Avtech H.265 NVR User manual

h517_h8536_d8536_8536l_h8516_h2116_d2116_h1109_d1109_h1004_d1104_manual_V1.3
AVTECH H.265 NVR
SERIES
U er Manual
Plea e read in truction thoroughly before
operation and retain it for future reference.
For the actual di play & operation, plea e
refer to your device in hand.
Free PC CMS
oftware (CMS Lite)

IMPORTANT SAFEGUARD
All lead-
free product offered by the company comply with the requirement of the
European law on the Re triction of Hazardou Sub tance (RoHS) directive, which mean
our manufacture proce e and product are trictly “lead-free” and without the
hazardou
ub tance cited in the directive.
The cro ed-
out wheeled bin mark ymbolize that within the European Union the product
mu t be collected eparately at the product end-of-
life. Thi applie to your product and
any peripheral marked with th
i ymbol. Do not di po e of the e product a un orted
municipal wa te. Contact your local dealer for procedure for recycling thi equipment.
Thi i a cla A product. In a dome tic environment thi product may cau e radio
interference in which ca e the u er may be required to take adequate mea ure .
Federal Communications Commission Interference Statement
Thi equipment ha been te ted and found to comply with the limit for a Cla A digital device, pur uant to
Part 15 of the FCC Rule . The e limit are de igned to provide rea onable protection again t harmful
interference when the equipment i operated in a commercial environment. Thi equipment generate , u e ,
and can radiate radio frequency energy and, if not in talled and u ed in accordance with the in truction
manual, may cau e harmful interference to radio communication . Operation of thi equipment in a re idential
area i likely to cau e harmful interference in which ca e the u er will be required to correct the interference at
hi own expen e.
Thi device complie with Part 15 of the FCC Rule . Operation i ubject to the following two condition :
(1) Thi device mat not cau e harmful interference, and
(2) Thi device mu t accept any interference received, including interference that may cau e unde ired
operation.
Disclaimer
iPad and iPhone are trademark of Apple Inc., regi tered in the U.S. and other countrie . App Store i a
ervice mark of Apple Inc.
IOS i a trademark or regi tered trademark of Ci co in the U.S. and other countrie and i u ed under licen e.
Google Play and Android are trademark of Google Inc
We re erve the right to revi e or remove any content in thi manual at any time. We do not warrant or a ume
any legal liability or re pon ibility for the accuracy, completene , or u efulne of thi manual. The content of
thi manual i ubject to change without notice.
Thi product doe n’t have a tandby / off mode.

MPEG4 Licensing
THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING
MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY
MPEG LA TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL
AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM.
GPL Licensing
Thi product contain code which are developed by Third-Party-
Companie and which
are ubject to the GNU General Public Licen e (“GPL”) or the GNU Le er Public
Licen e (“LGPL”).
The GPL Code u ed in thi product i relea ed without warranty and i ubject to the
copyright of the corre ponding author.
Further ource code which are ubject to the GPL-licen e are available upon reque t.
We are plea ed to provide our modification to the Linux Kernel, a well a a few new
command a reque ted ([e-mail]), and ome tool to get you into
the code.

TABLE OF CONTENTS
1. HARDWARE OVERVIEW ................................................................................................................... 1
1.1 Front Panel............................................................................................................................................. 1
1.2 Rear Panel.............................................................................................................................................. 2
2. CONNECTION.................................................................................................................................... 3
2.1 Hard Di k In tallation.............................................................................................................................. 3
2.2 Connection ............................................................................................................................................. 8
2.3 Camera IP Configuration by LAN .......................................................................................................... 9
3. FOR INITIAL USE ..............................................................................................................................11
3.1 Setup Wizard ........................................................................................................................................ 11
3.2 Mount Hard Di k................................................................................................................................... 13
3.3 Change U er Name and Pa word....................................................................................................... 13
4. USER INTERFACE........................................................................................................................... 15
4.1 Local Acce ......................................................................................................................................... 15
4.2 Interface Overview................................................................................................................................ 15
4.3 Statu & Operation................................................................................................................................ 16
4.3.1 Device Statu ........................................................................................................................................... 16
4.3.2 Channel Statu ........................................................................................................................................ 16
4.3.3 Main Menu............................................................................................................................................... 17
4.3.4 Playback Panel ........................................................................................................................................ 19
5. FREQUENTLY-USED FUNCTIONS.................................................................................................. 20
5.1 IP Device Search .................................................................................................................................. 20
5.2 U er Account Creation.......................................................................................................................... 21
5.3 PTZ Control .......................................................................................................................................... 22
5.4 Video Backup........................................................................................................................................ 23
5.5 Sy tem Logout...................................................................................................................................... 24
5.6 Hardware Re et.................................................................................................................................... 24
6. MAIN MENU ..................................................................................................................................... 25
6.1 CAMERA .............................................................................................................................................. 25
6.1.1 CONNECTION......................................................................................................................................... 25
6.1.2 DEVICE ................................................................................................................................................... 26
5.1.3 IMAGE..................................................................................................................................................... 27
6.1.4 DETECTION............................................................................................................................................ 27
6.1.5 ALARM OUT............................................................................................................................................ 30
6.2 RECORD.............................................................................................................................................. 30
6.3 SCENARIO........................................................................................................................................... 32
6.3.1 Pre-defined Scenario .............................................................................................................................. 32
6.3.2 Scenario Cu tomization ........................................................................................................................... 34
6.4 IVS........................................................................................................................................................ 38
6.5 EXPORT............................................................................................................................................... 41
6.5.1 BACKUP.................................................................................................................................................. 41
6.5.2 SCHEDULE ............................................................................................................................................. 42
6.5.3 REGULAR REPORT................................................................................................................................ 43
6.6 STORAGE ............................................................................................................................................ 44
6.7 ACCOUNT............................................................................................................................................ 45
6.7.1 USER LIST .............................................................................................................................................. 45
6.7.2 GROUP ................................................................................................................................................... 46

6.8 NETWORK ........................................................................................................................................... 47
6.8.1 E-MAIL .................................................................................................................................................... 47
6.8.2 FTP ......................................................................................................................................................... 48
6.8.3 MULTICASTING ...................................................................................................................................... 48
6.8.4 EaZy........................................................................................................................................................ 49
6.9 TIME..................................................................................................................................................... 49
6.10 DISPLAY............................................................................................................................................. 50
6.11 PERIPHERAL ..................................................................................................................................... 54
6.11.1 LOCAL................................................................................................................................................... 54
6.11.2 JOYSTICK ............................................................................................................................................. 54
6.11.3 ALARM OUT .......................................................................................................................................... 54
6.11.4 LOCAL ALARM IN.................................................................................................................................. 56
6.12 MAINTAIN........................................................................................................................................... 56
6.12.1 SYSTEM................................................................................................................................................ 56
6.12.2 UPGRADE............................................................................................................................................. 57
6.12.3 ALERT ................................................................................................................................................... 58
6.12.4 EVENT LOG .......................................................................................................................................... 58
6.12.5 ONLINE ................................................................................................................................................. 59
6.13 POWER CONTROL............................................................................................................................ 59
6. REMOTE OPERATION..................................................................................................................... 60
6.2 Web Brow er ........................................................................................................................................ 60
6.3 Mobile Device ..................................................................................................................................... 61
6.3.1 Prerequi ite ............................................................................................................................................ 61
6.3.2 Where to download .................................................................................................................................. 61
6.3.3 Setup....................................................................................................................................................... 61
APPENDIX 1 PRODUCT SPECIFICATIONS........................................................................................ 63
APPENDIX 2 PUSH VIDEO CONFIGURATION ................................................................................... 72
A2.1 Alarm Sen or Connection................................................................................................................... 72
A2.2 Configuration...................................................................................................................................... 73
A2.3 Enable Pu h Video............................................................................................................................. 73
A2.3.1 From iOS Mobile Device (iPhone / iPad) ................................................................................................ 73
A2.3.2 From Android Mobile Device .................................................................................................................. 74
APPENDIX 3 COMPATIBLE USB FLASH DRIVE LIST ........................................................................ 75
APPENDIX 4 COMPATIBLE HARD DISK LIST .................................................................................... 76
APPENDIX 5 BATTERY REPLACEMENT ............................................................................................ 77
APPENDIX 6 DISK ARRAY COMPATIBLE LIST................................................................................... 78
APPENDIX 7 EAZY NETWORKING..................................................................................................... 79
A8.1 Via EagleEye on iOS / Android Device .................................................................................................... 79
A8.2 Via Internet Explorer on PC / Laptop......................................................................................................... 84
A8.3 Icon ........................................................................................................................................................ 89

HARDWARE OVERVIEW
1
17
1. HARDWARE OVERVIEW
1.1 Front Panel
Note: The functions on the front panel may vary, depending on the mode you have.
1) Select & Unlock
The e two button are u ed to unmount a hard di k. Pre Select and check the HDD indicator (red &
alway on) to en ure the hard di k you want to unmount i cho en. Then, choo e Unlock to unmount the
hard di k (HDD indicator: red & fla hing).
When the hard di k unmount i completed, the indicator will be off, and you’re ready to remove the hard di k
from the HDD tray.
2) HDD Indicator
Check the HDD indicator for each in talled hard di k to en ure the hard di k work normally.
Note: Some statuses are for selected models only.
Color St tus Me ning
-- No light No hard di k i in talled, or the in talled hard di k i not detected. Plea e in tall a hard di k
or replace the in talled hard di k, and try again.
Green Alway on The in talled hard di k i detected well.
Green Fla hing Data reading / writing.
Red Alway on The hard di k i elected for unmounting.
Red Fla hing The device i mounting or unmounting the elected hard di k.
3) Statu LED indicator
Pre to power on the device; pre and hold for 3 econd to power off the device.
Note: Some indicators are for selected models only.
Thi device i power- upplied.
The device i connected to Internet.
The device i connected to LAN.
An alarm event occur .
Any of the adapter, power or fan i abnormal.
Video playback i on.
eSATA An external di k array i connected.
An USB fla h drive or USB hard di k i connected.
Thi device i in the tandby mode when it’ powered off.
4) Power ( )
Pre to power on the device; pre and hold for 3 econd to power off the device.
5) Mou e port ( )
In ert a mou e for function operation.
6) USB port ( )
In ert a compatible USB fla h drive for video backup.
Note: For the compatible list of USB flash drives, please refer to “APP NDIX 3 COMPATIBL USB FLASH
DRIV LIS” at page 75.

HARDWARE OVERVIEW
2
27
1.2 Rear Panel
Note: The functions on the rear panel may vary, depending on the mode you have.
1) HDMI1
Thi port i u ed to connect the monitor which upport HDMI interface for main monitor output
2) HDMI2
Thi port i u ed to connect a econdary monitor which upport HDMI interface for econdary monitor
output. For detail , plea e refer to “6.10 DISPLAY” at page 50.
3) VGA
Connect to the VGA port of the monitor which upport VGA video output for main di play output.
4) VIDEO OUT
Connect to a CRT monitor for main monitor output.
5) eSATA
Thi port i u ed to connect a torage device upporting eSATA interface; for in tance, an external di k array.
Note: Please purchase a disk array supporting Linux system to ensure your device works properly. For
the compatible list, please refer to “APP NDIX 6 DISK ARRAY COMPATIBL LIS” at page 78.
Note: If the disk array is not connected or detected well, check the mode of your disk array, or do a
reset default on your disk array and try again.
6) WAN
Thi port i u ed to connect your device to Internet.
7) LAN
Thi port i u ed to connect IP camera to thi device with a hub (if nece ary) locally.
8) MIC IN
Connect to a microphone for audio tran mi ion.
9) AUDIO OUT
Connect to a peaker for audio tran mi ion.
10) External I/O Port
The e port are u ed to connect external I/O device , uch a magnetic contact or buzzer , or external
control device , uch a other brand’ peed dome camera or keyboard controller.
11) USB 3.0
In ert a compatible USB fla h drive or USB hard di k for video backup.
Note: For the compatible list of USB flash drives, please refer to “APP NDIX 3 COMPATIBL USB FLASH
DRIV LIS” at page 75.
12) DC IN
Connect to the upplied adapter.
13) Power Switch
Switch to “—” to turn on the power, and “” to turn off the power.

CONNECTION
3
37
2. CONNECTION
2.1 Hard Disk Installation
Note: It’s necessary to install a hard disk first before firmware upgrade to ensure the upgrade process
works properly.
 Type 1
Step1: Remove the top cover, and find the hard di k connector and bracket in the device.
CR2032
Bracket
Hard Di k
Connector
Bracket
Screw
Step2: Get a compatible hard di k. With the PCB ide facing down, in ert the hard di k to one of the hard di k
connector.
Note: To use a green hard disk, use ONLY the hard disk designed especially for surveillance to ensure the
device works properly.
Step3: Fa ten the hard di k to the bracket by ecuring the crew on the bracket.
Note: For the 16CH model which supports five hard disks, please go to “Additional Brackets for Two More
Hard Disks” to know how to install the other two hard disks.
CR2032
Hard Disk
CR2032
Hard
Disk
󴄀
Screws
Secured
Step4: Replace the top cover and fa ten the crew you loo ened in Step1.

CONNECTION
4
47
Additional Brackets for wo More Hard Disks
Step1: For the 16CH model which upport five hard di k , find two pair of HDD tray , SATA cable and power
cable in the ale package.
Step2: Find HDD bracket , power board connector (white) and Sata board connector (black) on the main board.
To in tall a hard di k, three bracket , one power board connector (while) and one Sata board connector (black)
are needed.
Step3: Place the hard di k to the HDD tray and fix it on the tray with the upplied crew .
Step4: Fix the HDD tray to the HDD bracket with the upplied crew .
Step5: Connect the Sata cable and power cable to main board and the hard di k.

CONNECTION
5
57
 Type 2
Step1: Find the HDD tray and it acce orie in the ale package, and place the rubber to the HDD tray a hown
below.
Step2: Get a compatible hard di k. With the PCB ide facing down and the hard di k‘ connector facing the out ide.
Then, place the hard di k in the HDD tray and in ert the latche .
Step3: Remove the front cover by pulling from the left end of the cover a indicated below. You’ll ee eight HDD
bay .
Step4: Pu h the HDD tray with a hard di k in talled to the end of the HDD bay to en ure the hard di k i in erted
properly.
Step5: Replace the front cover removed in Step3 back to the NVR.
Step6: Power on the NVR and wait till the initialization i completed. Check if the HDD indicator on the front panel i
fla hing in red.
Note: Please check “HDD Indicators” in “1.1 Front Panel” for details.
Then, right click the mou e to exit from the full creen mode. Click MENU → STORAGE to ee if all hard
di k you in erted are detected, and click one by one to mount them. Wait till the hard di k i mounted and
the tatu how READY. When you’re prompted to clear the hard di k, choo e YES. For detail , plea e
check “6.6 STORAGE” at page 44.

CONNECTION
6
67
 Type 3
Step1: Remove the top cover, and find where to in tall a hard di k on the recorder.
Step2: Get a compatible hard di k. With the PCB ide facing down, find the crew hole on the recorder ba e, and
place the hard di k in the recorder.
Note: To use a green hard disk, use ONLY the hard disk designed especially for surveillance to ensure the
device works properly.
Hard Dik
Screw hole
Screw hole
Step3: Connect the data bu and power cable for the hard di k.
Step4: Align the crew hole on the ba e and the hard di k. Then, fa ten the hard di k o the ba e with the upplied
crew from the bottom ide of the recorder.
Step5: Replace the top cover and fa ten the crew you loo ened in Step1.
Step6: Remove the protective film on the bottom of the recorder if any to en ure the heat di ipation can work
normally.

CONNECTION
7
77
Add eSA A interface with optional SA A-to-eSA A cable
Step1: Check the pecification of your recorder and ee if it upport thi feature. If ye , find the re erved hole on
the rear panel of your recorder a illu trated below.
Step2: Remove the top cover of the recorder to reveal it main board. Remove the thin piece of metal that block the
re erved hole. Then, remove one SATA cable on the board.
Note: It will consume one SATA port to add an eSATA interface on the mainboard of your recorder, which
means you’ll lose one hard disk which can be installed inside your recorder.
Step3: Get a SATA-to-eSATA cable and connect it to the board a illu trated below.
Note: The SATA-to-eSATA cable is optional and need to purchase separately.

CONNECTION
8
87
2.2 Connection
Connect a monitor, IP camera , adapter , a mou e, and other device nece ary to thi recorder a illu trated
below.
 Type 1
 Type 2
Then, power on the whole y tem and wait till the y tem initialization i done.

CONNECTION
9
97
2.3 Camera IP Configurations by LAN
The auto mode i u ed to implify the complicated network etting within three minute . The connection mode
of the LAN port i AUTO by default. Thi mode i uitable when the LAN port of the device i connected to a
hub / witch.
Note: S TTING Path: MENU  NETWORK  LAN  MODE.
Note: For access this recorder remotely with your mobile device or laptop, you need to connect this
recorder to Internet. For details, please get the network setup manual from
www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
The device will automatically configure the IP addre of a camera connected by LAN if:
 The connected IP camera i our brand’ IP camera.
 The IP configuration method of the camera i DHCP.
 The camera i powered on before the device i powered on.
If the device doesn’t configure the IP addre of your camera automatically a de cribed above, your IP
camera might NO be:
 Our brand’ IP camera.
 Set to DHCP a it default IP configuration method.
To olve thi , reconfigure the IP addre of the camera to 10.1.1.xx (xx range from 11 ~ 253), which i in the
ame network egment a the device.
 For other brand’ IP camera, plea e check it u er manual to know how to change the IP addre
manually.
 For our brand’ IP camera, plea e check the in truction below:
a) Go to MENU  CAMERA  CONNECTION, and elect IP SEARCH at the bottom right corner.
You’ll ee the li t of every connected IP camera with it connection tatu to thi device and MAC
addre .
IP SEARCH
ASSIGN EDIT DEVICE TYPE IP NETMASK GATEWAY PRIMARY DNS PORT MAC VENDOR
 IPCAM 10.2.1.33 255.255.255.0 10.2.1.10 8.8.8.8 88 00:0E:53:31:06:E5 AVTECH
REFRESH ADD
The device will automatically configure the IP addre of a camera connected by LAN if:
 The connected IP camera i our brand’ IP camera.
 Re et the IP camera to default value (the default IP configuration method of the camera i “DHCP”).
 The camera i powered on before the device i powered on.
If the device doesn’t configure the IP addre of your camera automatically a de cribed above, your IP
camera might NO be:
 Our brand’ IP camera.
 Set to “DHCP” a it default IP configuration method.

CONNECTION
10
107
b) To olve thi , u e our brand’ IP camera, and reconfigure it IP addre to 10.1.1.xx (xx range from
11 ~ 253). Select (EDIT), and change the network type from STATIC to DHCP.
Then, Click APPLY to ave your change .
SETUP
NETWORK TYPE DHCP
IP 10.1.1.14
PORT 88
USER NAME A min
PASSWORD *****
NETMASK 255.255.255.0
GATEWAY 10.1.1.10
PRIMARY DNS 8.8.8.8
CANCEL APPLY
c) Check  to a ign the camera to a pecific channel automatically, and choo e ADD.
IP SEARCH
ASSIGN EDIT DEVICE TYPE IP NETMASK GATEWAY PRIMARY DNS PORT MAC VENDOR
 CH1 IPCAM 10.1.1.14 255.255.255.0 10.1.1.10 8.8.8.8 88 00:0E:53:31:06:E5 AVTECH
REFRESH ADD
d) The device will then detect the IP camera and di play image oon.
Note: To configure this recorder to access other IP camera connected remotely for live viewing or video
backup, you need to connect this recorder to Internet first.

FOR INITIAL USE
11
117
3. FOR INITIAL USE
For the fir t time to power on thi device, you might be prompted to:
 Go through the etup wizard
 Clear hard di k
 Change default u er name and pa word
3.1 Setup Wizard
The etup wizard i prompted to guide you fini hing the mo t common etting you might need to do.
Note: It’s okay to skip the wizard. You can configure the following settings later in their respective
menus.
SETUP WIZARD
ENGLISH 
WELCOME TO THE SETUP WIZARD.
PLEASE FOLLOW THE WIZARD TO FINISH BASIC CONFIGURATIONS.
SKIP NEXT
Select NEXT to go to the next tep.
SETUP WIZARD
PLEASE INPUT THIS MACHINE NAME
SKIP PREV NEXT
Name the device. If you don’t want to name the device, ju t kip to the next tep.
Note: To name the device later, please go to MAINTAIN  SYSTEM.
SETUP WIZARD
USER NAME office_h
PASSWORD office145
CONFIRM PASSWORD office145
PLEASE INPUT THE ADMINISTRATOR’S USER NAME AND PASSWORD.
SKIP PREV NEXT
Change the default u er name and pa word. If you don’t change the u er name and pa word here, you’re not
able to go to the next tep. Thi tep i compul ory.
Note: To change or edit user name and passwords, please go to SYSTEM  ACCOUNT  USER LIST.

FOR INITIAL USE
12
127
SETUP WIZARD
DATE 2015/MAR/05
TIME 14:33:46
FORMAT Y/M/D 
GMT GMT+08:00 
SKIP PREV NEXT
Set the date and time.
If you don’t want to et the date and time now, ju t kip to the next tep. However, it’ nece ary to keep the date
and time right to en ure the accuracy of the recorded data.
Note: To set the date and time later, please go to MENU  TIME.
SETUP WIZARD
NTP SERVER Pool.ntp.org
SYNC PERIOD OFF 
SKIP PREV NEXT
Configure if you want to connect thi device to an NTP erver to get the right time online.
Note: To set the date and time later, please go to MENU  TIME.
SETUP WIZARD
NETWORK TYPE STATIC 
IP 192.168.1.10
GATEWAY 192.168.1.1
NETMASK 255.255.255.0
PRIMARY DNS 8.8.8.8
SECONDARY DNS 168.95.1.1
PORT 80
SKIP PREV NEXT
Configure network etup by u ing the traditional method. For detail , plea e download the in truction from
www. urveillance-download.com/u er/network_ etup/network_ etup_recorder.pdf.
Note: To configure network setup by using the traditional method later, please go to MENU 
NETWORK.
SETUP WIZARD
SMTP SERVER Smtp.gmail.com
PORT 465
MAIL FROM [e-mail]
SSL ENCRYPTION ON
VERIFY PASSWORD ON
USER NAME [e-mail]
PASSWORD ●●●●●●
SKIP PREV NEXT
Configure event notification by email.
Note: To configure email notifications later, please go to MENU  NETWORK -> E-MAIL.

FOR INITIAL USE
13
137
SETUP WIZARD
DDNS ON
SYSTEM NAME Eagleeyes 
HOST NAME MAC000E533A3D
E-MAIL
CURRENT HOST ADDRESS
MAC000E533A3D4A. ns.eagleeyes.tw
SKIP PREV NEXT
Enable DDNS if needed.
Note: To enable the DDNS later, please go to MENU  NETWORK  DDNS.
3.2 Mount Hard Disk
When thi device i powered on, you’ll ee the hard di k indicator are fla hing in red, indicating the hard di k
are not detected by thi recorder.
Right click the mou e to exit from the full creen mode. Click MENU → STORAGE to ee the tatu of each
connected hard di k . Click one by one to mount them. When you’re prompted to clear the hard di k, choo e
YES.
When the hard di k i mounted, the tatu will be changed from MOUNTING to READY.
STORAGE
HDD NEARLY FULL (GB) 5
HDD OVERHEAT ALERT (°C) 70
OVERWRITE ON
KEEP DATA LIMIT(DAYS) OFF
TEMPERATURE TO ENABLE FAN 30
REMINDER WHEN FORMATTING HDD OFF
ID TYPE STATUS SIZE TEMP. SERIAL NUMBER FREE SIZE FORMAT TIME HEALTH STATUS
HDD 5-1 NORMAL INACTIVE 750GB -- WD-WCAV53797317 269.856GB 2017/07/18 23:03:52 GOOD
HDD 5-2 NORMAL INACTIVE 1.00TB -- WD-WMC1U5344933 9.88GB 2017/07/18 23:10:55 GOOD
3.3 Change User Name and Password
It’ highly recommended to change the u er name and pa word of thi device to keep your account afe.
Otherwi e, any per on could acce thi device if he know the default u er name and pa word.
If you didn’t go through the etting wizard at the fir t place, you’ll be prompted to change the u er name and
pa word:
WARNING
PLEASE BE ADVISED TO MODIFY THE DEFAULT
ACCOUNT TO ENSURE YOUR INFORMATION SECUIRTY.
 MODIFY
O REMIND ME LATER
O DON’T REMIND ME ANYMORE
CONFIRM
Choo e MODIFY to tart the change immediately.

FOR INITIAL USE
14
147
To change later, go to MENU  ACCOUNT  USER LIST, and choo e to change the default u er
name and pa word of SUPERVISOR.
US R LIST
USER LIST
GROUP EDIT USER NAME GROUP
a min SUPERVISOR

USER INTERFACE
15
157
4. USER INTERFACE
4.1 Local Access
Connect your USB mou e to one of the USB port on the front panel, and move your mou e to enter the pa word
with the pa word keypad. The default u er name and pa word are both admin.
When you log into the y tem, the di play i in the full creen mode. Right click the mou e to how the tool bar and
function panel.
Note: You may also customize a user level to have different access privileges in ACCOUNT  GROUP.
For details, please refer to “6.7.2 GROUP” at page 46.
Password Input
4.2 Interface Overview