Avantree AS90C Operating manual

㕌φ=3.4*$6&9
ᶆ䍞φJҜ㓮
仒㢨φ഑㢨দ࡭
ተሮφ[PP
Make sure that the Opera (transmitter and headphones) have connected - The LED
indicator on the headphone will turn SOLID BLUE. Follow the below steps to add the
2nd headphone:
Add a 2 Pair of Headphones to Opera
nd
1. Enter the transmitter (dock) into PAIRING MODE manually – Slide & hold the Mode
switch at “PAIR” position until the Indicator starts ashing RED & BLUE.
2. Enter the 2nd pair of AS90C headphones into Bluetooth PAIRING MODE- Slide the
power switch on the Headphone to “ON” to turn it on. Next, slide & hold the power
switch at “PAIR” until the Indicator starts ashing RED & BLUE; you’ll hear “Pairing”
in the headphones.
Keep the devices close to each other and wait. Once connected, the LED indicators
on the transmitter and the two headphones will all turn SOLID BLUE.
Use Guide
Avantree AS90C
Model: BTHS-AS90-C
Z-PKQG-AS90C-V0
Any questions? Contact:
[email protected]
Self-service Support:
•More FAQs on support.avantree.com
• 100+ Step by step video Guide – youtube.com/avantree/playlists
Telephone Support (Mon-Fri):
• USA / CANADA [phone] (EN, PST 9am-5pm)
• EU / Asia telephone No. refer to http: //www.avantree.com/contact-us
(Response Time: 1 working day)
3. RECONNECT: For your next use, please turn the original Opera Headphone on rst;
once it’s connected, you may turn on the second pair of AS90C headphones and
click the button once to reconnect.
For more detailed instructions, please visit support.avantree.com.