Avantree AH6B User manual

User Manual
Stereo Wireless Headphones
AH6B
Product Overview ·····································································································································································1
Basic Operation··········································································································································································1
Status of LED indicators ··························································································································································2
Connect to a Bluetooth device·············································································································································2
Connect to two Bluetooth devices simultaneously······································································································3
Reconnect to Bluetooth device············································································································································3
Connect to PC / Laptop···························································································································································3
Using as a wired headphone·················································································································································4
Charging·······················································································································································································4
Reset·······························································································································································································4
Troubleshooting ········································································································································································4

1
Product Overview
AUX
MUTE
Basic Operation
Button Function Operation
Power
Switch
Power ON Slide the power switch towards middle you’ll
hear “Welcome to Avantree”
Pairing
Slide the power switch to left and hold for 3
seconds. You’ll hear “Pairing”and the LED indicator
blinks RED and BLUE alternately.
Power OFF Slide the power switch to right you’ll hear
“Good Bye”
Answer /
End a call Press once
Reject a call Hold 1s whilst a call coming
Activate smart
voice assistant Press twice
Micropahone
Mute ON/OFF
While on an active call, Press and hold 1s to
activate/close Microphone Mute function. You’ll hear
“Microphone Mute ON/OFF”
Track backward Press once
Play/Pause Press once
Track forward Press once

2
Volume
Wheel
Volume up Rotate the volume wheel forward to volume up
Volume down Rotate the volume wheel backward to volume
down
MUTE
Microphone
Mute ON/OFF
While on an active call with boom mic, Press and hold
MUTE
1s to activate/close Microphone Mute function.
You’ll hear“Microphone Mute ON/OFF”
&
Voice Prompt
ON/OFF Hold & till you hear “Voice Prompt ON/OFF”
Note: Functionality varies by application.
Status of LED indicators
Working Status LED indicator
Paring Mode Blinks BLUE & RED alternately
Reconnecting Blinks BLUE once every 1 second
Disconnected Blinks BLUE once every 10 seconds
Microphone Mute ON Remains RED
Connected Blinks BLUE once every 5 seconds
Low battery Blinks RED three times every 10 seconds
Connect to a Bluetooth device
Enter Headphones into Pairing Mode:
Slide the power switch to left and hold for 3 seconds. You’ll hear “Pairing” and the LED indicator blinks
RED and BLUE alternately.
Pair to mobile device
• Set the headphones into Pairing Mode as above.
• Activate Bluetooth on your phone and set it to search for new devices.
• Select “Avantree AH6B”, once successfully paired you’ll hear“connected”.

3
Connect to two Bluetooth devices simultaneously
To add another cell phone
• Connect with the FIRST phone as above, then turn o the headphones.
• Connect headphones with SECOND phone as above.
• Tap and select “Avantree AH6B”on the FIRST phone. Now, Avantree AH6B
connected with TWO phones simultaneously.
Reconnect to Bluetooth device
Reconnection
Normally, when the next time you turn on Avantree AH6B, it will automatically reconnect the last paired device.
Alternatively, Slide the power switch to left once, then release to enter into its Reconnection Mode.
Connect to PC / Laptop
• Set the headphones into Pairing Mode as above.
• Activate Bluetooth function on your PC/Laptop, search & select “Avantree AH6B”
to pair and connect.
• For music stream, please set “Avantree AH6B” as the Playback Default Device/
Out put device in Sound Setting page.
• For Skype call, please set “Avantree AH6B Hands-free Headset” as microphone
and speaker device in Audio Settings.

4
Using as a wired headphone
Use the supplied 3.5mm audio cable to connect to a non-Bluetooth audio device, or if the headphone battery is
depleted.
Note: The headphone will power o automatically once you plug in the 3.5mm audio cable.
Charging
When the LED ashes RED 3 times per 10 seconds or you hear the voice prompts “Low battery please turn o
and charge”, you should fully recharge the device for about 2 hours. Charged with the micro USB cable - The LED
indicator on the headphones will remain RED while charging and turn o when charging is complete.
Reset
Clear pairing history
If you have issues with the audio stream skipping or cutting out when using Avantree AH6B, please try to clear
pairing history as following:
Firstly, turn on the headset (Non-calling Status), then Press and Hold BOTH &
5 seconds till the LED blinks PINK for 2 seconds, then the headphones enter into PAIRING MODE automatically.
Troubleshooting
No sound with PC?
• Set Avantree AH6B as the default device or output device on the PC.
• When using AH6B to make VOIP calls through apps, please set “AH6B
Hands-Free”as Microphone and Speakers device.

5
No sound with Bluetooth transmitter to watching TV?
• Ensure Bluetooth transmitter and headphones are connected properly.
• Check to ensure audio source is functioning properly
- AUX & RCA output on TV – test with wired headphones
- OPT output on TV – Set audio format to “PCM/LPCM” or turn o Dolby/DTS
• Change your TV audio out setting to External speakers / Headset.
Headphones do not pair with Bluetooth device?
• Ensure AH6B is in Pairing mode – LED will ash BLUE and RED alternately.
• For Bluetooth transmitter, ensure the transmitter is in Pairing mode – refer to its user manual.
• For Smart phone, tablet and PC
- Turn the Bluetooth o and then on again.
- Delete “Avantree AH6B headphones” from your devices Bluetooth list and then try to pair again.
• Clear the headphones pairing history and pair again.