AVENN 005-TH-RRS64 User manual

Item# 005-TH-RRS64
Read carefully and understand all ASSEMBLY AND/OR OPERATION
INSTRUCTION before using the product. Failure to follow the safety rules
and other basic safety precautions may result in serious personal injury.
⚠WARNING! CAUTION!
Skinny Type Roof Rack Cargo Carrier
OWNER’S MANUAL

owner’s manual
2
Thank you for purchasing our product.
This manual covers operation and maintenance information about the product. Read carefully and
understand all instruction before using the product.
All information in this publication is based on the latest product information available at the time of
approval for printing.
We reserve the right to make changes at any time without notice and without any obligation.
Table of Contents
03
03
04
05
Warning and Precaution --------------------------------------------------------------
Product Specication ------------------------------------------------------------------
Package Content ------------------------------------------------------------------------
Assembly Instruction -------------------------------------------------------------------

owner’s manual
3
READ ALL INSTRUCTION BEFORE USE
• Inspect the product before use. Do not use if damaged or with missing parts.
• Do not use the product for anything other than intended use.
• Do not exceed the maximum load capacity.
• Always distribute the weight on the rack evenly.
• Always secure the loads on the rack and check frequently.
• Make sure all knobs and screws are tighten before use.
• Do not carry cargo that is larger than the rack.
• Do not carry any ammable or combustible items on the rack.
• Use the roof rack according to your state, or local vehicle regulation.
SAVE THESE INSTRUCTIONS
SPECIFICATION
Model Number 005-TH-RRS64
Overall Dimension 64” x 23” x 6”
Max. Load Capacity 150 lb
U-bolt Spacing 4.65” wide x 1.375”

owner’s manual
4
PACKAGE CONTENT
Washer
8x 8x 4x
4x 4x 4x
4x10x4x
1x 1x 1x
1x 1x2x 2x
2x
U-Bolts
16 mm ScrewsNuts 35 mm Screws Side Fairing
Rear Basket Front BasketBasket Extension
Front Fairing Allen WrenchTop Clip Bottom Clip
Bracket Top Plate Foam Padding
Wing Nut Spacer

owner’s manual
5
1
• Slide the basket assembly together.
ASSEMBLY INSTRUCTION

owner’s manual
6
• Secure the assembly using the provided screws through the side fairing to the basket frame.
2

owner’s manual
7
3
Washer
Top Clip (smaller)
Bottom Clip (larger)
Long Screws
Short Screws
Spacer
• Assemble the front fairing to the basket.
• Install the clip on the rack. The smaller clips t on the top and the larger clips t on the bottom.
• Secure the fairing by using 16mm screws through the top clip and the longer 35mm screws
through the bottom clips.

owner’s manual
8
ASSEMBLY INSTRUCTION (BASKET INSTALLATION)
4
• The rack can only be installed on vehicles with mounting rail and cross bar.
NOTE: Check with your vehicle dealership for compatible mounting rail if necessary.
• Position the saddle away from the center of the rack for even weight distribution. Align them to the
crossbar on your vehicle.
NOTE: Relocate the crossbar on the mounting rail if necessary. The 2 crossbars need to be at least
15” apart from each other.
• Clamp and secure the rack on the crossbar by tightening the wing nuts on the saddle.