Avery Dennison N95 User manual

N95 FIT TEST & QUICKSTART GUIDE
Please read and familiarize yourself with all instrucons below.
Before you start: Use an alcohol pad (recommended) to ensure face is clean, air dry before
donning mask. Use a mirror to verify proper placement.
Pracce applying the mask at least 3 mes before conducng a fit test. Be sure to use a new
mask when conducng the actual fit test.
1.
3.
2.
4.
REMOVE THE RELEASE LINER
Peel back and remove the enre white
release liner from the back of the mask.
SEAL THE TOP
Using your middle finger, press the mask
down on the bridge of your nose. Press
down with both index fingers starng from
the bridge of your nose out horizontally
towards your ears, ensuring the mask is
sealed securely around the contours of
your nose and upper cheekbones.
ALIGN THE MASK TO FACE SHAPE
Hold mask with both hands, colored side
out, horizontally with the center just
below the bridge of your nose.
SEAL THE SIDES
Open your mouth as if saying the word
“NO” and slide your fingers down the
sides of the mask towards your chin unl
your fingers meet. This will ensure you
have enough room to breathe and talk
comfortably.
TIPS FOR PROPER APPLICATION:
- For best performance, posion the printed label strip below the chin
- Use of excess makeup or moisturizer may interfere with the seal
- Mask must be horizontal under the eyes and rest on the tops of the cheekbones
- Use your fingerps to firmly apply the mask
- Avoid wrinkles in the mask
Horizontal
applicaon on
the tops of the
cheekbones
towards the ears
is crucial. If the
mask is axed
in a downward
slope towards
the boom of
the cheekbones,
it could cause
improper fit.
✓
x

5.
6.
SEAL THE CHIN
Use your fingers to pinch together the remaining mask. Pull the boom of the mask flat against
your chin pulling it to one side and use your other hand to push against the boom of your chin
to ensure a good seal. Then pull the chin flap the other direcon and repeat.
CHECK FOR PROPER FIT
Run fingers along the perimeter of the mask. If properly donned, the top border should be
horizontal across your upper cheek bones toward your ears, not sloping downward. A tab
should be formed along the boom of the chin from the neck to the end of the chin. Make sure
the mask is sealed on the underside of the chin.
CHECK THE SEAL
Conduct a User Seal Check by breathing in and out deeply. You should not feel any air leaking
along the edges of the mask. Over any area where air is felt you should apply pressure on
those areas and retrace the adhesive seal border.
Device is available under EUA per FDA Guidance Enforcement Policy for
Face Masks and Respirators During the Coronavirus Disease (COVID-19)
Public Health Emergency (May 2020).
Global Safety First, LLC for Avery Dennison Medical.
NIOSH Approval# TC-84A-8133
MTR-MKT-000369-B
PROPER FIT
TAB
PULL PULL
PRESS PRESS
NO
TAB
IMPROPER FIT
TIPS FOR STORAGE AND USAGE:
- Pracce applying the mask at least 3 mes before conducng a fit test
- Use of excess makeup or moisturizer may interfere with the seal
- Mask must be horizontal under the eyes and rest on the cheekbones
- Use your fingerps to firmly apply the mask
- Avoid wrinkles in the mask
- If mask is reapplied, check to ensure a proper leak-free seal