAL
Model Numbers:
WD50 / WDT51
CAUTION:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and
specifications without notice.
Avanti Products
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com

2
Registration Information
Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days
of purchase and receive these
important benefits:
 Confirm your warranty:
Your prompt product registration confirms your right to the protection available under the
terms and conditions of your Avanti warranty.
 Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to
help you refer to this information in the event of an insurance claim such as fire or theft.
 Promote better products:
We value your input. Your responses will help us develop products designed to best meet
your future needs.
----------------------------------------------------------(Detach Here)---------------------------------------------------------
- Avanti Registration Card
__________________________________ _____________________________________
Name Model # Serial #
__________________________________ _____________________________________
Address Date Purchased Store/Dealer Name
__________________________________ ______________________________________
City State Zip Occupation
__________________________________ As Your Primary Residence, Do You:
Area Code Phone Number Own Rent
Did You Purchase An Additional Warranty: Your Age:
Extended Food Loss None under 18 18-25 26-30
Reason For Choosing This Avanti Product: 31-35 36-50 over 50
Please indicate the most important factors Marital Status:
that influenced your decision to purchase Married Single
this product. Is This Product Used In The:
Price Home Business
Product Features How Did You Learn About This Product:
Avanti Reputation Advertising Product Features
Product Quality In Store Demo Personal Demo
Salesperson Recommendation Other______________________________
Friend/Relative Recommendation Comments____________________________
Warranty _____________________________________
Other_______________________ _____________________________________

3
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and maintain
your new water dispenser properly.
Keep it handy to answer your questions.
If you don't understand something or you need
more help, please call:
Avanti Customer Service
800-220-5570
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
Write down the model and serial numbers.
You'll find them on a label located on the back
side of the unit.
Please write these numbers here:
____________________________________
Date of Purchase
____________________________________
Model Number
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your water dispenser.
If you received a damaged water dispenser,
immediately contact the dealer (or builder) that
sold you the water dispenser.
Save time and money. Before you call for
service, check the Problem Solver Guide. It
lists causes of minor operating problems that
you can correct yourself.
IF YOU NEED SERVICE
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further help.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In
most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL 33172

4
PARTS & FEATURES
1. WATER INTAKE 9. STORAGE COMPARTMENT
2. HEATING INDICATOR (RED) 10. POWER CORD
3. POWER INDICATOR (YELLOW) 11. COLD WATER DRAIN
4. COOLING INDICATOR (GREEN) 12. COOLING SWITCH (GREEN)
5. COLD WATER FAUCET (BLUE) 13. HEATING SWITCH (RED)
6. HOT WATER FAUCET/CHILD GUARD (RED) 14. HOT WATER DRAIN
7. REMOVABLE DRIP TRAY 15. CONDENSER COILS
8. DOOR HANDLE 16. ADJUSTABLE FEET

5
Table of Contents
Registration Information Card__________________________________________2
Help Us Help You ____________________________________________________3
Parts and Features ___________________________________________________4
Important Safety Instructions __________________________________________6
Installation Guidelines ________________________________________________6
Before Using Your Water dispenser ___________________________________6
Installation of Your Water dispenser___________________________________6
Operating Your Water dispenser________________________________________7
Care and Maintenance ________________________________________________8
Troubleshooting Guide ______________________________________________9
Service For Your Water dispenser ______________________________________9
Your Avanti Products Warranty________________________________________10
Parts Breakdown____________________________________________________11
Parts List __________________________________________________________12
Wiring Diagram _____________________________________________________13
Spaniah Section _________________________________________________ 14,15

6
Important Safety Instructions


WARNING


To reduce the risk of fire, electrical shock,
or injury when using your appliance, follow
these basic precautions:
•Read all instructions before using the water dispenser.
•Never clean parts with flammable fluids. The fumes can create a fire hazard or
explosion.
•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other water dispenser. The fumes can create a fire hazard or
explosion
•Do not plug unit into receptacle until you ensure the water tank switches are off.
-Save these instructions-
INSTALLATION GUIDELINES:
•Remove the exterior and interior packing.
•Place your appliance on a floor that is strong enough to support the dispenser when it
is fully loaded. The unit is provided with four rubber feet, if it does not sit level on the
floor, use a shim under one of the feet on the base of the dispenser.
•Locate the appliance away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. Extreme cold ambient temperatures may also cause
the appliance not to perform properly.
•Allow 2 inches of space between the water dispenser and the wall, which allows the
proper air circulation to cool the compressor.
•Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not
under any circumstances cut or remove the third (ground) prong from the power cord.
Any questions concerning power and or grounding should be directed toward a
certified electrician or an authorized Avanti Products service center.
•This water dispenser is not recommended for outdoor use.
•Do not locate the dispenser in area where the temperature may fall below freezing
(32º F).
•Keep area around dispenser free of dust and dirt.
•Keep the reserve supply of water bottles away from excessive heat and light.
•Never unplug the water cooler, except for maintenance.
OPERATION INSTRUCTIONS:
Before Using Your Water Dispenser
•Check to be sure the following parts are included:
 Instruction manual
 Accessories order form.
•Before connecting the appliance to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
•The water dispenser is pre-cleaned at the factory but the reservoir and water lines
must be flushed with fresh water before use as follows:
•Keep the unit unplugged.

7
•Fill water tank with tap water full to capacity (almost 3/4 of a gallon). Wait for 5
minutes until water settles.
•Press the hot water faucet until water comes out, then stop.
•Plug the dispenser into the electrical outlet. All three indicator lights on front will
light up at first. We are ready to complete the first cycle. In order to do that, wait
for the hot water indicator light to go off first (approximately 10 minutes), then wait
for the cold water indicator light to go off (another 5 minutes, approximately).
•Unplug the dispenser from the electrical outlet. Proceed to drain the water from
the faucets one at a time until no more water remains.
(Note: To facilitate this operation, use a large container).
•Then, drain any water left in the tanks by opening the drain caps located on the
back, one at a time. First the one marked “hot” until it drains completely. Then the
one marked “cold”.
•Proceed to close both drain caps. Also make sure both faucets are in the off
position.
•Place the 5 gallon bottle of water on the water intake, allow water to stand for
approximately one minute.
•Turn on water faucets to insure water flows from both faucets.
•Plug dispenser into the electrical outlet.
•Now you are ready to use your water dispenser.
NOTE: Your water dispenser has been cleaned and sanitized before leaving the
factory, but in case a taste problem develops, place one tablespoon of
baking soda and add tap water. Fill water tank again and repeat basic
operations previously outlined, except turn the switch market hot “OFF” to
avoid leaving residues in hot water tank.
ATTENTION:
If you do not plan to use the water heating function for more than three days, we
recommend that you turn the hot water switch to “OFF” position.
OPERATING YOUR WATER DISPENSER
 Steps to replace water bottles
 Use a clean cloth to wipe off neck of bottle.
 Remove cap.
 Carefully lift bottle (approx. 40 lbs.) using your legs and not your back. Do not place hands in
opening of bottle while placing in reservoir.
 Insert the water bottle on the water intake over reservoir opening so it settles properly on it.
 Wipe off any water which may have splashed on dispenser top.
 Cold Water Control
Turn the cold-water switch (12) on. The green indicator will be lit and the process begins. When the
water reaches the right temperature the green light goes off automatically.
 Hot Water Control
Turn hot water switch (13) on, the red indicator will be lit and the unit will begin to heat the water.
When the water reaches the right temperature the red light goes off automatically. When the


WARNING


IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF
THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS
SERVICE CENTER.

8
temperature goes down to approx. 80º C (176º F), the red indicator will glow again and another heating
process starts.
To get hot water:
♦Squeeze safety valve on backside of handle and tilt faucet handle down.
♦Continue holding safety valve while pushing down faucet handle as long as water is being
dispensed.
♦When faucet handle is released, make sure to return it to the original position until a click is
heard.
 Cup Dispenser (Optional)
A cup dispenser may be installed by using the mounting holes (covered with plastic caps) located near
the top of the right side panel of the cooler. The cup dispenser comes equipped with a mounting
bracket and screws and may be ordered by completing the enclosed order form provided with your
instruction manual.
CARE AND MAINTENANCE
•Wash the inside of the reservoir with a warm water and baking soda solution. The solution should
be about 2 tablespoons of baking soda to a quart of water.
•The drip tray and water faucets should be cleaned with mild detergent and warm water.
•At regular intervals or once a month inspect the coils located across the back of the dispenser.
Vacuum accumulation of dust or clean it with a hard brush.
TAKING DISPENSER OUT OF SERVICE
•If the water dispenser will not be used for a long period of time, unplug the power cord from the
wall outlet.
•Drain the water through the faucets.
•Turn the switch market hot to the “OFF” position.
•Drain the water from the tanks by removing the plugs from the back of the dispenser.
 Unit should not be transported on the sides. Place it upright if possible and cover if with a blanket.
WARNING—THE WATER COMING OUT OF THE BACK SIDE MARKED “HOT” MAY BE SCOLDING.
NOTE:
THE HOT WATER FAUCET HAS A CHILD-SAFETY GUARD ATTACHMENT.

9
PROBLEMS WITH YOUR WATER DISPENSER?
You can solve many common water dispenser problems easily, saving you the cost of a possible
service call. Try the suggestions outlined below to see if you can solve the problem before calling the
servicer.
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE
Water dispenser does not operate. Not plugged in.
The circuit breaker tripped or blown fuse.
Water cooler is not cold enough. Check to be sure the cold switch on the back is
ON.
The water dispenser does not have the correct
clearances.
Water dispenser hot water is not hot enough. Check to be sure the hot switch on the back is
ON.
Compressor turns on and off frequently. The room temperature is hotter than normal.
The temperature control is not set correctly.
The water dispenser does not have the correct
clearances.
Vibrations. Check to assure that the water dispenser is level.
The water dispenser seems to make too much
noise. The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
water dispenser.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
The water dispenser is not level.
SERVICE FOR YOUR WATER DISPENSER
We are proud of our customer service organization and the network of professional service
technicians that provide service on your Avanti appliances. With the purchase of your Avanti
appliance, you can have the confidence that if you ever need additional information or assistance, the
Avanti Products Customer Service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323-5029 Whatever your questions are about our products, help is available.
Part Orders
800-220-5570 You may order parts and accessories that will be
delivered directly to your home.
You may order these items by personal check,
money order, Master Card, or Visa.
In-Home Repair Service
800-220-5570 An Avanti Products authorized service center will provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your appliance inside and out.

10
YOUR Avanti Products WARRANTY Staple your sales receipt here. Proof of
original purchase date is needed to obtain
service under warranty.
WHAT IS COVERED
LIMITED ONE-YEAR
WARRANTY
For one year from the date of
purchase by the original owner, Avanti
Products will, at its option, repair or
replace any part of the appliance
which proves to be defective in
material or workmanship under normal
use. During this period Avanti
Products will provide all parts and
labor necessary to correct such
defects free of charge, so long as the
appliance has been installed and
operated in accordance with the
written instructions in this manual. In
rental or commercial use, the warranty
period is 90 days. All Avanti
Appliances of 3.5 cubic foot capacity
or less must be brought/sent to the
appliance service shop for repair.
•Incidental or consequential damages.
•Parts and labor costs for the following will
not be considered as warranty:
•Inner door panels, door shelves, door rails,
and/or door supports.
•Light bulbs and/or plastic housing.
•Plastic cabinet liners.
•Punctured evaporator that voids the
warranty on the complete sealed system.
•Replacement of house fuses or resetting
circuit breakers.
LIMITED SECOND THROUGH
FIFTH YEAR WARRANTY
For the second through the fifth year from date
of original purchase, Avanti Products will
provide a replacement compressor free of
charge due to a failure. You are responsible for
the service labor and freight charges. In rental
or commercial use, the limited compressor
warranty is one year and nine months. Cost to
move the appliance to the servicers’ shop and
back to the user's home, as may be required,
are the user's responsibility.
•Repairs performed by unauthorized
servicers.
•Service calls that do not involve defects in
material or workmanship such as
customer education, door reversal, or
proper installation.
•Service calls that are related to external
problems, such as abuse, misuse,
inadequate electrical power, accidents,
fire, floods, or acts of God.
•Failure of the product if it is used for other
than its intended purpose.
•This warranty does not apply outside the
continental U.S.A.
WHAT IS NOT COVERED

11
PARTS BREAKDOWN

12
PARTS LIST
1 TOP COVER 1
2 COLD WATER INLET TUBE 1
3 LEFT SIDE PANEL 1
4 HOT WATER INLET TUBE 1
5 88°C THERMOSTAT UPPER 1
5A 95°C THERMOSTAT LOWER 1
6 HEATING SWITCH 1
6A COOLING SWITCH 1
7 SWITCH PANEL 1
8 HOT WATER TANK THERMO-INSULATION FOAM 1
9 UPPER SUPPORT BRACKET 1
10 COOLING THERMOSTAT HOLE CAP 1
11 UPPER SUPPORT PLATE 1
12 SUPPORT PLATE 1
13 DRYER FILTER 1
14 COOLING THERMOSTAT 1
15 SEALING CUSHION 2
16 WATER DRAIN VALVE CAP (HOT) 1
16A WATER DRAIN VALVE CAP (COLD)` 1
17 WATER DRAIN VALVE (HOT) 1
17A WATER DRAIN VALVE (COLD) 1
18 BACK COVER PLATE 1
19 RIGHT SIDE PANEL 1
20 CONDENSER 1
21 POWER SUPPLY CORD 1
22 WIRING JUNCTION BOX 1
22A WIRING JUNCTION BOX COVER 1
23 POWER SUPPLY CORD CLIP 1
24 COMPRESSOR BASE 1
25 STORAGE COMPARTMENT CABINET 1
26 UNIT LEGS 4
27 COMPRESSOR 1
28 LOWER HINGE SUPPORT 1
29 UPPER HINGE (LARGE AXIS) 1
29A LOWER HINGE (AXIS) 1
30 STORAGE COMPARTMENT LOWER PANEL 1
31 STORAGE DOOR LINER 1
32 DOOR GLASS 1
33 DOOR SEALING GASKET 1
34 STORAGE COMPARTMENT UPPER PANEL 1
35 STORAGE COMPARTMENT DOOR 1
36 WATER RECEPTACLE 1
37 WATER RECEPTACLE COVER 1
38 COLD WATER FAUCET 1
38A HOT WATER FAUCET 1
39 FRONT PANEL 1
40 PC BOARD BOX 1
41 LED INDICATOR PC BOARD 1
42 COLD WATER THERMO-INSULATION FOAM 1
43 COLD WATER TANK 1
44 COLD WATER OUTLET TUBE 1
44A HOT WATER OUTLET TUBE 1
45 HOT WATER TANK 1

13
WIRING DIAGRAM
PARA OBTENER AGUA CALIENTE:
♦APRIETE EL BOTON DE SEGURIDAD EN LA PARTE TRASERA DEL AGARRADOR Y
MUEVA EL AGARRADOR DEL GRIFO HACIA ABAJO.
♦AGUANTE EL BOTON CUANDO EMPUJE EL AGARRADOR HACIA ABAJO MIENTRAS
SALE EL AGUA.
♦CUANDO SUELTE EL AGARRADOR, ASEGURESE DE RETORNARLO A LA POSICION
ORIGINAL HASTA QUE OIGA UN RUIDO.
E
N
Yellow
Green
Compressor
Cooling thermostat
Green
Overload Protector
Red
Red
95°C
L
Heater88°C
AVISO:
ESTE GRIFO DE AGUA CALIENTE TIENE UN ADAPTADOR DE SEGURIDAD PARA
NINOS/NINAS.

14
PASOS RECOMENDADOS PARACAMBIAR EL BOTELLON
 QUITE EL BOTELLON VACIO.
 LIMPIE EL CUELLO DEL BOTELLON NUEVO CON UN TRAPO LIMPIO.
 CUIDADOSAMENTE LEVANTE EL BOTELLON USANDO LAS PIERNAS Y NO LA ESPALDA.
 TOME EL BOTELLON POR LOS LADOS Y DIRIJA EL CUELLO DEL MISMO HACIA LA
APERTURA DEL TANQUE.
 VOLTEE EL BOTELLON COMO SI FUERA A SOLTAR AGUA Y DIRIJALO HACIA LA
APERTURA DEL TANQUE HASTA QUE SE COLOQUE EN LA POSICION CORRECTA.
DIRECCIONES BASICAS DE OPERACION:
 COLOQUE EL ENFRIADOR DE PIE CORRECTAMENTE POR UN PERIODO DE 2 HORAS
ANTES DE ENCHUFAR LA UNIDAD A LA PARED.
 COLOQUE EL ENFRIADOR EN UN AREA BIEN VENTILADA Y DEJE UN ESPACIO DE UN
POCO MAS DE 2 PULGADAS ENTRE LA UNIDAD Y LA PARED.
 ESCOJA UN LUGAR CON EL PISO NIVELADO.
 NO COLOQUE EL ENFRIADOR DONDE LA TEMPERATURA AMBIENTAL PUEDA BAJAR DE
32°F (0°C).
ANTES DE PONERLO EN SERVICIO
EL ENFRIADOR SALE LIMPIO DE LA FABRICA PERO AUN SE TIENEN QUE LIMPIAR Y
ESTERILIZAR LOS CONDUCTOS DEL TANQUE Y LOS GRIFOS DE ACUERDO A LOS
SIGUIENTES PASOS:
 LLENE EL TANQUE DE AGUA (HASTA EL TOPE) CON AGUA DE LA PILA.
 DEJE NIVELAR EL AGUA POR 5 MINUTOS.
 ABRA LA LLAVE DE AGUA CALIENTE HASTA QUE SALGA AGUA Y CIERRELA
INMEDIATEMENTE.
 ENCHUFE LA UNIDAD A LA PARED. LOS TRES INDICADORES DE LUZ SE ALUMBRARAN.
ESPERE HASTA QUE EL INDICADOR DE AGUA CALIENTE SE APAGUE (APROX. 10
MINUTOS).
 ENTONCES ESPERE HASTA QUE EL INDICADOR DE AGUA FRIA SE APAGUE (APROX. 5
MINUTOS).
 DESCONECTE LA UNIDAD DE LA PARED.
 EMPIEZE A DRENAR LAS LLAVES UNA A LA VEZ HASTA QUE SALGA EL ULTIMO CHORRO
DE AGUA.
 EN LA PARTE TRASERA DE LA UNIDAD ENCONTRARA DOS TAPAS PLASTICAS.
PRIMERAMENTE GIRE HACIA LA IZQUIERDA LA MARCADA CALIENTE (HOT) HASTA QUE
SALGA EL ULTIMO CHORRO. ENTONCES REPITA LA OPERACION CON LA MARCADA
FRIA (COLD).
 CUANDO NO SALGA MAS AGUA DE AMBAS APERTURAS, CIERRE LAS TAPAS PLASTICAS.
 TOME EL BOTELLON DE AGUA E INVIERTA EL BOTELLON EN EL TANQUE.
 ENCHUFE LA UNIDAD. AHORA USTED ESTA LISTO PARA USAR SU ENFRIADOR.
CONTROLES DE OPERACION
 CONTROL DE AGUA FRIA:
ABRA LA LLAVE DE AGUA FRIA (12). EL INDICADOR DE LUZ VERDE SE ENCENDERA Y
EL PROCESO DE ENFRIAMIENTO COMIENZA. CUANDO LA TEMPERATURA ALCANZA
APPROXIMADAMENTE 5-7°C LA LUZ VERDE SE APAGARA AUTOMATICAMENTE.
 CONTROL DE AGUA CALIENTE:
ABRA LA LLAVE DE AGUA CALIENTE (13). EL INDICADOR DE LUZ ROJA SE
ENCENDERA Y EL PROCESO DE CALENTAMIENTO DEL AGUA COMIENZA.
CUANDO LA TEMPERATURA ALCANZA APROXIMADAMENTE 80°C LA LUZ ROJA SE
APAGARA AUTOMATICAMENTE Y OTRO CICLO DE CALENTAMIENTO EMPEZARA.

15
MANTENIMIENTO
 AINTERVALOS REGULARES (UNA VEZ AL MES), INSPECCIONE EL CONDENSADOR O
REJILLA DE ALAMBRE LOCALIZADA EN LA PARTE TRASERA DE LA UNIDAD.
 ANTES DE EFECTUAR LA LIMPIEZA, DESENCHUFE EL ENFRIADOR. USE UNA
ASPIRADORA PARAQUITAR EL POLVO O UN CEPILLO DURO.
 PARA LIMPIEZA DE PARTES DE PLASTICO SE REQUIERE JABON LIQUIDO YAGUA TIBIA.
NO USE LIMPIADORES ABRASIVOS EN LA SUPERFICIE SUPERIOR Y LA BANDEJA DE
ESCURRIMIENTO.
PARA COLOCAR EL ENFRIADOR FUERA DE SERVICIO
 DESENCHUFE LAUNIDAD.
 QUITE EL BOTELLON DE AGUA.
 COLOQUE EL INTERRUPTOR MARCADO CALIENTE (EN LA PARTE TRASERA) EN LA
POSICION “OFF”.
 DRENE ELAGUAABRIENDO LAS LLAVES.
 DRENEAMBAS APERTURAS EN LA PARTE TRASERA QUITANDO LOS TAPONES.
 EL ENFRIADOR DEBE TRANSPORTARSE PARADO. CUBRALO CON UNA FRAZADA PARA
EVITAR QUE SE RAYE.
CENTRO DE SERVICIOS
LA MAYORIA DE LOS PROBLEMAS SE RESUELVEN CON UNA SIMPLE LLAMADA
TELEFONICA A NUESTRO NUMERO SIN CARGO.
1-800-220-5570
ANTES DE DEVOLVER EL PRODUCTO O PARA OBTENER LA DIRECCION Y NUMERO DE
TELEFONO DEL CENTRO DE SERVICIO MAS CERCANO LLAME AL SIGUIENTE NUMERO.
1-800-220-5570
POSIBLES PROBLEMAS
DERRAME DE AGUA POR FUERA DEL
ENFRIADOR LA BOTELLA ESTA PERFORADA - REEMPLACELA
EL AGUA NO ESTA SUFICIENTEMENTE
FRIA. SU TEMPERATURA DEBERIA SER DE 5°A
7°C CON UNA TEMPERATURA AMBIENTE
DE 20°C. SI NO ES ASI, LLAME AL CENTRO
DE SERVICIO, PORQUE EL TERMOSTATO
PUEDE ESTAR DEFECTUOSO.
EL AGUA NO ESTA SUFICIENTE CALIENTE SU TEMPERATURA DEBERIA SER DE 80°A
90°C CON UNA TEMPERATURA AMBIENTE
DE 20°C. SI NO ES ASI, LLAME AL CENTRO
DE SERVICIO, PORQUE EL TERMOSTATO
PUEDE ESTAR DEFECTUOSO.
EL ENFRIADOR NO ENFRIA O CALIENTA EL
AGUA VERIFIQUE LOS CIRCUITOS, FUSIBLES O DISYUNTORES.
PRINTED IN CHINA