Avermedia AVerDVR TV2VGA Reference manual

Introduction
Thank you for purchasing AVerMedia®AVerDVR TV2VGA. AVerDVR TV2VGA
converter is an inexpensive solution for DVR that only support TV output to display
video on LCD/CRT monitor. It supports PAL and NTSC video systems and
provides up to 1280 x 1024, 60~85Hz.
AVerDVR TV2VGA is easy to install and use. Control buttons are provided for
easy screen positioning and adjustment.
Package Contents
AVerMedia
®
AVerDVR TV2VGA
Power adapter
Manual
Hardware Connection
DVR
Power adapter
2
BNC VIDEO OUT
LCD Monitor
Television
3
BNC VIDEO IN
Monitor Cable
1
N/P
Note: Makesurethe DIPswitch is
set according tothe DVR
video system.
The power adapter varies depending
on the standard power outlet of the
country where it is sold.
Back Panel
4
*

Control Buttons
Move the picture to the left. The picture would automatically
return to the rightmost of the screen when it reaches the end.
Move the picture up. The picture would automatically return
at the bottom of the screen when it reaches the end.
Press to cycle through 9 contrast levels.
Press to cycle through 9 brightness levels.
-Call up the picture menu.
-Press for about 6 sec. to restore to its original factory
picture setting.
Picture Menu
Press to call up the picture menu. Then, use to select the desired
function and use to adjust. The table below lists the picture menu items and
their available settings.
Note : When the LCD monitor does not support the new setting, the screen
normally turns blank. Just continue pressing to select other settings.
RESOLUTION FREQUENCY HUE SATURATION CONTRAST BRIGHTNESS
640 x 480
800 x 600
1024 x 768
1280 x 1024
60 Hz
70 Hz
72 Hz
75 Hz
85 Hz
Support
9 levels
Support
9 levels
Support
9 levels
Support
9 levels
http://www.avermedia.com