Avonic CM63-IP User manual

Avonic
CM63-IP
Full HD Video IP Camera with PoE
User Manual
Version 2.5
Update notes:
•RC settings
Join Avonic
linkedin.com/company/avonic
twitter.com/avonic

www.avonic.eu
2
•SDI definition
facebook.com/avonic
Contents
Contents ................................................................................2
Introduction............................................................................6
Congratulations ................................................................................................................................... 6
Safety Notes ....................................................................................................................................... 6
Package contents .................................................................7
Accessories ...........................................................................7
Product Overview..................................................................9
Features............................................................................................................................................... 9
Main Unit........................................................................................................................................... 10
Input and Output Description ............................................................................................... 10
IR Remote Controller ....................................................................................................................... 12
Remote Control Shortcuts..................................................................................................... 14
Remote Control IR channel Settings................................................................................... 15
Installation ...........................................................................16
Connection Diagram......................................................................................................................... 16
System Select Switch ...................................................................................................................... 16

www.avonic.eu
3
Power adapter................................................................................................................................... 17
RS232 Interface................................................................................................................................ 18
RS232 network connection diagram............................................................................................... 18
RS485 network connection diagram............................................................................................... 19
Operation.............................................................................21
OSD Menu ........................................................................................................................................ 21
1. MENU................................................................................................................................. 23
2. EXPOSURE ....................................................................................................................... 24
3. COLOR............................................................................................................................... 26
4. IMAGE................................................................................................................................ 27
5. P/T/Z................................................................................................................................... 28
6. NOISE REDUCTION......................................................................................................... 29
7. SETUP ............................................................................................................................... 30
8. COMMUNICATION SETUP.............................................................................................. 31
9. RESTORE DEFAULT ....................................................................................................... 32
Serial Communication Control......................................................................................................... 32
COM port settings ................................................................................................................. 32
Command List................................................................................................................................... 33
Network Function.............................................................................................................................. 34
Operating Environment .......................................................................................................... 34
Equipment Installation............................................................................................................ 34

www.avonic.eu
4
LAN Access and Control ...................................................................................................... 35
Visit/Access IP Camera......................................................................................................... 35
TCP/UDP Control................................................................................................................... 36
WebGUI Homepage ......................................................................................................................... 37
Menu ....................................................................................................................................... 37
Video ....................................................................................................................................... 40
Image Setup ........................................................................................................................... 42
Audio Setup............................................................................................................................ 43
System Setting ....................................................................................................................... 44
Network Setting...................................................................................................................... 45
RTSP stream media player .................................................................................................. 48
IP Port parameters ................................................................................................................ 48
Device Information ................................................................................................................. 48
Maintenance ........................................................................50
Camera Maintenance ....................................................................................................................... 50
Unqualified Application ..................................................................................................................... 50
Troubleshooting ...................................................................50
Image ................................................................................................................................................. 50
Control ............................................................................................................................................... 52
Contact ................................................................................52
Appendix A .........................................................................53

www.avonic.eu
5
VISCA Camera Return Command List .......................................................................................... 53
VISCA Camera Control Command List ......................................................................................... 56
VISCA Query Command List .......................................................................................................... 60
Pelco-D Protocol Command List .................................................................................................... 68
Pelco-P Protocol Command List..................................................................................................... 69
VISCA over IP commands .............................................................................................................. 70
Appendix B Quick Start .....................................................79
Appendix C Dimensions .....................................................80

www.avonic.eu
6
Introduction
Congratulations
Thank you for purchasing the Avonic CM63-IP HD PTZ Camera. Before beginning to operate
this device, please read the manual in order to make sure the best performance is obtained.
Save this manual for future reference.
Safety Notes
•Installation and servicing should only be done by Qualified Service Personnel and conform
to all local codes.
•This unit is designed for indoor use only and it must not be installed where exposed to
water or other liquids and moisture.
•Before powering on the device, check the input power voltage carefully.
•Avoid shock and vibration when transporting and installing the device.
•Use wall mount brackets or ceiling mount brackets available at Avonic for safe installation.
•Electronic devices produce heat. Do not block the ventilation slots of the device and
make sure the installation environment is well ventilated to avoid overheating.
•Before cleaning, unplug the power cable. Use a soft, damp cloth to clean the device,
do not use strong or abrasive detergent to clean that will damage the device.
•If you wish to dispose this product, please contact Avonic to obtain info about the take-
back procedure.

www.avonic.eu
7
Package contents
Quantity
Description
Avonic SKU
1 pc
PTZ Camera
CM60-IP
1 pc
Power Supply 12V/A
CM-PSU
1 pc
Remote Control
CM-RC
1 pc
RS232 9-pin female to 8-pin male
CM-RS232
Accessories
Wall mount in White and Black
Avonic SKU : CM-WMW
: CM-WMB
Ceiling mount in White and Black

www.avonic.eu
8
Avonic SKU : CM-CMW
: CM-CMB

www.avonic.eu
9
Product Overview
The Avonic CM-series cameras are designed for fixed installations. Without concessions on
quality, these cameras are an affordable choice for many installations. The cameras are equipped
with a Panasonic CMOS sensor combined with a glass high-quality glass lens with 30x optical
zoom. Control these cameras over RS232/485 with the Avonic CM-CON100 PTZ controller or
any third party controller that supports VISCA, Pelco-P/D protocols.
These high-quality conference video cameras, with resolutions up to 1080p/60 and h.265 encoded
ultra-low bandwidth video streams, have adopted Panasonic’s HD CMOS sensor, which produces
high-quality images. The high SNR (55db) of the CMOS sensor combined with 2D and 3D noise
reduction algorithms, effectively reduce the noise, even under low light conditions. Supports
HDMI, SDI and CVBS output with high effective transmission distances. Using RS232/485
interface or over IP, all the parameters of the camera can be remote-controlled.
Features
•H.265 encoding support, enabling full HD 1080p/60 video stream by ultra-low bandwidth.
•Apply Panasonic's 1/2.7 inch, 2.07 million effective pixels high quality HD CMOS sensor,
•Frame rate up to 60fps in 1080P, optional 120fps output in 720P.
•High SNR of CMOS sensor combined with 2D and 3D noise reduction algorithm,
effectively reduce the noise, even under low illumination conditions, picture can still keep
clean and clear.
•HDMI output
•3G-SDI interface (SMTPE 424M), effective transmission distance up to 100 meters.

www.avonic.eu
10
SMTPE 425M, 8 bit RGB, 4:2:2, level A
•SD CVBS output.
•30x Optical
•Remote Control Using RS232/485 interface, all the parameters of the camera can be
remote controlled by high-speed communications. Remote Control with IP on TCP or
UDP port.
•Freeze Image while switching presets.
Main Unit
Input and Output Description
1. Audio LINE IN Interface
2. CVBS Interface
3. System select switch
4. RS485 interface
5. RS232 IN interface

www.avonic.eu
11
6. RS232 OUT interface
7. Network Interface
8. HDMI Interface
9. 3G-SDI Interface (SMPTE 424M)
10. USB2.0 (update only)
11. DC 12V jack
12. Power switch

www.avonic.eu
12
IR Remote Controller
1. Standby Button
Press this button to enter standby mode.
Press it again to enter normal mode. (Note:
Power consumption in standby mode is
approximately half of the normal mode)
2. Position Buttons
To set preset or call preset
3. *Button
Used with other buttons
4. Set/Preset Buttons
Set preset: Store a preset position
[SET PRESET] + Numeric button (0-9):
Setting a corresponding numeric key preset
position
5. Pan-Tilt control Buttons
Pressing the Pan-Tilt back to the middle position
6. Back buttons
Press the OSD menu return to the superior.
7. Zoom Buttons
Slow Zoom: Zoom In [+] or Zoom Out [-] slowly

www.avonic.eu
13
Fast Zoom: Zoom In [+] or Zoom Out [-] fast
8. 8. Pan-Tilt L/R set
Press with 1 buttons and 2 buttons setting the direction of the Pan-Tilt
L/R Set +1[STD]: set the Pan-Tilt turn the same direction as the L/R Set
L/R Set +2[REV]: set the Pan-Tilt turn the opposite direction as the L/R Set
9. 9. Focus Buttons
Used for focus adjustment.
Press [AUTO] adjust the focuses on the center of the object automatically. To adjust the
focus manually. Press [MANUAL] adjust the focus on the center of the object manual
MANUAL button, and adjust it with [Far] (Focus on far object) and [NEAR] (Focus on
near object)
10. Camera IR channel Select Buttons
Press the button corresponding to the camera you want to operate with the remote
controller.
11. # Button
Used with other buttons
12. Set Camera IR Address Buttons
[*]+[＃]+[F1]: The camera is set to IR channel 1.
[*]+[＃]+[F2]: The camera is set to IR channel 2.
[*]+[＃]+[F3]: The camera is set to IR channel 3.
[*]+[＃]+[F4]: The camera is set to IR channel 4.
13. Clear Preset Buttons

www.avonic.eu
14
Clear preset: Erase a preset position
[CLEAR PRESET] + Numeric button (0-9)
Or: [*]+[#]+[CLEAR PRESET]: Erase all the preset individually
14. Pan/Tilt Control Buttons
Press arrow buttons to perform panning and tilting. Press [HOME] button to face the
camera back to front
15. MENU
MENU: enter or exit OSD MENU
16. BLC (Backlight Compensation) Button
BLC ON/OFF: Press this button to enable the backlight compensation. Press it again to
disable the backlight compensation.(NOTE: Effective only in auto exposure mode)
Note: If a light behind the subject, the subject will become dark. In this case, press the
backlight ON / OFF button. To cancel this function, press the backlight ON / OFF button.
17. Pan/Tilt reset
Preset Pan/Tilt self-test.
Remote Control Shortcuts
[*]+[＃]+[1]: OSD menu default in English
[*]+[＃]+[4]: Show IP address and network settings
[*]+[＃]+[5]: Save OSD
[*]+[＃]+[6]: Quickly recover the default
[*]+[＃]+[8]: Show the camera version

www.avonic.eu
15
[*]+[＃]+[9]: Quickly set up inversion
Remote Control IR channel Settings
[*]+[＃]+[F1]: The camera is set to IR channel 1.
[*]+[＃]+[F2]: The camera is set to IR channel 2.
[*]+[＃]+[F3]: The camera is set to IR channel 3.
[*]+[＃]+[F4]: The camera is set to IR channel 4.

www.avonic.eu
16
Installation
Connection Diagram
System Select Switch
Setting of the system select switch. The option of video format:
VIDEO SYSTEM
0
1080p60
8
720p30

www.avonic.eu
17
1
1080p50
9
720p25
2
1080i60
A
-
3
1080i50
B
-
4
720p60
C
-
5
720p50
D
576i
6
1080p30
E
480i
7
1080p25
F
-
CAUTION:
a. After changing the switch, you need to restart the camera to take effect.
b. 720 p30 and 720 p25 only under the HDMI output.
Power adapter
This equipment is equipped with a 12V/2A DC power supply. Insert the power supply according
to the requirements, turn on the power switch.

www.avonic.eu
18
RS232 Interface
RS232 network connection diagram
This setup is for RS232 serial connection with the VISCA protocol. The Controller is connected
to the RS232-IN of the first camera in the serial circuit. The RS232-OUT of the first camera is
connected to the RS232-IN of the second camera and so on.
In the OSD menu under Communication Setup, the Protocol is Auto / VISCA, and Net mode is
set to Serial.

www.avonic.eu
19
RS485 network connection diagram
The setup for RS485 is a parallel network. To connect multiple cameras by RS485, the cameras
need to get attached to a 2-wire twisted pair bus that is terminated at both ends with a 120 Ω
impedance resistor. The maximum length of the bus is 1200m. The maximum distance from the
bus to the camera or controller is 5 meters. The cameras are connected with the 2-pin Phoenix
connector. In the OSD menu under Communication Setup, Net mode is set to Paral.

www.avonic.eu
20