Avid Power AWT106B User manual

SOCKET TESTER
MODEL: AWT106B

2
Socket tester is mainly used for power socket wiring detection and RCD/GFCI test. It
can detect the wiring status of the socket quickly and accurately.With LCD Screen, it can
also measure the voltage of the socket and display that.
Please read the instruction manual carefully before use and strictly follow the
safety rules and the caution, attention and warnings listed in the instruction
manual.
With LCD Screen
Warning
To avoid possible electric shock or personal injury:
Please check the tester carefully before using it and conrm if there is any damage. If
there is any damage, please stop using it immediately and repair it.
Check whether the tester display is correct. Insert the tester into a known correct
socket for testing and ensure that the test function is normal before using it.
The RCD/GFCI test must be properly operated under the correct wiring.
When testing RCD/GFCI, please close the equipment on the power line to ensure
that power failure does not cause any harm. When testing in public places, it must be
permitted to test.
WARNING
SAFETY INSTRUCTION

3
When using the tester to detect the wrong wiring of the socket, please nd
professional electrician to maintain wiring.
Operating voltage: 48~250V/45~65Hz
Measure voltage (with LCD): 48~250V/45~65Hz
Accuracy: ± (2.0%+2)
Operating temperature: 0°C~40°C
operating Humidity: 20%~75%RH
Storage temperature: -10°C~50°C
Storage Humidity: 20%~80%RH
Altitude: ≤2000m
RCD test: >30mA
RCD working voltage: 220V±20V
GFCI test: >5mA
GFCI working voltage: 110V±20V
Note: RCD and GFCI functions do not coexist
Socket tester
Insert the tester into the standard three hole power socket, then observe the indicator
light and the function table, judge whether the socket connection is correct, and then
pull out the tester. When the wrong connection occured, please nd a professional
electrician to repair the wiring.
Note:
The test time lasts no more than 5 minutes
SAFETY INSTRUCTION
TECHNICAL SPECIFICATIONS
OPERATION DESCRIPTION

4
When using, please be careful not to touch the RCD/GFCI button, and not to trigger
the leakage protection switch to avoid unnecessary losses.
Voltage test (with LCD)
Insert the tester into a standard three hole power outlet. Read the socket voltage value
from the tester screen, the unit is V.
Note:
The test time lasts no more than 5 minutes
When using, please be careful not to touch the RCD/GFCI button, and not to trigger
the leakage protection switch to avoid unnecessary losses.
RCD (or GFCI) Test
Insert the tester into the correctly connected three hole power socket, press the button
(less than 3 seconds), and the normal RCD/GFCI will trip o󰀨 at this time, if it does not
trip o󰀨, it indicates that the RCD/GFCI is damaged. Please nd professional electrician
to maintain it in time.
Functional control table
Red Red Red
CORRECT ● ● ○
OPEN GROUND ● ○ ○
OPEN NEUTRAL ○ ● ○
OPEN LIVE ○ ○ ○
LIVE/GRD REVERSE ○ ● ●
LIVE/NEU REVERSE ● ○ ●
LIVE/ GRD REVERSE; missing GRD ● ● ●
Note:
LIVE/GRD RESVERSE, missing GRD: It is the reverse connection between the live
line and ground line, and the ground line is disconnected.
This tester cannot distinguish between neutral line and ground wire reversly
connected.
Clean
Clean with a wet cloth, Cleanliness or other chemicals are not available
Notes: After cleaning, the tester must be dried before it is used again.
OPERATION DESCRIPTION