AVer CAM130 User manual

CAM130 Content Camera
Quick Start Guide|安裝指南
安装指南|取扱説明書
빠른 가이드|Mode d'emploi
Manual de instrucciones|Краткое
руководство

English......................................................................................................1
繁體中文 .................................................................................................13
简体中文 .................................................................................................24
日本語.....................................................................................................35
한국어.....................................................................................................46
Français..................................................................................................58
Español...................................................................................................70
Pусский ..................................................................................................82

English-1
Content Camera Bundle Kit Package
CAM130 Content Camera
Unit & Lens Cover
Power Adapter and
Plug*
Tripod Screw
USB 3.1 Type-C to
Type-A Cable (1.8m)
QR Code Card
Whiteboard Mount
USB3.1
Extender 10m**
Remote Control
* The power adapter will vary depending on the standard power outlet of the country where it is sold.
* Power adapter will be required to support fill light function only when connecting CAM130 Content
Camera to PC USB 2.0 port.
** This extender only supports USB3.0 port of PC. Make sure your PC or MTR has USB3.0 port.
Otherwise, please purchase USB2.0 extender from the market, such as the Aten UE2120. Please
check our compatibility list before purchasing.
https://www.aver.com/Knowledge-Learns/conferencing-collaboration/compatibility-list
Optional Accessories
USB 3.1 Extender
10m/20m/30m
USB 2.0 Type-C to
Type-A Cable (5m)*

English-2
Overview
126
4 5 8 10
9113 7
2
12
13
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Fill Light*
Microphones**
Color Sensor
Lens
Lens Cover
LED Indicator
Light Level Butto
(8)
(9)
(10)
(11)
(12)
(13)
Kensington Lock
USB 3.1 Type-C Port
DC 5V Power Jack
Color Temperature Button
Camera Clip
Tripod Screw Hole
* The fill light function is set “Manual mode” as default. Please use PTZApp 2 to change the settings.
** The built-in microphone of CAM130 Content Camera is disabled as default. Please use PTZApp 2 to
change the settings.
LED Indicator
Power on: Solid red
Start-up: Solid red
Power cable connected but USB cable unplugged: Solid orange
Video mute: Solid white
Video on: Solid blue

English-3
Control Fill Light via Device Buttons
Hold either temperature button or light level button for 2~3 sec. to switch on/off fill light
function.
Hold both temperature button and light level button together for 2~3 sec. to switch
between auto/manual light adjustment.The message below will show on the image screen.
Whether under auto or manual light adjustment mode, user can press the button to slightly
adjust color temperature or press the button to adjust light level.
[Note] The light brightness level in manual mode is much higher than auto mode. There are 12
levels for adjustment.
The camera can memorize the last setting or back to default. Please do advanced settings of the fill
light function via PTZApp 2.
The color temperature ranges from 2700k to 5700k.
[Notes]
1. By default, fill light function is set as “Manual”. You can use PTZApp 2 to change the setting to
“Auto” to automatically adjust the lighting level based on actual environment when video
streaming is on.
2. Users can do advanced lighting behavior setting under manual light adjustment mode viaAVer
PTZApp 2.
3. The fill light brightness level is much higher while connecting the camera to power with power
adapter.
4. If you want to unplug the power adapter while USB video streaming is on, please turn off fill light
first to avoid system shut down.
5. Power adapter will be required to support fill light function only when connecting CAM130
Content Camera to PC USB 2.0 port.
Control Fill Light via Remote Control
Long press either or button for 1~2 sec. to turn on/off the fill light function.
[Note] When fill light is on, press or button to increase/decrease light level.

English-4
Remote Control
SmartFrame ( ): One-click automatic FOV adjustment to fit all participants in screen. Press
and hold the button for 1~2 sec to switch from manually, auto framing and preset framing mode or
Off.
Enter ( ): Press it to show the currentAI function on screen such asAuto Framing.
Load Preset Hotkey ( ): Press it to move to preset position as user has set in sequence.
Number 0~9: Long press the number button to set preset point. One-click the number key to load
preset point.
FOV: Press then to change field of view between 90 degree and 120 degree.
WDR: Press then to enable/disable the WDR function.
Microphone: Press then to enable/disable microphone function.
Long press either or button for 1~2 sec to turn on/off the fill light function.
When fill light is off, press / button to increase/decrease image brightness.
When fill light is on, press / button to increase/decrease light level.

English-5
Installation
The CAM130 Content Camera can be mounted onto the wall or ceiling using the Whiteboard Mount
(refer to Bundle Kit Package).
Wall Mount Mode
Ceiling Mount Mode
Make sure that the camera has
captured the frames of whiteboard
completely.
Rotate to loose/tighten the
rod for length adjustment
Cable box to accommodate
USB extender
Adjustable camera angle
Whiteboard
At least 1M
Equipments:
1. CAM130 Content Camera.
2. USB3.1 Type-C to Type-A cable (1.8m is included in the CAM130 Content Camera package).
3. AVer whiteboard mount kits (Rod, Box and two M4x5mm screws).
4. AVer USB3.1 extender (10m is included in CAM130 Content Camera bundle kit. 20m and 30m are
optional).
5. MTR system (support USB3.0 USB port).

English-6
1. Mount the bottom case of the Box to the wall 3cm above the center line of whiteboard/IFP space (or
mount It to the ceiling).
[Note] Please prepare three screws before mounting (not included in the package). The diameter
of the three screw holes on the bottom case is Ø 6mm.
3 - Ø 6mm
205mm
60mm
2. Insert the cable (Type A side) into the rod hole till the end of the rod. Leave 20cm of the cable for
connecting to the camera.
Type C Type A
20cm

English-7
3. Align the top case with the bottom case of the Box, insert the rod into the hole of both cases, and
then rotate the rod to get it tightened with the box.
Wall Wall
4. Connect the USB Type A side to the female connector of USB3.1 Extender Cable and house the
joins inside the Box.
Wall Wall
USB3.1 Extender Cable
Type A
5. Secure the top case to the bottom case with the supplied two M4x5mm screws.
Wall

English-8
6. Install the camera to another end of the rod and turn the wheel to lock it.
7. Connect USB Type C to the Type C port located on the back of camera.
8. Rotate the rotating ring on the rod to adjust the rod length and rotate it again in the opposite
direction to lock.
9. Connect USB3.1 extender to MTR USB3.0 port. USB extender only supports USB3.0 port. Power
on MTR and set it up in Teams room. Make sure there is USB3.0 port in MTR since USB extender
doesn’t support USB2.0 port of PC/MTR. If using USB2.0 USB extender and want to use fill-light
function, please connect power adapter to camera.

English-9
10. Connect HDMI out of MTR system to TV monitor and use preview function to see the Content
Camera image.Adjust the camera clip to ensure the camera capture the frames of the whiteboard.
11. The rod of whiteboard mount can be adjusted in length from 80cm to 120cm as required.
Rod Length vs. whiteboard/IFP size
Whiteboard Size (L)
Rod Length
Mounting Method
<1.2 meters
80cm
Mount 3cm above the center of the board
1.2~1.7 meters
100cm
1.8~2 meters
120cm
Any Size
80~120cm
Install the mount on the ceiling and the location is
in front of central top of the board. It is suggested
to place the camera at least 1m away from the
board to ensure complete capturing of the board
frames.

English-10
Making a Video Call in MTR
For a fluid meeting room experience, we recommend setting up two cameras. One is the front room
camera used to capture all participants (such as VB130 in huddle space or VC520Pro2 in mid to large
room). The other is CAM130 Content Camera to capture whiteboard content.
Connect CAM130 Content Camera andAVer conference camera devices to MTR system to start an
efficient collaborative meeting. Please refer to user’s manual for more details.
[Notes]
The CAM130 Content Camera is a plug-and-play camera. The system requires no special drivers, but
we do recommend installing the PTZApp 2 for a better user experience.The following functions are set
Off as default. Please use PTZApp 2 to enable them:
1. Whiteboard keystone function
2. Microphone function
Install PTZApp 2
Please go to https://www.aver.com/download-center/ (Global & European Headquarters) or
https://www.averusa.com/business/support/ (USA) to download the PTZApp 2. After downloading,
double-click on the file and follow the on-screen instructions to complete the installation.
After installing the PTZApp 2, double-click on the PTZApp 2 icon to run the application.
[Note] PTZApp 2 runs on web browser. It doesn’t support IE browser. It is suggested to set up your
browser to Chrome as default.
Use PTZApp 2
You can use the PTZApp 2 to pan, tilt and zoom the camera in/out and enable/disable the true WDR,
brightness and sharpness features. Please refer to the user’s manual for details.

English-11
FEDERAL COMMUNICATIONS COMMISSION
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radiofrequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Warning:
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la
classe A est conforme à la norme NMB-003 du Canada.
Caution:
Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According
to the Instructions.
COPYRIGHT
© 2021 AVer Information Inc. All rights reserved.
MORE HELP
For FAQs, technical support, software and user manual download, please visit:
Headquarters
Download Center: https://www.aver.com/download-center
Technical Support: https://www.aver.com/technical-support
USA Branch office
Download Center: https://www.averusa.com/business/support/
Technical Support: https://averusa.force.com/support/s/contactsupport
Europe Branch office
Download Center: https://www.avereurope.com/download-center
Technical Support: https://www.avereurope.com/technical-support

English-12
Contact Information
Headquarters
AVer Information Inc.
https://www.aver.com
8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City 23673, Taiwan
Tel: [phone]
USA Branch office
AVer Information Inc., Americas
https://www.averusa.com
668 Mission Ct., Fremont, CA94539, USA
Tel: [phone]
Toll-free: [phone]
Technical support: [e-mail]
Europe Branch office
AVer Information Europe B.V.
https://www.avereurope.com
Westblaak 134, 3012 KM, Rotterdam, The Netherlands
Tel: [phone]
Technical support: [e-mail]
Japan Branch Office
アバー・インフォメーション株式会社
https://jp.aver.com
〒160-0023 日本東京都新宿区西新宿 3-2-26 立花新宿ビル 7 階
Tel: [phone]
テクニカル・サポート: [e-mail]
Vietnam Branch Office
Công ty TNHHAVer Information (Việt Nam)
Tầng 5, 596 Nguyễn Đình Chiểu, P.3, Quận 3, Thành phốHồChíMinh 700000, Việt Nam
Tel: [phone]

繁體中文-13
(內容相機組合包) 包裝內容物
CAM130 內容攝影機裝
置及鏡頭蓋
電源變壓器及插頭*
三腳架螺絲
USB 3.1 Type-C 轉
Type-A 連接線(1.8 米)
QR 碼卡
白板支架
USB3.1 延長線
10m**
遙控器
*電源變壓器會因銷售國家的標準電源插座而有所不同。
*當連接 CAM130 內容攝影機至電腦 USB 2.0 埠時，需要插上電源變壓器支援補光燈功能。
** 此延長線僅支援電腦 USB3.0 埠。請確認您的電腦或 MTR 具有 USB3.0 埠，否則，請購買市面上販售
的USB2.0 延長線，例如 Aten UE2120。購買前請查看圓展提供的相容列表。
https://www.aver.com/Knowledge-Learns/conferencing-collaboration/compatibility-list
選購配件
USB 3.1 延長線
10 米/20 米/30 米
USB 2.0 Type-C轉Type-A
連接線(5 米)

繁體中文-14
產品介紹
126
4 5 8 10
9113 7
2
12
13
(1)
(2)
(3)
(4)
(5)
(6)
(7)
補光燈
麥克風
色溫感應器
鏡頭
鏡頭蓋
LED 指示燈
照度鍵
(8)
(9)
(10)
(11)
(12)
(13)
Kensington 防盜孔
USB 3.1 Type-C 埠
DC 5 V 電源插孔
色溫鍵
電視螢幕夾
三腳架孔
LED 指示燈
開啟電源：恆亮紅燈
啟動：恆亮紅燈
連接電源線但是將 USB 線拔除：恆亮橘燈
關閉影像串流：恆亮白燈
開啟影像串流：恆亮藍燈

繁體中文-15
透過裝置按鍵控制補光燈
按住色溫鍵 或照度鍵 2到3秒鐘以打開/關閉補光燈功能。
同時按住色溫鍵 和照度鍵 2到3秒鐘可切換自動/手動調光。下方訊息將顯示在影像視
窗。
無論在自動/手動調光模式下，皆可按住色溫鍵 以微調色溫；或按住照度鍵 以微調照度。
[注意] 手動模式下的光線明亮度較自動模式時高出許多，共有 12 個等級可調整。
此攝影機可記錄最後一次的設定值或回復出廠預設值，請透過 PTZApp 2 進一步調整捕光燈設定。
色溫範圍為 2700k 至5700k。
[注意]
1. 補光燈功能出廠預設值設定為手動模式。您可使用 PTZApp 2 更改為自動模式，當串流開啟時，補
光燈會開啟並依據會議室實際環境自動調整亮度。
2. 在手動調光模式下，使用者可利用 AVer PTZApp 2 調整進階亮度設定。
3. 連接電源變壓器時補光燈亮度會較亮。
4. 當打開 USB 串流時如需拔除電源變壓器，請先關閉補光燈，以避免系統關閉。
5. 若您的 CAM130 內容攝影機連接至電腦 USB 2.0 埠，請使用電源變壓器以支援補光燈功能。
透過遙控器控制補光燈
長按 或任一按鍵 1~2 秒可開啟/關閉補光燈功能。
[注意]當補光燈開啟時，按住 或按鍵可增加/減少亮度。

繁體中文-16
遙控器
智慧對焦( )：按一下此鍵，啟動攝影機自動對焦調整以包合所有參與者。長按按鍵 1 ~ 2 秒，可
以切換智慧對焦功能為手動、自動(Auto Framing)或預設點框選模式或關閉此功能。
確定( )：按下可在畫面上顯示目前的 AI 功能，例如自動(Auto Framing)。
載入預設點位置快捷鍵( )：按下可依序移至使用者所設定的預設點位置。
數字 0 ~ 9：長按數字鍵可設定預設點。短按一下數字鍵可載入預設點位置。
FOV：依序按下 和可變更鏡頭視野為 90 度或 120 度。
WDR：依序按下 和可啟用/停用 WDR 功能。
麥克風：依序按下 和可啟用/停用麥克風功能。
長按 或鍵1 ~ 2 秒可開啟/關閉補光燈功能。
當補光燈關閉時，按下 / 鍵可增加/降低影像亮度。
當補光燈開啟時，按下 / 鍵可增加/降低補光燈亮度。

繁體中文-17
安裝
您可使用白板支架 (請參閱套裝配件包裝) 將CAM130 內容攝影機安裝於牆面或天花板。
壁掛模式
懸吊模式
請確認攝影機捕捉到完整白板畫面
轉動旋轉環可鬆開/拴緊，
以調整伸縮桿長度
可將USB延長線收納至集線盒
可調整攝影機角度
白板
至少1公尺
準備設備:
1. CAM130 內容攝影機。
2. USB3.1 Type-C 轉Type-A 連接線 (1.8 米，含在 CAM130 內容攝影機配件包裝裡).
3. AVer 白板支架配件組 (含伸縮桿、集線盒及 2顆M4x5mm 螺絲)。
4. AVer USB3.1 延長線 (10 米，含在套裝配件包裝，另提供 20 米及 30 米可選配)。
5. MTR 系統 (支援 USB3.0 埠)。

繁體中文-18
1. 將集線盒底座安裝於牆面位於白板/IFP 中線上方 3公分處 (或安裝在天花板上)。
[注意] 安裝 CAM130內容攝影機前，請先準備 3顆螺絲 (配件包無附)
。底座三個螺絲孔的直徑為 Ø 6mm 。
3 - Ø 6mm
205mm
60mm
2. 將連接線 (Type A 端) 置入伸縮桿直到底端。連接線另一端預留 20 公分長以連接攝影機。
Type C Type A
20cm