AX2V AX-260 User manual

Mode: AX-260
1600P QHD WIRELESS DASH CAM
User Manual

Thank you for choosing this AX2V 2K(1600P) QHD Wi-Fi Car Dash
Camera. Please read the user manual carefully before using the device.
■ The dash camera combined with functions like WDR, HDR, Loop
Recording, 170° Wide Angle, Night Vision, Parking Monitor and
Time-lapse video recording（Dedicated ACC hardwire kit required）,
G-Sensor. Also provide the Wi-Fi wireless connection via Application to
your smartphone for live monitor, review, download and setting the Dash
Cam device.
■ Please read the manual carefully for installation, operation, and
specification checking. (Specifications may vary upgrades, updates, and
other reasons to change, to prevail in kind.)
Before Use:
■ Download and install the "Viidure " Application from App Store (iOS)
or Google Play (Android) to your smartphone. Power on the dash cam and
test the smartphone connectivity before the Installation. Make sure the
function works as normal, then start the dash cam installation into your
vehicle.
■ It is recommended to use a high-speed Calss10 MicroSD card (with C10
marked) for this Dash Cam, Max 128GB supported. A 32G MicroSD card
<<< Preface >>>

has been pre-installed into the card slot of the device. (The other low
speed MicroSD card may cause the system slow or other malfunction
during the use.) Format the MicroSD card monthly by Dash Cam via the
application setting menu on the smartphone, or for first use of other
MicroSD card.
■ Remove the lens protective film to avoid affecting the recording effect
after installing the product for the first time.
■ The Parking Mode functions as the optional functions of this device
( Parking Monitor Collision Detection or Time-lapse Video recording)
required a DC12V power kit hardware to work with together. (Sold
separate, search ASIN: B09WK14C88 from Amazon.com)
■ The default SSID of this dash camera is initial letters with
"AX2V_CarDV_xxxx ". The default passcode is: 12345678. You can
change the SSID and passcode from the APP setting menu after connect
the device via a smartphone connection.
■ The dash camera system time and date will be sync with the
smartphone automatically after the device connected to the phone.

Main Chipset: Novatek 96675, 2K Resolution,1600P@30fps
Image Sensor: 5M Pixels COMS sensor
Lens: 170° Wide-Angle High Definition Camera, F1.8
Video resolution: 2K QHD 1600P@30fps;
1080@30fps, 720P@ 30fps
Video format: .TS format, H.264 Coded
Photo resolution: 12M Pixels
SD card capacity: Class10, Max 128GB MicroSD card.
Wi-Fi: Built-in 2.4G Wi-Fi module
Gravity Sensor: Built-in three-axis collision acceleration sensor
Parking Mode (Optional): Parking Monitor Collision Detection or
Time-lapse Video Recording 2 choose 1 at a time.
Microphone: Built-in; Can be set On/Off via APP.
Voice notice: Voice notice of major functions by built-in speaker
Working temperature: -4℉ ~ +149℉（-20℃~+65℃）
Working Voltage: DC 5V~12V / 1.5A Max
Rate Power: 7.5W Max
LED Indicator:
Red LED ON---Power On / Stop recording / No card (Card error)
Blue LED Blinking per 1s --- Video recording
Blue LED Blinking per 10s --- Parking Mode (Time-lapse Video recording)
<<< Specification >>>

SD card files path as follows:
"Novatek" folder at the root of SD card, into the folder:
"Loop": Normal recorded video files
"Snapshot": Snapshot image folder (The Android devices will be
download the images to the Smartphone photo album and delete the
files on the SD card automatically after exit APP. )
"Locked": Locked files that won't be auto write over ( Actives by
Collision during normal recording or Parking Monitor or Time-lapse
video recording modes)
"Parking Mode"：Time-lapse recorded video files
What In the box:
Dash Cam × 1pc;
32G Micro SD Card Pre-installed × 1pc
Mounting Bracket × 1pc;
User Manual × 1pc
Car Cig Charger × 1pc (Cable Length (11.5FT))
Crowbar × 1pc;
Electrostatic Film × 1pc;

■ The dash camera is designed as detachable with the mounting bracket for
easy operation.
■ Rotatable mounting bracket pad, for vertical view angle adjustable.
■ Function Button:
Press to Stop / Start Video recording;
Press and hold for 10s, to reset the hardware and load the default settings
(included the SSID/ PSW of Wi-Fi) then power off the device. Press again to
power On the device.
<<< Appearance and buttons >>>

For iOS devices: Please search the “Viidure” from APP Store
download for free.
For Android devices: Please search “Viidure” from Google Play
download for free.
Or Scan the below QR code for quickly download.
For iOS device For Android device
<<< APPLICATION Download >>>

Main page of APP
<<< APPLICATION QUICK GUIDE >>>

Real-Time Display Interface of APP

File Browse Interface of APP
Click icon from rear-time display page into files browse.
"Loop": Normal recorded video files
"Snapshot": Snapshot image folder (The Android devices will be download the
images to the Smartphone photo album and delete the files on the SD card
automatically after exit APP. )
"Locked": Locked files that won't be auto overwrite ( Actives by Collision during
normal recording or Parking Monitor or Time-lapse video recording modes)
"Parking Mode"：Time-lapse recorded video files

Video Playback Interface of APP
Click any video file from preview folder, into the playback interface.

Dash Camera Setting Options Interface of APP
Sound Recording：On/Off
Photo Resolution:12M/10M/8M/Cancel
Video Resolution: 1600P@30FPS/1080P@30FPS/720P@30FPS
Loop Recording Options: Off/1Minute/2Minutes/Cancel
Exposure Compensation: -2~0~+2
Video Watermark：On/Off
Collision Sensing: Off/Low/Middle/High/Cancel
Parking Mode (Optional functions, Power hardware kit required)
Parking Monitor Collision Detection: Off/Low/Middle/High/Cancel
(Note: ACC Power hardwire kit is required, not included in the package)

Time-lapse Video Duration:12hour/24hour/48hour/72hour/96hour/Cancel
(Note: ACC hardwire kit is required, not included in the package)
Time-lapse Video FPS: Off/1FPS/3FPS/5FPS/Cancel
WI-FI Name: Wi-Fi SSID can be modified
Wi-Fi Password: Wi-Fi passcode can be modified (Press and hold the power
button for 10s to rest the passcode to default "12345678")
Firmware Version: Device Firmware version
Format SD Card: Card format. All contents on the card will be Delete, save the
needed files before formatting.
Reset: Load the default settings of all parameters (except Wi-Fi SSID and passcode
settings)
Notice: The dash camera recommends to be mounted at the top-middle of
windshield, behind the rear-view mirror. Which not block the driver's vision or
impede the operation.
There have two options of the wiring diagram to get the power.
Option A: Use the car cig charger that come with the box. The dash camera
will be power on after the ignition on, and auto power off once engine off.
Option B: Use the ACC power hardware kit to get power from car fuse box.
If there has any question about the installation, please contact with us by email:
[e-mail]
<<< Installation Demo >>>

Note: ACC power hardwire kit as a optional accessory for Parking Mode functions
(both Parking Monitor Collision Detection or Time-lapse Video recording) , not included
in the package and sold separate. (Search ASIN: B09WK14C88 from
Amazon.com)
Red Acc
Connect to ACC DC +12V (For the parking monitor function)
Black GND
Connect to the vehicle body
Yellow B+
Connect to the car Battery DC +12V constant power
<<< Wiring Diagram >>>

1. Camera can’t Power On:
Use the original car cig charger that come with box, check the car cig charger LED
indicator is on; Check the Power USB connector been plugged into the dash cam
USB port. Or if use the power hardware kit, check the B+ and ACC wiring are
correct, and make sure that the car is in ignition state.
2. The dash cam recorder cannot record, or the video has
dropped frames or freezes：
① Before use, format the SD card via setting menu from APP.
② Check the SD card status, a high-speed SD card or above C10 is required for
this device. The low-speed card might cause the system slow or malfunction of the
dash camera.
3. After connecting the recorder Wi-Fi, there is no display
from the APP：
① The permission requirements when opening the app for the first time must be
agreed, otherwise the app cannot be used normally, and it needs to be uninstalled
and reinstalled to obtain the permission again.
② Check the SSID name of the Wi-Fi that connected, should be initial with letters
"AX2V_CarDV_xxxx", otherwise, disconnect the WIFI and reconnect to the correct
WIFI SSID.
③ Ensure that the smartphone does not automatically cut off the WIFI of the
recorder.
<<< Common Troubleshooting >>>

4. Forget the Wi-Fi passcode
Press and hold the Power Button for 10s, to reset the hardware and load the default
settings, included the passcode of Wi-Fi to "12345678".
If there has any questions or suggestions during the using of the product, please fell
free to let us know, we are 7x24h stand by and will try to find out the best solution for
you ASAP.
Before you return the product, please contact with us first, there might has a
better and prompt solution to solve the issue for you. Make every user satisfied
is our final goal.
For Products information: [e-mail]
For Tech Support or After service: [e-mail]
Notice:
Do not operate the phone or dash cam while driving. The wireless control of dash cam via
Smartphone only after the vehicle safely parked.
Apple, iPhone, iPod, iPad and APP Store are trademarks of Apple Inc., registered in the U.S. and other countries.
Android, Google Play, and Google are trademarks of Google Inc.
Other trademarks and trade names are those of their respective owners.
iPhones, Android smartphones or any other accessories shown or listed are not supplied and must be purchased
separately.
Design and specifications are subject to change without notice.
Printed in China