AVOCOR E-40 Series User manual

E-40 Series
AVE-5540 / AVE-6540 / AVE-7540 / AVE-8640
Quick Start Guide

Your Avocor E-40 series 4K interactive touch display
supports 4K@60Hz resolution, up to 20 simultaneous
touch points, multiple source inputs for your computers
and peripheral devices, and the intuitive Avocor UiQ
on-screen display (OSD) menu.
This Quick Start Guide will provide basic operating
instructions to help get you started.
Welcome to your new Avocor E-40 Series display

Welcome to Avocor UiQ
Avocor’s UiQ is the smart touch enabled dynamic user
interface, with source preview and menu settings, that allows
for remote control free usage.

Time, Date and Week
Temperature C / F
Room Name & Settings
Wi-Fi connection
Source Preview & Selection

Select the gear icon to access
the settings menu

There are seven categorical tiles to choose from
in the Settings menu: Display, Network,
Language, Location & Time, Input, Security, and
About.
Touch one of these tiles to open a subset of
configuration options for your chosen Settings
category.
Please visit www.avocor.com/support to
download the full E-40 Series user manual.`

•Name -Assign a name to the display.
•Wallpaper -Set a default or custom user
images for the Home Screen.
•Energy Saving -Set Auto Power On/Off,
Power On Time, Power Off Time, Eco Mode,
OPS Always On, Display Sleep.
•Picture - Set the Scheme, Backlight, and
Advanced Settings for the display's picture.
•Audio -Set Mute, Treble, and Bass.
•Auto Close –Toggle for UiQ Settings to
Auto Close .

•Status -Shows Network & LAN status.
•LAN -Set a Static IP or DHCP.
•Wi-Fi -Configure Wi-Fi settings.
•Wake On LAN -Toggle Wake On LAN.

Configure Wi-Fi settings
•To enable the Wi-Fi connection, insert the
Avocor AVC-USB-WIFI dongle into the
display, you will then be presented with a
list of available networks to choose from.
•Now select your network and type in your
password.
Please speak to your Avocor representative for
availability and pricing of the AVC-USB-WIFI
dongle

•Timezone -Set Timezone based on your city
and region.
•Auto Date & Time -Toggle Auto Date &
Time to on/off. When connected to the
internet, this allows to automatically change
time and date without configuration
•Use 24 Hour Time -Toggle 24 Hour Time
on/off.
•Date Format -Set a date format for the
Home Screen.
•Location (Weather) -Set the region for
accurate weather information.
•Unit (Weather) -Set unit for measure of
temperature (°F, °C)

•Favorite Source -Set the favorite source so
when the Home button is pressed it will
switch to the favorite source (Home Screen,
OPS PC, HDMI Front, HDMI 1, HDMI 2,
DisplayPort, Type C).
•Starting Source -Set the default source the
display will show automatically upon
powering on the display (Home Screen, OPS
PC, HDMI Front, HDMI 1, HDMI 2,
DisplayPort, Type C).
•Auto Detect New Input -Toggle Auto
Detect New Input; determines whether the
display will automatically switch to a new
connection.
•Rename Sources -Set custom names for the
display's input sources.
•Advanced Settings

•Require Passkey -Toggle Require Passkey
on/off.
•Set Passkey -Set a custom Passkey to
access display settings.

1
The Display at a Glance front
1Guest Inputs 2Speakers 3Front Buttons 4Pen Tray
2324

1
The Display at a Glance rear
1Power Socket 2Power Switch 3OPS PC Slot 4Rear Ports
2
4
3

No. Control Buttons Description
1Power LED State
Red: Display is in stand-by mode (backlight is off)
Green: Display is on (backlight is on)
Red/Green alternating: When display is shutting down
Red/Green alternating: When Freeze or Blank is enabled
2Ambient Light Sensor Measures visible ambient light
3Power Press the button a notification will appear asking to turn off.
Press the button again to confirm turn off the display
4Source Source switching and preview.
5Menu Displays menu options.
6Home Access to the UiQ Home screen
7Volume -Short press to reduce one level of volume;
Long press, continue to reduce the volume
8Volume + Short press to increase one level of volume;
Long press, continue to increase the volume
9Freeze
Push "Freeze" once the infrared touch is closed and the screen is
frozen. There is a Freeze symbol on the upper right.
Release mode: press the front “Freeze“ button to release, or press the
“Freeze” on the remote control to release.
Note: only physical keys (front, remote control) can be activated and cancelled
10 Blank Turn off the backlight (listening only)
Front Control Buttons and their Functions
1 2 3 4 56 7 8 9 10

Display Input Sources

Remote Control & Functions
POWER Power on/off the display
OPS Navigate to the OPS input
BLANK Blanks the display. Press again
to restore.
FREEZE
Freezes the display. Press again
to restore.
OK/Direction keys Menu navigation and selection
RETURN Go back to the previous menu
HOME Navigate to the UiQ
home screen
MENU Open the OSD menu
Brightness -Decreases the Brightness
Brightness + Increases the Brightness
MUTE Toggle Mute on/off
VOL. -Decreases the volume
VOL. + Increases the volume
SOURCE
Open the
Source selection menu
SETTING Open display Settings
FRONT HDMI Switch to the HDMI Front input
source
DP Switch to the DisplayPort input
source
HDMI 1 Switch to the HDMI 1 input
source
HDMI 2 Switch to the HDMI 2 input
source
Type-C Switch to the Type C Input
source

Switching on
1. Plug the end of the supplied power cord into side of the display
2. Connect the other end to the power source.
3. Turn on the main power switch at the side of the display. The power LED
indicator light up Red to indicate that the display is in “standby” mode.
4. Press the Power button and the power LED indicator on the display will then
light up in green, which tells you that the screen is switched on.
5. After a brief warm-up period, the Avocor UiQ interface will be displayed
Switching off
1. Switch the display off by pressing the power button on the display.
2. By pressing the button a notification will appear
•Please turn off PC before shutting down.
•To shut down completely, press power again.
3. By pressing power again, the display will then cycle and shut down.
4. The LED indicator on the display will switch from Green to Red, which tells
you that the screen is in standby mode.
Switching the Avocor display on and off

Proceed as follows to connect the display to your video sources, external
controller.
When connecting your equipment:
1. Turn off all equipment before making any connections.
2. Use the correct signal cables for each source.
3. For best performance and to minimise cable clutter, use high-quality cables
that are only as long as necessary to connect two devices. (Don't use a cable
longer than 5 metres).
4. Ensure that the cables are securely connected.
Connecting the Display

The single Type C cable solution that immediately and intelligently connects a
Windows PC to the display and enables immediate control of camera and mic for
video and audio, as well as provides hard-wire ethernet connection, power and USB
touch-back to the laptop.
1. Connect the enclosed Type C cable to the Type C port of the touchscreen and
to the external PC.
2. Using the Avocor UiQ interface or Remote Control select the Type C source
button or press the Source Button (see operating buttons) on the Front
Connection bar to select Type C.
In order for Plug and Play to work correctly, you must turn on the display before you turn on
the connected computer.
For Type C connection, we recommend using the 1.8 m passive Type C cable provided.
Anything over 1.8m please use an active Type C cable.
Connecting to an external PC using Type C connection