Zeiss OPMI Lumera T User manual

OPMI Lumera®T
with Integrated
Assistant's Microscope
Instructions for use
G-30-1682-en
Issue 4.0
Printed on 02. 02. 2009

2
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Key to symbols
Different symbols used in this manual draw your attention to safety as-
pects and useful tips. These symbols are explained in the following.
Warning!
The warning triangle indicates potential sources of danger which may
constitute a risk of injury for the user or a health hazard.
Caution:
The square indicates situations which may lead to malfunction, defects,
collision or damage of the system.
Note:
The hand indicates hints on the use of the system or other tips for the
user.
OPMI®, Lumera®, Superlux®, Invertertube®and HaMode®are regis-
tered trademarks of Carl Zeiss Surgical GmbH.

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Contents
– Key to symbols 2
Functions at a glance 7
– OPMI Lumera T with integrated assistant's microscope 8
– OPMI Lumera T (option) 9
– Light sources 10
– S88 floor stand 12
– S8 ceiling mount 14
– S81 ceiling mount 16
Safety 19
– Notes on installation and use 21
– When using a wide-angle observation system (e.g. BIOM 3) 25
– Phototoxic retinal injury in eye surgery 25
– Safety devices of the suspension systems 32
– Warning labels and notes 44
Description 51
Lumera T surgical microscope 54
– Intended use 54
– Description of components 54
– Illumination system 60
– Controls, displays, connections 64
– Binocular tubes and eyepieces 72
Light sources 78
– Halogen light source (option) 80
– Superlux Eye light source 84
– Superlux Eye with integrated halogen light source (option) 92
Identical components of the suspension systems 98
– Suspension arm 98
– Display field with control keys 100

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
S88 floor stand 102
– Intended use 102
– Description of components 103
–Design 104
– Stand base with column 106
– Connection panel 108
– Instrument tray (option) 110
– Video monitor (option) 112
S8 ceiling mount 120
– Intended use 120
– Description of components 121
–Design 122
– Power switch with connector (option) 124
S81 ceiling mount 126
– Intended use 126
– Description of components 127
–Design 128
– Power switch, connector and socket (option) 130
OPMI Lumera T with integrated assistant's microscope
on S88 floor stand 132
– Intended use 132
–Design 132
OPMI Lumera T with integrated assistant's microscope
on S8 ceiling mount 134
– Intended use 134
–Design 134
OPMI Lumera T with integrated assistant's microscope
on S81 ceiling mount 136
– Intended use 136
–Design 136
Foot control panel 138
– Intended use 138
–Design 138

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Preparations 143
Attaching the equipment 144
– Mounting the surgical microscope 144
– Mounting the tube, the eyepieces and the objective lens 148
– Changing the microscope accessories 152
Connections 154
– Connecting the surgical microscope 154
– Connecting the light guide 154
– Strain relief device on S88 floor stand 158
– Connecting the S88 floor stand 160
– Relocating the system 162
Adjusting the supension system 164
– Adjusting the balance setting of the suspension arm 164
– Adjusting the limit of downward movement 166
– Positioning the S8 ceiling mount 168
Settings on the control and display panel 170
– Setting up the suspension system 170
Adjusting the surgical microscope 171
– Optimizing the red reflex 172
– Adjusting the tilt angle 174
Preparing the system for sterile use 176
Operation 179
Checklist 180
– When using a wide-angle observation system (e.g. BIOM 3) 183
Positioning the S88 floor stand 184
Using the display and key field 186
– General functions 186
– Operating the OPMI® on the suspension system 190
Procedure 203
What to do in the event of malfunctions 205
What to do in an emergency 206
– Lamp failure of the halogen light source 206

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
– Lamp failure in the Superlux Eye light source 208
– Failure of lamp control 212
– Failure of the focusing function 212
– Failure of magnetic brakes 214
– Failure of the X-Y coupling 214
– Failure of the zoom function 215
Causes of malfunctions and remedies 216
– Malfunctions in the surgical microscope 216
– Malfunctions in the surgical microscope with integrated
assistant's microscope 218
– Malfunctions in the S8, S81 or S88 suspension system 219
– Malfunctions in the video monitor 221
– Malfunctions in the halogen light source 223
– Malfunctions in Superlux Eye light source 224
Care and maintenance 227
– Care of the unit 228
– Sterilization 229
– Disinfecting the control keys 230
– Changing the halogen lamp 232
– Changing the Superlux Eye xenon lamp module 234
– Balancing the monitor arm 236
System data 239
– Technical data 240
– Magnifications / Fields of view 256
– Ordering data 257
– Spare parts 259
– Disposal 260
– Ambient requirements 261
– CE conformity 261
– Changes to the system 261
Index 263

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Functions at a glance 7
Functions at a glance
OPMI Lumera T with integrated assistant's microscope 8
OPMI Lumera T (option) 9
Light sources 10
S88 floor stand 12
S8 ceiling mount 14
S81 ceiling mount 16

8Functions at a glance
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
OPMI Lumera T with integrated assistant's microscope
1 Resetting X-Y coupling and focus to their initial positions page 64
2 Adjusting the interpupillary distance page 72
3 Adjusting the eyecups page 76
4 Setting your prescription page 76
5 Unlocking the magnetic brakes page 66
6 Display of the zoom system's magnification factor page 66
7 Changing the magnification of assistant's microscope page 70
8 Setting the inverter function page 70
9 Focusing the assistant's microscope page 70
10 Tilting the surgical microscope page 174
11 Arrows indicating the focusing range page 64
12 Locking screw for assistant's microscope (vertical) page 70
13 Zoom adjustment (manual emergency operation) page 215
14 Adjusting knob for different types of illumination page 68
15 Connecting the light guide page 154
16 Locking screw for assistant's microscope (horizontal) page 174
17 Setting the depth of field (DeepView) page 68
1
2
3
4
5
6
910 127141311
5
7
34 15 16 178

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Functions at a glance 9
OPMI Lumera T (option)
1 Resetting X-Y coupling and focus to their initial positions page 64
2 Tilting the surgical microscope page 174
3 Adjusting the eyecups page 76
4 Setting your prescription page 76
5 Unlocking the magnetic brakes page 66
6 Display of the zoom system's magnification factor page 66
7 Setting the depth of field (DeepView) page 68
8 Setting the illumination page 62
9 Arrows indicating the focusing range page 64
10 Adjusting the interpupillary distance page 72
11 Zoom adjustment (manual emergency operation) page 215
12 Connecting the light guide page 154
1
2
3
4
5
6
810 71211
9
5
2

10 Functions at a glance
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Light sources
Halogen light source
1 - Closed flap: main lamp is on
- Open flap: backup lamp is on
page 80
2 Selecting a filter page 80
3 Opening the lamp module page 80
4 Manual activation of backup lamp page 80
Superlux Eye light source
5 Selecting a filter page 84
6 Resetting the counter page 88
7 Opening the lamp module page 84
8 Manual activation of backup lamp page 84
9 Red segment is lit - backup lamp is in use page 84
124356 8
79

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Functions at a glance 11
Superlux Eye light source with
integrated halogen light source (option)
1 Selecting the filter for Superlux Eye light source page 93
2 Switching manually to the backup lamp of
Superlux Eye light source
page 93
3 Resetting the counter page 38
4 Opening the Superlux Eye lamp module page 80
5 Additional integrated halogen light source:
- Closed flap: main lamp is on
- Open flap: backup lamp is on
page 94
6 Selecting the filter for additional integrated halogen
light source
page 94
7 Opening the lamp module of integrated halogen
light source
page 94
8 Manual activation of the halogen light source's
backup lamp
page 94
9 Superlux Eye light source:
red segment is lit - backup lamp is in use
page 94
2456 78 913

12 Functions at a glance
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
S88 floor stand
1 Control unit page 186
2 Light source page 78
3 Unlocking the magnetic brakes of the suspension
system
page 98
4 Limiting the suspension arm's downward movement page 166
5 Removing/mounting the coupling for the
surgical microscope
page 98
6 Balancing the suspension arm page 164
7 Locking the stand in position page 106
8 Locking the suspension arm in its horizontal position page 98
9 Connecting the foot control panel,
connecting the remote control connector
page 108
10 Rated voltage display page 108
11 Connector panel page 108
12 Switching on the suspension system page 108

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Functions at a glance 13
12 4356
7 4 8910,11,12

14 Functions at a glance
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
S8 ceiling mount
1 Locking the suspension arm in its horizontal position page 98
2 Unlocking the magnetic brakes of the suspension
system
page 98
3 Balancing the suspension arm page 164
4 Light source page 78
5 Control unit (rotatable through 180° or 70°) page 186
6 Connecting the foot control panel,
connecting the remote control connector
page 124
7 Switching on the suspension system page 124
8 Releasing - moving - locking the lift arm page 122
9 Removing/mounting the coupling for the
surgical microscope
page 98
10 Limiting the suspension arm's downward movement page 166

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Functions at a glance 15
102798
15623 4

16 Functions at a glance
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
S81 ceiling mount
1 Locking the suspension arm in its horizontal position page 98
2 Unlocking the magnetic brakes of the suspension
system
page 98
3 Balancing the suspension arm page 164
4 Light source page 78
5 Control unit (rotatable through 180° or 70°) page 186
6 Connecting the foot control panel if the suspension
system is installed on a ceiling track mount (option)
page 130
7 Connecting the remote control connector page 130
8 Connecting the foot control panel page 130
9 Switching on the suspension system page 130
10 Removing/mounting the coupling for the
surgical microscope
page 98
11 Limiting the suspension arm's downward movement page 166

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Functions at a glance 17
10 112
9
456123 87

18 Functions at a glance
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009

G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
Safety 19
Safety
Notes on installation and use 21
When using a wide-angle observation system (e.g. BIOM 3) 25
Phototoxic retinal injury in eye surgery 25
Safety devices of the suspension systems 32
Warning labels and notes 44

20 Safety
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
The device described in this manual has been designed and tested in ac-
cordance with Carl Zeiss safety standards as well as German and inter-
national standards. This guarantees a high degree of instrument safety.
The system described in this user manual has been designed in compli-
ance with the requirements of:
In accordance with Directive 93/42/EEC for medical devices, the com-
plete quality management system of the company Carl Zeiss Surgical
GmbH, 73446 Oberkochen, Germany, has been certified by DQS Deut-
sche Gesellschaft zur Zertifizierung von Managementsystemen GmbH, a
notified body, under registration number 250758 MP23.
– As per Directive 93/42/EEC, the unit is a Class I instrument.
– For USA: FDA classification Class I.
We would like to provide you with information about safety aspects which
must be observed when handling this device. This chapter contains a
summary of the most important information concerning matters relevant
to instrument safety.
Important safety information has been incorporated in this manual and is
marked with a warning triangle accordingly. Please give this information
your special attention.
The correct use of the system is absolutely vital for safe operation. Please
make yourself totally familiar with the contents of this manual prior to start-
up of the instrument. Please also observe the user manuals of any addi-
tional equipment. Further information is available from our service depart-
ment or from authorized representatives.
• Please observe all applicable accident prevention regulations.
• The instrument must be connected to a special emergency backup
line supply in accordance with the regulations or directives which ap-
ply in your country.
–EN –IEC –UL –CSA