Avid Technology CNC Rotary Axis User manual

Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2

Section 1: Rotary Assembly
An assembly video is available as a complimentary guide for assembling your Avid CNC rotary axis:
https://youtu.be/Q5iYg01Lw1w
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1 Frame Assembly - Recessed Mounted
Section Note
Skip to Section 1.2 if you are mounting the rotary assembly on top of your table top or spoil board.

Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

Parts and Tools Required
The following parts and tools will be used in Section 1.1
QTY Part/Description Packaged In
1 4080 Extrusion, 272mm (10-11/16") Extrusion Box
2 4040 Extrusion, 272mm (10-11/16") Extrusion Box
2 4040 Frame Extrusion, (length dependent on rotary size) Extrusion Box
1 CRP190-00-FAST: CRP190-00-BASE
- (12) M8 x 30mm Socket Head Cap Screw
- (12) 40 Series Anchor Fastener
- (4) M8 Roll-in T-Nut
- (4) M8 Double Slide-in T-Nut
Required Tools:
- 6mm Ball-End Allen Wrench
- Tape Measure
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1 Assembly Steps
1.1.1.1
Thread a socket head cap screw into the T-Nut through the anchor fasteners, as indicated.
4080 Extrusion, 272mm (10-11/16")
M8 x 30mm Socket Head Cap Screw
40 Series Anchor Fastener
M8 Roll-in T-Nut
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1.2
Slide the anchor assembly into the 4080 extrusion.
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1.3
Repeat this process at each corner of the extrusion.
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1.4
Slide the 4080 extrusion assembly into the 4040 frame extrusion pieces as indicated.
4080 Extrusion Assembly
4040 Frame Extrusion
Assembly Note
The length of your 4040 frame extrusion will vary depending upon the overall length of your rotary assembly.

Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1.5
Insert a socket head cap screw through the anchor fastener as indicated.
4040 Extrusion, 272mm (10-11/16")
M8 x 30mm Socket Head Cap Screw
40 Series Anchor Fastener
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1.6
Slide the anchor fastener into the 4040 extrusion.
Partially thread the fasteners into the double T-Nut as indicated.
40 Series Double T-Nut
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1.7
Repeat this process with the remaining 272mm (10-11/16") piece of 4040 extrusion.
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1.8
Slide a 4040 extrusion assembly into the rotary frame on each end as indicated.
4040 Extrusion Assembly
4040 Extrusion Assembly
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1.9
Position the 4040 extrusion flush with the ends of the rotary frame as indicated.
Fully tighten the 4040 extrusion assembly fasteners.
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1.10
Position the 4080 extrusion assembly 120mm (4-3/4") from the end of the rotary frame as indicated.
120mm (4-3/4")
120mm (4-3/4")
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.1.1.11
Partially tighten the 4080 extrusion assembly anchor fasteners.
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.2 Frame Assembly - Table Top Mounted
Section Note
Skip to Section 1.3 if you are recess mounting your rotary assembly.

Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

Parts and Tools Required
The following parts and tools will be used in Section 1.2
QTY Part/Description Packaged In
1 4080 Extrusion, 272mm (10-11/16") Extrusion Box
1 4040 Extrusion, 272mm (10-11/16") Extrusion Box
2 4040 Frame Extrusion, (length dependent on rotary size) Extrusion Box
1 CRP190-00-FAST: CRP190-00-BASE
- (8) M8 x 30mm Socket Head Cap Screw
- (8) 40 Series Anchor Fastener
- (4) M8 Roll-in T-Nut
- (2) M8 Double Slide-in T-Nut
Remaining parts from this kit are not used in spoil board mounted configuration
Note: Spoil board mounted configurations will not use the second piece of 4040 extrusion, 272mm (10-11/6")
Required Tools:
- 6mm Ball-End Allen Wrench
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.2.1 Assembly Steps
1.2.2.1
Thread a socket head cap screw into the T-Nut through the anchor fasteners, as indicated.
4080 Extrusion, 272mm (10-11/16")
M8 x 30mm Socket Head Cap Screw
40 Series Anchor Fastener
M8 Roll-in T-Nut
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.2.2.2
Slide the anchor assembly into the 4080 extrusion.
Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved

1.2.2.3
Repeat this process at each corner of the extrusion.
Assembly Note
Note the position of the Roll-in T-Nuts, with the long side oriented towards the center of the extrusion.

Avid CNC Rotary Axis
Assembly Instructions
Version 2019Q4.2
© 2019
All Rights Reserved