Avio iP-01UE User manual

A Proposal for New
Presentations
Intelligent Projector
User’s Manual
iP-01UE/BE
ON/STANDBY
LAMP/COVER
TEMP
FREEZE OFF
FREEZE
PORTRAIT
INPUT

E-2
Thank you for your purchase of an AVIO product.
Please read this manual carefully in order to use the projector properly.
After reading this, please keep it in a safe place together with the warranty sheet.
Features of the iP-01
• Versatileprojectoroffers4rolesinoneunit.Aprojectorforthemultimediaage.
1. Projection of documents, catalogs, and other printed materials. Printed materials can be projected directly without the
creation of OHP lm.
2. Projection of personal computer screen images
Detailed presentations can be made using a personal computer.
3. The video images of video tape decks, DVDs and other equipment can be projected.This permits the creation of pre-
sentations that are visually appealing.
4. Use of a USB memory stick permits presentations without the use of a personal computer (PC).
* This function is available only for the iP-01UE model only.
• Easilyunderstood,simpleoperationforeveryone
One button operation simply switches the projection of printed material, personal computer screen, and video image.
• Designedforaconservationofresourceswhichoffersexcellentcostperformance
The creation of OHP lm is not required. This allows a reduction of wasteful time and costs.
• Expressivecolorpictures
Contains a high resolution, 3.15 million pixel single-board color CMOS camera. Faithfully and clearly reproduces in full color
with 16.77 million colors including the ne intermediate shades of a color manuscript.
• Enlargeddisplaywithoutchangingthescreensize
When projecting documents having small characters that were not created for presentations, such as catalogs and word-pro-
cessed documents, the iP-01 can enlarge the document without changing the screen size to provide an easy-to-view display.
• ProvidedwithdisplayfunctionsforcompressedorenlargedPCscreen
Screens of resolution more than 1024 768 dots are displayed compressed to 1024 768 dots without any loss in charac-
ter quality. Such as 640 480 resolution screens can also be enlarged to 1024 768 dots.
* See Page E-21 of this manual for information about supported resolutions.
About Trademarks
NEC and the PC-9800 series are trademarks of NEC Corporation.
IBM and PC/AT are trademarks or registered trademarks of International Business
Machines Corporation.
Macintosh and Power Book are trademarks of Apple Computer Inc.
Windows is a trademark of U.S. Microsoft Corporation.
DLP ® and the DLP logo are registered trademarks of Texas Instruments.
Adobe, Adobe logo, and Acrobat are trademarks of Adobe Systems Incorporated.
Warnings and Safety Precautions
Warning Symbols
To alert the user to important safety precautions, the following symbols are used
in this manual and on the product. Make sure you understand what these sym-
bols mean before operating the projector.
WARNING Death or serious injury may result if this warning is ignored.
CAUTION Injury or damage to the equipment may result if this warning is ignored.
NOTE This indicates an item that you should take care of when handling your projector.
This symbol alerts the user to high voltage that could cause electric shock.
Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.

E-3
WARNING
• Concerningtheuseofthisprojector:
• Itisanticipatedthatthisprojectorwillbeusedbyadults.Especiallywhenchildrenyoungerthanjuniorhighschoolstu-
dents will be using this projector, we ask that an adult always attend the use of the projector for safety.
• Ifafaultoccurs:
• Ifyoudetectsmoke,orastrangesmellorsound,immediatelydisconnectthepowercable.
It is dangerous to continue using the projector after a fault occurs. Return the projector to the dealer where it was
purchased for repair.
• Avoidplacingtheprojectorneardangeroussubstances.
• Makesurethatnometallicorammablematerialcangetintotheprojectorthroughtheairvents.
• Donotplaceanyobjectscontainingwaterontopofornexttotheprojector.
• Ifforeignmattergetsinsidetheprojector:
• Ifforeignmattersuchaswaterormetalgetsinside,immediatelydisconnectthepowercable.
It is dangerous to continue using the projector when foreign matter gets inside. Return the projector to the dealer where it
was purchased for servicing.
• Donotremovethecabinet.
• Do not remove the cabinet.There are high-voltage components inside and touching these parts could cause electric
shock, or damage the equipment.
• Handlethepowercablesafely.
• Donotplaceanyheavyobjectsontopofthepowercable.
Damage to the power cable can cause wire breakage, re, or electric shock.
• Donotpullthepowercablewhendisconnectingthepowerplug.
Pulling the cable may break the wires or cause re or electric shock. Always hold the plug itself when pulling it out of the
power outlet.
• Donotdamagethepowercable.Ifthepowercableisdamaged(e.g.thecoreisexposedorcut),contactthesalesoffice
ofpurchase.(charged)itcouldcausereorelectricshockifyoucontinueusingthedamagedpowercable.
• Donotpeepintothelens.
• Donotpeepintothelensoftheprojectorduringoperation.Thepowerfulrayspassingthroughthelenscoulddamagethe
eyes.
• Donotbringyourfaceclosetotheventilationslots
• Donotbringyourfaceclosetotheventilationslotsbecauseshouldthelampexplode,particlesandmercurycontainedin
the gas could enter your eyes or mouth. This could cause injury.
 (Ifforeignmatterhasenteredaneye,pleasereceiveamedicalexaminationatanearbyhospital.)
• Donotputtheprojectorinunstableplaces.
• Donotputtheprojectorinunstableplacessuchasonunstabledesksorslopes.
Doing so could cause the projector to drop or turn over, resulting in injury.
• Donotturnonthelightoftheprojectorunlesstheprojectorisinstalledhorizontally
• Donotturnonthelightoftheprojectorwhentheprojectorisorientedotherthanhorizontally:upsidedown,facingup,on
its side, or facing down. Doing so may cause a re or lamp explosion.
• Donotuseanyvoltagesotherthanspecied.
• Donotuseanyvoltagesotherthanspecied.Doingsocouldcausereorelectricshock.
• Donotbeattheglasssurface
• Donotbeattheglasssurfaceoverthescanner.Doingsomaybreaktheglass,resultingininjury.
• Donotgetontheunit.Donotputaheavymatteronit.
• Donotgetonorputaheavymatterontheunit.Negligencetoobserveitcausesdamageorafailure.
Depending on the case, the glass face may be broken, causing injury.
• Donottouchtheairventsorlampcover
• The air vents, lamp cover, and peripheral surfaces may be high temperature during operation or just after the light is
turned off.
Do not touch those for a long time.
• Theareaaroundtheprojector’sexhaustoutletgetsveryhot.Donotplacetheprojectorontables,deskmats,etc.,that
are vulnerable to heat. The table may be discolored, the desk mat warped, etc.
Safety Precautions

E-4
Safety Precautions
• Donotblockthelensfront
• Donotblockthelensfrontduringoperation.
The powerful rays passing through the lens may cause re or burns if you put anything in front of the lens or block the
lens with your hand during operation.
Warning
Please check the rating of the power cable.
Prior to using a power cable, please make sure that the cable is fully compliant with the power ratings and the type of the plug in
the area and, if not, purchase proper power cable for the area. Do not use the cables for 120V rating to 220V power source.
Using improper cable may cause re or electrical shock to human body.
CAUTION
• Installation
• Avoidinstallingtheprojectorinplaceswhereitmaybeexposedto:
- On tables, etc., that are vulnerable to heat.
- Strong vibrations
- Soot or steam
- Directsunlightornearaheater(35°C/95°Forhigher)
- High humidity or dust
- Extremecold(0°C/32°Forlower)
- Strong magnetic or electric eld generated from a nearby appliance
- Wobbling on an unstable surface
• Dependingontheinstallationenvironment(e.g.,besideawallorwhenaffectedbyairconditioningaircurrents),thehot
air expelled from the front may cause heat haze and the projection image may waver.
• Donotblocktheairvents.
• Donotblocktheairventswithclothoranobject.
When you put anything around the unit, be sure to ensure a space of 10 cm/4 inches or more between the unit and
the air vent. Be sure to prevent paper or cloth from blocking the air vent at the bottom of the unit. If blocked, the internal
temperature may increase, resulting in malfunctions.
• Donotbumptheprojector.
• Avoidbumpingtheprojectorwhenmovingorhandling.Shockscancausedamage.
• Careoftheprojector
• Topreventriskofaccidents,alwaysdisconnectthepowerplugbeforecleaningtheprojector.
• Cleanthelenssurfacewithacommercialblowerorlenscleaningpaper.
Wiping with tissue paper or a handkerchief can damage the lens.
• Tocleanthecabinet,operationpanel,andglasssurface,wipegentlywithasoftcloth.Forparticularlydirtyspots,soak
the cloth in a neutral detergent mixed in water, wring out well and wipe off the dirt, then use a dry cloth to wipe dry.
• Donotwipetheprojectorwithanyvolatilesolventsuchasbenzineorthinner.
The surface may change in quality, and the markings may peel off.
If using an impregnated cloth, follow the instructions of the cloth.
• Avoidscratchingtheglasssurface.
• Takecarenottoscratchtheglasssurfaceofthescannerwithhardorpointedobjects.
Scratches on the glass may distort the projected image.
• Battery
• Wheninsertingbatteryintheremotecontrol,notethepolarity(plusandminussigns) andinsertcorrectly asindicated.
Inserting a battery in a wrong direction can cause rupture or leakage, and could result in fire and injury or soil the
surrounding area.
• Donotusecoinbatteryotherthanthetypespeciedfortheequipment.Incorrectbatteryusagecouldresultinruptureor
leakage, and could cause re and injury.
• Donotheat,breakopen,burn,orimmersethebattery.Batteryruptureorleakagecouldcausereandinjury.
• PerchlorateMaterial-specialhandlingmayapply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/index.cfm.

E-5
Safety Precautions
• Dewcondensation
• Abruptlymovingtheunittoaplacewherethereisagreattemperaturedifferencecausesdewcondensationonthemain
unit.
Projection under a dew condensed state causes a failure.
• Servicingandcleaning
• Have the internal components cleaned by a retailer about once a year.There is a risk of re or faulty operation if the
inside of the projector gets dusty and is not cleaned for a long time. For best results, the projector should be serviced
before the wet season brings damp conditions. Cleaning charges are at the discretion of the retailer.
• Ifnotusingtheprojectorforalongperiod:
• Ifyoudonotplantousetheprojectorforalongtime,disconnectthepowercableforsafety.
• Disposal
• Followtherecommendationsofyourlocalauthoritywhendisposingoftheprojector.
• Transportingtheprojector
• Usethespecialpackagingwhentransportingtheprojector.Themanufacturercannotacceptresponsibilityintheeventof
damage or accident if other packaging is used.
• Usethespecialpackagingnomorethantwotimes.Repeatedusagereducestheshockabsorbencyofthepackagingand
can lead to damage or accident.
• Transporttheprojectorafterthetiltstandiscompletelystored.
• Contacttheretailerifyourequirenewpackaging.
• Lampimplosion
• ADCtypeSuperHighpressurelampisusedinthisprojectoranditisrareforthelamptoexplodeduringuse.Theunitis
also designed to forcibly turn off the lamp because there is a high possibility that the lamp will break if it is used beyond
thelampusageof2000hours(RefertopagesE-46andE-47).
Note the following things
• Therewillbealoudsoundwhenalampexplodes.Theloudsoundisduetotheveryhighpressureinsidethehigh-pres-
sure mercury lamp.
At this time, there is a risk that ne particles of glass and other material that result from the lamp explosion may be re-
leased to the outside from the ventilation slots.
 Duringuse,donotbringyourfaceclosetothevicinityoftheventilationslots(attheprojectorfront,side,andrear).
• Whenalampexplodes,thegasfromwithinthelampisreleasedtotheoutsidefromtheventilationslotsandresemblesa
white smoke; however, this is not produced from heat generation or a re. Note that mercury is contained in the gas inside
the lamp, and because of this, when a lamp has exploded, appropriate action should be taken including the opening of
windows and doors. Also, in the event that someone has inhaled the gas, please contact a doctor immediately.
Remedy
• Aproductcontainingalampthathasexplodedduringusemayhavelampfragmentsscatteredwithintheproduct;there-
fore, without replacing the lamp please request repair service from the store of purchase, the dealer, or elsewhere.
Lamp replacement must not be undertaken by the customer when a lamp has exploded. Doing so will result in injury from
the lamp fragments, etc.
• Replacingthelamp
• Besuretoturnthelampoffanddisconnectthepowercablewhenthefanstops,andwaitanhourormorebeforereplac-
ing the lamp.
Replacing the lamp during operation or just after the power is turned off may cause burns due to heat.
Refer to “Replacement of the Lamp Unit” on page E-46 for the procedure.
• Inregardtothedisposalofthelampunit,followthedisposalmethodofyourmunicipalityforthesametypeofwasteas
commonhouseholduorescenttubes.
• Cleaningtheventilationinletsandoutlets
• Tocleantheventilationinletsandoutlets,unplugthepowerplugfromthepoweroutletafterthecoolingfanstops.
Removal while the cooling fan is rotating may cause injury.
Please read “Cleaning the Air Intake/Ventilation Slots” on Page E-49 for information about the cleaning steps for the venti-
lation inlets and outlets.
• Avoidingmalfunctionsandaccidents
• AdjusttheAdjustablefeettokeeptheprojectorhorizontally.
Using the projector in a tilted status may cause injury if it rolls over. Refer to
“Adjusting the Tilt” on page E-24 for the adjusting procedure.

E-6
Safety Precautions
• Donotdothefollowings
• Donotputanythingheavyontheprojector.
• Donotstepontheprojector,rack,orstand.Donotholdorhangontheprojector.
Doing so could cause the projector to roll over or break, resulting in injury.
Especially be careful if small children are near.
• Donotusetherackunlessthecastersarelockedwhenplacingtheprojectoronarackwithcasters.
Doing so may cause the projector to move or roll over, resulting in injury.
• Donotturnthelampon/offwithinoneminuteafteritisturnedoff/on.Extremelyhighvoltageisgeneratedinthelampjust
after it is turned on. Turning the lamp on/off too frequently could cause the lamp to deteriorate or break, resulting in mal-
functions of the projector.
• Donotprojectanimagewiththelenscapattached.
• Donotusewiththeairlterremoved.Doingsocouldcausedamageormalfunction.
• Donotlifttheprojectorbygraspingthefocusadjustmentring.Doingsowillcauseafaultordamage.
• Afterdisconnectingthepowercablefromtheprojector,allowanintervalofatleast5secondsbeforeinsertingitagain.
• Movingtheprojector
Theunitismeanttobeusedinastationaryposition.
• Besurecarefuloftheglasssurfaceatmovingtheprojectorwhileholdingthehandles.
• Ifthedocumentcoverisnotinsertedenough,itmaygetlooseandfalloffwhileyoucarryit.
• Avoidswingingitaroundortreatingitroughly.
• Careofthepowercableandplug
• Donotputthepowercablenearaheater.
Doing so could cause the sheath of the cable to melt down, resulting in re or electric shock.
• Donotconnectordisconnectthepowercablewithwethands.Doingsocouldcauseelectricshock.
• Besuretoestablishagroundconnection.Thegroundconnectionmustbemadebeforepluggingthepowercableintothe
outlet.
Connect or insert the ground wire to a ground terminal only; do not connect it elsewhere.
• Besuretopulloutthepowercableanddisconnectanycableconnectionsbetweenunitsandreleasetheanti-theftlock
before moving the projector.
Moving the projector with cables connected may cause re or electric shock if the cables are damaged.
• DONOTREMOVEANYSCREWSexceptthelampcoverscrewandtwolampunitscrews.Otherwiseyoucouldreceive
anelectricshock.
• Abouttheprojectionlampandotheropticalparts
Opticalpartssuchasthelightsourcelamp,fan,andcolorwheelarepartsthatrequireperiodicreplacement(i.e.,periodic
replacementparts).
 Whentheprojectorisusedcontinuouslyforlongperiods(of5ormorehoursdaily),thereplacementofthosepartsmay
even become necessary in less than one year of use.
Note also that use of the projector in places where there is tobacco smoke or a lot of dust may shorten the replacement
cycle of the periodic replacement parts. Please inquire with the dealer for details.
• Keepyourfaceawayfromtheexhaustvents.
• If the lamp is broken, dust may enter your eyes or mouth. Be sure to keep your face away from the exhaust vents.
Otherwise, it may result injury.
 (Ifforeignmattersentertheeyes,consultanophthalmologist.)

E-7
Table of Contents
Safety Precautions................................................................E-3
Table of Contents..................................................................E-7
A Check of the Supplied Items and the Names of the Parts ..E-9
Supplied Parts Check......................................................................................................E-9
Names and Functions of the Parts (Projector) ..............................................................E-10
Names and Functions of the Parts (Input Connectors) .................................................E-12
Names and Functions of the Parts (Operation Panel)...................................................E-13
Names and Functions of the Parts (Remote Control) ...................................................E-14
Operation of the Remote Control ..................................................................................E-15
Battery Replacement ....................................................................................................E-15
Procedure Up to Projection.................................................E-16
Projection Distance and Screen Size ..................................E-17
Connections with the Personal Computer...........................E-18
Basic Connections ........................................................................................................E-18
Connections with Personal Computers .........................................................................E-18
Personal Computer Input Connector.............................................................................E-19
When the Image of the Personal Computer Screen Is Not Projected...........................E-20
Table of Supported Input Signals ..................................................................................E-21
Connections with Video Equipment ....................................E-22
Connection of the Power Cable and On/Off Switching ........E-23
Switch On the Power.....................................................................................................E-23
Switch Off the Power.....................................................................................................E-23
Adjustment of the Projection Image....................................E-24
Adjusting the Projection Image .....................................................................................E-24
Making Focus/Zoom Adjustments.................................................................................E-24
Adjusting the Tilt (Slant) ................................................................................................E-24
Regular Operation...............................................................E-25
Select the Input .............................................................................................................E-25
Changing the Orientation of the Projection Image ........................................................E-25
Enlarging and Reducing the Projection Image..............................................................E-26
Adjusting the Brightness ...............................................................................................E-27
Capturing the Projection Image ....................................................................................E-28
/ Still Image Display.......................................................................................................E-28
Conducting a presentation using USB memory stick images .......................................E-29
Adjusting the Volume.....................................................................................................E-31
Displaying the Pointer ...................................................................................................E-32
Deleting the Projection Image and Audio......................................................................E-32
Method of OHP Operation ...................................................E-33
Attaching the Document Cover .....................................................................................E-33
Preparation of the Projection Document .......................................................................E-33
Reading Size of Projection Documents.........................................................................E-33

E-8
Menu Configuration ............................................................E-34
Menu Operation Method .....................................................E-35
Names and Functions of the Buttons Used in Menu Operation....................................E-35
Names and Functions of the Menu Parts......................................................................E-35
Method of Menu Operation ...........................................................................................E-36
Menu Description ...............................................................E-38
Pointer • Screen ............................................................................................................E-38
History menu.................................................................................................................E-39
Image adjustment..........................................................................................................E-40
Settings .........................................................................................................................E-42
Maintenance .......................................................................E-44
Fault Protection .............................................................................................................E-44
Replacement of the Lamp Unit......................................................................................E-46
Cleaning the Air Intake/Ventilation Slots ......................................................................E-49
Troubleshooting ..................................................................E-50
Repair Service ...................................................................E-51
Specifications .....................................................................E-52
Table of Contents

E-9
ON/STANDBY
LAMP/COVER
TEMP
FREEZE OFF
FREEZE
PORTRAIT
INPUT
Lens cap
Powercable(3m)
Remote control
Coin-typelithiumbattery:CR2025
(Insidetheremotecontrol)
CD-ROM
iP-01User’sManual
iP-01 Important Information USB Memory
* USB memory is the supplied items
only for iP-01UE model.
PCconnectioncable(2m)
Pull out the sheet before use.
Important Information
A Check of the Supplied Items and the Names of the Parts
Supplied Parts Check
Please check that the supplied parts are included.
iP-01U
Projector

E-10
A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Projector)
Remotecontrol
IR sensor
Lenscap
Focusadjustmentring
Turn this to adjust the focus.
See Page E-24.
Projectionlens
The image is projected
from here.
* Be sure to remove the
lens cap before pro-
jecting.
Zoomlever
Turn this to adjust the screen size.
See Page E-24.
Documentcover
The document or printed material to be read is
placed under this cover.
See Page E-33.
Operationpanel
The buttons used for regular
operation are located here. See
Page E-13.
Tiltfoot
This foot is used to adjust the vertical angle of the
projection as well as the left-right balance. Turn-
ing it to the left extends it and turning it to the right
shortens it. See Page E-24.
Exhaustvents
Air is discharged from here.
Lampunitcover
(Underneathprojector)
The projection lamp unit is located inside.
See Page E-46.
ON/STANDBY
LAMP/COVER
TEMP
FREEZE OFF
FREEZE
PORTRAIT
INPUT
Airintake
Air is drawn in from the side.
Inputconnectorpanel
Included are connectors for per-
sonal computer, video, and USB
memory*, etc.
* Only for iP-01UE.
Tiltadjustmentlever
Press here to adjust the tilt foot. See Page E-24.
CAUTION
• Duringunitoperation,donotobstructthefrontofthelens.Duringoperation,stronglightthroughthe
lens is projected. Obstruct the front of the lens causes re or burn.
• Duringprojection,besuretoremovethelenscap.Negligencetoobserveitmaydeformthelenscap.
• Whenalampexplodes,itispossiblethatparticlesofglassandothermaterialmaybereleasedoutside
from the ventilation slots; therefore, do not bring your face close to the ventilation slots, or the air intake.

E-11
A Check of the Supplied Items and the Names of the Parts
Speaker
(monaural)
Theftpreventionlock
Please see the Note below.
Remote control
IR sensor
Powerinputconnector
Plug in the power cable here. See
Page E-23.
NOTE
Abouttheanti-theftlock
The anti-theft lock is compatible with Kensington security cable lock.
Contact the following for more information about the products.
Kensington Computer Products Group
Phone:(650)572-2700
Fax:(650)267-2800
URL:http://www.kensington.com
CAUTION • Whenalampexplodes,itispossiblethatparticlesofglassandothermaterialmaybereleasedoutside
from the ventilation slots; therefore, do not bring your face close to the ventilation slots, or the air intake.
ON/STANDBY
LAMP/COVER
TEMP
FREEZE OFF
FREEZE
PORTRAIT
INPUT
Airintake
Air is drawn in from here.
Handle
Documentreadingarea
The document or printed mate-
rial that you wish to project in
the OHP mode is placed here.
See Page E-33.
7mm
3mm

E-12
A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Input Connectors)
1. Computer/video(Dterminaloutput)videoinputconnector
 Usethisinputterminalforconnectiontoacomputer’sana-
log RGB input connector or a video deck’s D connector
outputusinganRGBconversioncable(soldseparately).
See pages E-18 and 22.
2. Videoinputconnector
 Thisinputconnectorisforusewiththevideo(NTSC/PAL
/SECAM).SeePageE-22.
3. PC/VIDEOaudioinputjack
 This is the audio input jack for PC/Video. (Stereo is sup-
ported)
 TooutputtheaudioofaPC,usea(commerciallyavailable)
stereo mini plug to RCA stereo conversion cable.
See Pages E-16 and 22
NOTE:
Left and right channel sounds will be output from a monau-
ral speaker.
Sound will be output when audio is input regardless of the
PC/VIDEO mode setting. (Sound will not be output in the
OHPmode.)
4. USBconnector
This connector is for the insertion of a USB memory stick.
* Only for iP-01UE.
1 2 34
USB memory stick insertion and removal
InsertingaUSBmemorystick
Insert straight and all the way into the USB connector.
* Insert a USB memory stick only; nothing else.
RemovingaUSBmemorystick
* Pull out the USB memory stick after changing the input to a setting
other than OHP.
NOTE
Our optional USB memory stick is guaranteed to operate.
The other USB memory sticks are not guaranteed to operate.

E-13
A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Operation Panel)
1.ON/STANDBYLED
Lit red during standby and lit green when the projection
lamp is on. See Page E-23.
2.LAMP/COVERLED
Lit green during projection. Lit red when the air filter or
lamp unit cover is not in place.
• Atthetimeoftheprojectionlamplightingoperation,the
LEDashesforabout6secondsandthenlightsgreen.
• Atthetimeofaprojectionlamplightingfailure,theLED
ashesgreen.(Theashingintervalwhentheprojection
lampisoffwillbelongerthanwhentheLEDashesat
othertimes.)
• Whentheprojectionlampisoff,theLEDashesgreen
for 60 seconds and then goes off.
• When the projection lamp has been used in excess of
1,900 hours, the LED ashes red; when use exceeds
2,000 hours the LED is lit a steady red.
See Page E-44.
3.TEMPLED
When the internal temperature has risen excessively, the
LED ashes red for 10 seconds, then is lit a steady red.
See Page E-44.
LED List
LED State
Significance
ON/
STANDBY
LAMP/
COVER TEMP
Off Off Off AC power OFF
Normal
condition
Red Off Off Standby
Green Flashing
green Off
Standby to start of projec-
tion
End of projection to
standby
Green Green Off Projecting
Red Red Off
Lamp cover open Power
has been
switched
OFF
because of
the alarm
Lamp burned out
Lamp usage exceeds
2,000 hours
Red Orange Off Internal problem
Red Off Red Temperature fault
Fan fault
Green Flashing
red Off Lamp usage exceeds
1,900 hours Alarm
sounding
Green Green Flashing
red
Abnormal temperature
warning
4. ON/STANDBYButton
 Switches the power of the projector on or off (standby
mode).
• Onlythisbuttoniseffectivewhentheprojectionlampisoff.
See Page E-23.
5. INPUTButton
Press this to switch the input.
 The input switches as follows: OHP →PC →VIDEO or
OHP →VIDEO(D4)→VIDEO.
See page E-25.
6. PORTRAITButton
 When OHP is selected: Changes the orientation of the
projectionimageto0°andto90°.Screensthathavebeen
switched over are displayed to match the width.
7.FREEZEOFFButton
Cancels the still image mode.
Cancels the still image mode.
This is used when checking the projection screen while
moving the document.
See Page E-29.
8. FREEZE/CAPTUREButton
Makes the projection screen image into a still image.
 When OHP is selected: Information will be saved to the
USB memory when the USB memory stick is inserted.
* When the USB memory stick is not inserted, the image
cannot be stored because only still images are dis-
played.
* Only for iP-01UE.
See Page E-28.
ON/STANDBY
LAMP/COVER
TEMP
FREEZE OFF
FREEZE/CAPTURE
PORTRAIT
INPUT
1 2
345 6 7 8

E-14
A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Remote Control)
1. ON/STANDBYButton
 Switches the power of the projector on or off (standby
mode).
• Onlythisbuttoniseffectivewhentheprojectionlampisoff.
See Page E-23.
2. MUTEButton
Temporarily blanks the projection screen without switching
off the lamp. One more press causes the screen to return
immediately.
See Page E-32.
3. VOLUMEButtons
These buttons adjust the volume when the PC or video is
selected.
In addition, during the display of one history image, VOL-
UME + button advances the page, and the VOLUME – but-
ton moves back one page.
See Page E-31.
4. BRIGHTNESSButtons
These buttons adjust the brightness of the projection
screen.
See Page E-27.
5. ZOOMButtons
These buttons adjust the magnification of the projection
screen.
See Page E-26.
6. MENUButton
Switches on or off the display of the menu screen.
See Page E-35.
7. SCROLLButtons
Sets the selection of the item or the adjustment value at the
menu screen. Moves the zoom position during a zoom dis-
play. Moves the pointer when the pointer is being displayed.
See Pages E-26, 27, 29 and 32.
8. SET/POINTERButton
During menu display, this button advances the menu to
the next level. This button nalizes the setting at the time
of item selection. See Page E-34. This button displays a
pointer when the menu screen is not displayed. Press this
button one more time to make the pointer disappear.
9.ROTATIONButton
When OHP is selected, the orientation of the projection
screenswitchesto0°andto90°.Screensthathavebeen
switched over are displayed to match the width.
See page E-25.
10.FREEZE/CAPTUREButton
Makes the projection screen image into a still image.
 WhenOHPisselected:DatawillbesavedtoUSBmemory
when a USB memory stick is inserted.
* When the USB memory stick is not inserted, the image
cannot be stored because only still images are dis-
played.
* Only for iP-01UE.
See Page E-28.
11.FREEZEOFFButton
Cancels the still image mode.
This is used when checking the projection screen while
moving the document.
See Page E-29.
12.OHPButton
Switches the projector to OHP input. See Page E-25.
13.PCButton
Switches the projector to PC input. See Page E-25.
14.VIDEOButton
Switches the projector to video input. See Page E-25.
15.THUMBNAILButton
Still images that have been captured on a USB memory
stick are displayed as thumbnails.
See Page E-29.
* Only for iP-01UE.
1
3
4
6
11
12
13
14
5
2
9
10
15
7
8

E-15
A Check of the Supplied Items and the Names of the Parts
Operation of the Remote Control
• Pleaseusetheremotecontrolwithinarangeofabout7mfromtheremotecontrolIRsensoroftheprojector(locatedatboth
thefrontandrear)andwithinanangleof10degreestotheleftand10degreestotheright.Notethatthisdistancemaybe
shorter depending on battery consumption.
• TheremotecontrolwillnotfunctionwhenthereisanobstaclelocatedbetweentheremotecontrolandtheremotecontrolIR
sensor of the projector.
Battery Replacement
1
Insert the battery with the + side facing up as illus-
tratedontheinsideofthecase.
Firmly hold the remote control with your hand and
insertthetipofaballpointpenorsomeotherpointed
objectintotheholeontherearside.
Notethatthereistheriskofscratchingthecasewhen
usingapointeditemsuchasanawl.
Slidethe batteryholdertoward youbypressingfrom
abovewiththepointeditem,thenremovetheholder.
2
3
Returnthebatteryholdertoitsoriginalstate.
4
BeforeUsingtheProjector
An insulation sheet has been inserted for protection during transportation prior
to shipping. Please pull out and remove the sheet before use.
Insulation sheet
NOTE:When it is time to replace the battery, please purchase a CR2025 coin-type lithium battery. The use of batteries having a
different shape such as the CR2032 may make removal difficult.
CAUTION
HandlingoftheRemoteControl
• Donotsubjecttheremotecontroltoastrongshocksuchasdroppingitfromatable.Doingsocould
damage it and render it inoperable.
• Donotexposeittowaterorotherliquid.Iftheremotecontrolbecomeswet,wipeitdryimmediately.
• Avoidexposuretoheatandsteam.Removethecoin-typelithiumbatterywhentheremotecontrolwill
not be used for an extended period.
• Donotdisassembleorheatthecoin-typelithiumbattery,northrowitintoare.
• Pleasefollowthedisposalmethodofyourregionindisposingoftheusedcoin-typelithiumbattery.
• Theremote controlmayfailtooperateor performance mayworsenwhenitisused near an inverter
typeuorescentlamp.
• Pleasestorethecoin-typelithiumbatteryinaplacethatisoutofthereachofchildren.Ifthebatteryis
swallowed, promptly seek the care of a doctor.
• Pleasehandletheremotecontrolwithcare,sincetherearesomeoperationsavailableonlywithit.

E-16
0 - 6°
Procedure Up to Projection
1Considerationofplacementlocationandscreensize
Determine the screen and projector setup location.
Set the projector on a strong and stable, level platform.
2Connectionswithinputequipment
Connect your personal computer/video equipment.
Connections with the Personal Computer →See Page E-18
Connections with the Video Equipment →See Page E-22
3Connectthepowercableandswitchonthepower
Switch On the Power →See Page E-23
Switch Off the Power →See Page E-23
4Switchonthepowerofthepersonalcomputerorvideoequipment
5Properly adjust the projection image
tothescreen
→See Page E-17
6Selecttheinputequipment
→See Page E-25
7Adjusttheimageorvideo
Adjust the image to provide the optimum condition, as required.
→See Page E-42 - E-43
See Page E-17 for information about the projection distance and screen size.
Performthetiltadjustmentoftheprojectortoprovidethedesiredprojectionheight.
The tilt adjustment allows the position of the projection image to be raised and lowered. The adjustment angle is from 0 de-
grees to 6 degrees.
Tilt adjustment →See Page E-24
0 - 6°

E-17
Please use the following diagrams to determine the screen display size and the type of screen required for any
given projector location.
Projection distances that will be in focus will be 0.67 m (2.2 feet) to 6.1 m (20.0 feet) from the front of the lens.
Please arrange the setup within this range.
Projection Distance and Screen Size
Wide: The size of the projection image
becomes maximum with the pro-
jection image size adjustment us-
ing the zoom lens
Tele: The size of the projection image
becomes minimum with the pro-
jection image size adjustment us-
ing the zoom lens
B
A
ScreenSize
When the zoom lever is at maximum on the telephoto side
When the zoom lever is at maximum on the wide side
200inches(approximately4.0x3.0m)
300inches(approximately6.0x4.5m)
100inches(approximately2.0x1.5m)
80inches(approximately1.6x1.2m)
60inches(approximately1.2x0.9m)
ProjectionDistanceTable
Screen size
(inches)op-
posite angle
Screen Size
A:Projectiondistance(m) B:Heightof
projection bot-
tomedge(mm)
Height(mm)
Wide Telephoto
300 6.0×4.5m 6.1 − 661 4572
200 4.0×3.0m 4.1 4.9 441 3048
100 2.0×1.5m 2.0 2.4 220 1524
80 1.6×1.2m 1.6 1.9 176 1219
60 1.2×0.9m 1.2 1.5 132 914
40 0.8 1.0 88 609.6
CAUTION
SetupLocation
• Donotplacetheprojectorinlocationsthatwillreachhightemperaturesorlowtemperatures.
 Operationambienttemperature:0°C(32°F)to35°C(95°F)
• Setthescreensothatitisnotexposedtodirectsunlightorthelightofdirectillumination.Whenlighthitsthe
screen, the screen show a white cast and will be difficult to watch.
In a bright room, the curtains should be drawn or blinds closed and the area around the screen kept dark.
• Donotsetuptheprojectorinlocationsexposedtodampness,dust,greasysmokeortobaccosmoke.
Doing so will result in the adhesion of dirt to lenses, mirrors, and other optical parts and cause a degradation
of image quality.
• Donotplacetheprojectorinalocationwheretheventilationventswillbeblockedorinclosedareashaving
poorventilation.Doingsowillcausethetemperaturetoriseandcouldcauseareoraccident.(Theexhaust
ventsareatthefrontoftheprojectorandtheairintakeventsarelocatedattheside.)
• Donotplacetheprojectoratalocationwhereitmaybeproppeduporswayed.
• Duringunitoperation,donotobstructthefrontofthelens.Duringoperation,stronglightisprojectedthrough
the lens and if the front of the lens is obstructed by a matter or hand, it may cause re or burn.
• Duringprojection,besuretoremovethelenscap.Thelenscapmaybedeformed.
• Pleasedonotsettheprojectoronatableordeskmatmadeofaheat-sensitivematerial.Tablemaybedis-
colored or desk mat may be deformed.

E-18
CAUTION
ConnectionPrecautions
• Toprotectthisprojectorandtheequipmenttobeconnected,switchoffthepowerofeachunitbefore
making connections.
• Please read the various equipment instruction manuals for information about the connection of the
equipment and the method of use.
• WhenconnectionismadewithanotebookcomputerandtheimageisdisplayedontheLCDscreenof
the notebook computer, a proper display might not be obtained on projection screen. Switching off the
display of the notebook computer will result in a proper display. The method of switching off the display
of the notebook computer will differ depending on the PC manufacturer. Please read the instruction
manual of the notebook computer for details.
• Connection might not be possibly depending on the model and settings of the personal computer.
Please contact your dealer of purchase for further information.
• TheimageofthePCcannotbeprojectedwhiletheUSBcableisconnected.ConnectthePCconnec-
tion cable.
Connections with the Personal Computer
Basic Connections
Connections with Personal Computers
NOTE:
• AfterconnectingthePCconnectioncable,settheexternaloutputandthecomputer’sscreendisplaysettingsonthecomputer.
• Whenthesettingsoftheexternaloutputhavenotbeenmade,"Nosignalbeinginput"willbedisplayed.
• Whenaconditioninwhichasignalhasnotbeeninputcontinuesfor15minutesorlonger,thelampisturnedoffautomatically.
 (Thisonlyfunctionswhentheautopoweroffmodeissetto“ON”.SeepageE-43.)
To the RGB out-
put connector
of the personal
computer
To the audio output
connector of the
personal computer
Plug in the connection cable
and fasten with the screws
NOTE:
• InputConnectors→See Page E-10.
PCconnectioncable(Supplieditem)*
Stereo mini plug - to - RCA audio cable
(Commerciallyavailable)

E-19
Personal Computer Input Connector
Personal Computer Input Connector
The personal computer input connector uses a 15-pin mini D-SUB type connector.
The pins and their corresponding signal inputs are described below.
54321
10 9876
15 14 13 12 11
Connections with the Personal Computer
⑥GND
⑦GND
⑧GND
⑨NC
⑩GND
⑪NC
⑫ SDA(DDC2B)
⑬H.SYNC
⑭V.SYNC
⑮ SCL(DDC2B)
①RED VIDEO
②GREEN VIDEO
③BLUE VIDEO
④GND
⑤NC
Connecting Macintosh Computers
• WhenthemonitoroutputissettotheVGAport(miniD-SUB15-pin),mountthePCconnectioncableincludedwiththemainunit.
• AnoptionalApplevideoadaptercableisrequiredwhenthemonitoroutputisavideoportorDVIport.
NOTE:TheRGB(15-pin)inputconnectoroftheprojectorisoftheanalogtype.Thiscannotbeconnectedwithadigitaloutput
type of personal computer.

E-20
Connections with the Personal Computer
Please check the matters described below when the image of the personal computer is not projected or when there
is projection but the image is not correct.
●The image is not projected
WhentheexternaloutputsignalfromthepersonalcomputerisnotinputtotheiP-01,"Nocomputersignalbeinginput"isdis-
played on the display screen of the iP-01. Should this occur, please check the following matters.
1 Tryrestartingthepersonalcomputer.
When the iP-01 is connected after the personal computer has been started, the connection of the iP-01 might not be recog-
nized by the personal computer. When the iP-01 has not been recognized, the external output signal from the personal com-
puter will not be output and there will not be an image to project.
2 Checkthefunctionsofthepersonalcomputer.
Depending on the notebook computer, some computers will require an operation to output a signal from the external output
connector. If this operation is not performed, the external output signal from the notebook computer will not be output.
Please see the instruction manual of the notebook computer you are using and perform the operation that will output the sig-
nal from the external output connector.
(OperationExample)
IBMPC/ATandDOS/Vcomputers:
Pressthe[Fn]key+"anyoneofthe[F1]to[F12]keys(notingthattheoperationwilldifferdependingonthemodel)"
PC98notebookcomputerslaterthantheNrSeries(withtheexceptionofthePC-98NX):
Pressthe"SuspendResume"switch.
Correspondence List for Connection Problems with the Personal
Manufacturer ExternalOutputSwitchingMethod Manufacturer ExternalOutputSwitchingMethod
IBM Fn+f7 DELL Fn+f8
NEC
Parallel output Toshiba Fn+f5
Switching from the Task Bar Panasonic Fn+f3
Fn+f3 Fujitsu Fn+f10
HP(FormerlyCOMPAQ) Fn+f4 Mitsubishi Fn+f5
Sharp Fn+f5 Apple
Check mirroring with System envi-
ronment setting →Display →Adjust-
ment tab
SONY Fn+f7
When the Image of the Personal Computer Screen Is Not Projected
●
The screen of the personal computer is correct, but the image is not projected properly
Pleasecheckthefunctionsofthepersonalcomputer.
Even though the LCD screen of the notebook computer is properly displayed, the projected image might not be projected
properly. Due to restrictions of the notebook computer there will rarely be instances in which the setting of a simultaneous
display(i.e.,simultaneousoutputoftheexternaloutputsignalwhiledisplayingthescreenofthepersonalcomputer)willre-
sult in a signal that greatly deviates from the range supported by the iP-01 and proper projection will not be possible.
Should this occur, a proper image will not be obtained even when adjustments are made with the iP-01.
In some instances, the personal computer screen will be properly projected by the iP-01 when the simultaneous display is
cancelled and an operation is performed to output only the external output signal. Please see the instruction manual of the
notebook computer you are using for details.
* This table indicates the results of an independent investigation by us of representative computers made
by various manufacturers; it does not include all of the connections.
* Company names and product names mentioned are the trade marks or registered trademarks of the
respective companies.