AX2V DV-690WM User manual

Mode:DV-690ＷＭ
1080P FULL HD WIRELESS DASH CAM
User Manual

■Thank you for choosing our 1080P FHD Wi-Fi Dash Cam.
Please read the user manual carefully before starting use this
device.
■The device includes features like as HDR, Loop Recording, 155°
Wide View Angle, Night Vision, Time-lapse recording, Parking
Monitor, and G-Sensor, as well as the ability to connect to a
smartphone through Wi-Fi for live view, video browsing, and device
settings.
■This manual should be kept for installation, operation, and
specification checks. Upgrades, updates, and other reasons for
change may cause specifications to change, resulting in a change
in type.
Before use:
■Remove the lens protective film to avoid affecting the recording
effect and after the dash cam been properly mounted.
■Download and install the “Car_DVR” APP from APP Store (iOS
devices) or Google Play (Android devices) to your smartphone.
<<< Preface >>>

■After the product is installed, please use your mobile phone to
connect the DVR, open the APP to enter the preview interface to
check the real-time video screen. At this time, the recorder will
automatically synchronize the phone time.
■When using the time-lapse photography function, the camera will
keep recording video at 1 frame per second during parking. (Note:
The parking monitoring function needs to be turned off)
■Please make sure that the SD card is inserted in the correct
direction, otherwise it may cause damage to the recorder or SD
memory card.
■ CLass10 or above High-speed micro-SD card ( or or
icon on the TF card) is strongly recommended to be used for this
dash cam. Low-speed TF cards might result in video data loss,
video file damage, camera system slowness, and other unexpected
issues.
■When using the 64GB/128GB large memory TF card, the TF card
must be formatted with the recorder via APP, otherwise there may
be problems of not reading the card or not recording.

■It is best to take out the card and format it once a month, or after
connecting to the APP, format it through the mobile phone APP,
because some disk fragments will appear when the recorder writes
the card repeatedly, which affects the speed and life of the card.
■When there is an accident and you need to retrieve the contents
of the SD card, please eject the card, or download the video to your
mobile phone within 5 to 10 minutes after the accident. If it is too
early or late, the video may be overwritten or the video may not be
saved completely.
■ Turn on your smartphone or tablet wi-fi connection, find the
corresponding recorder wi-fi ISSD name "CAR_DVR _ ****",
connecting the default password is: 12345678.

Image Processor: H.264; 1080P@30fps
Image Sensor: 2M Pixels COMS sensor
Lens: 155° Wide-Angle High-Definition Camera, F1.8
Video resolution: 1080 30fps, 720P 30fps
Video format: .TS / H.264
Photo resolution: 2M Pixels
SD card capacity: Class10, Max support up to 128GB SD card
(Not included).
Wi-Fi: Built-in 2.4G WIFI module
Gravity Sensor: Built-in three-axis three-dimensional collision
acceleration sensor
Parking video: Support APP settings, time-lapse video and
collision video
Microphone: Support APP to turn on/off
Voice reminder: Support APP to turn on/off
Working temperature: - 20℃ — 70℃ / - 4°F — 158°F.
SD card file storage path as follows: Use a card reader to open
"Event": Folder of Locked video files (during the collision or parking monitor)
"Normal": Folder of regular video recorder files, time-lapse video included
"Photo": Folder of Snapshots
What included:
- DV-690WM dash cam x 1pc; - Mounting Pad x 1pc; - Crowbar x 1pc
- Power Harness (10 ft) x 1pc; - User Manual x 1pc;
<<< Specification >>>

Button function:
Multifunction button: Press to mark as locked of the current recording
video. (The file been saved at “Lock” folder)
Press and hold for 10s to reset the hardware and load the default settings
(included the SSID/ PSW of Wi-Fi), after then the dash camera will be restarted
automatically.
Photo Button: Press to take a snapshot.
LED Indicator:
There has 2LEDs (Blue and Red)
Blue --- Blue On （ Power On）
--- Blue Off （Power Off）
Red --- Slow Flashing --- Video Recording On
--- Constants On --- Video Recording Off
<<< Appearance and buttons >>>

For iOS devices: Please search the “Car_DVR” From APP Store
download for free.
For Android devices: Please search “Car_DVR” from Google Play
download for free. Or Scan the below QR code for quickly
download.
For iOS device For Android device
<<< APP Download >>>

APP introduction:

Camera Setting:
How to Connect to Wi-Fi?
Ensure that the recorder is normally worked and Wi-Fi is on→ Go to phone settings
→ Click on WLAN →Find the corresponding recorder WIFI name
"CAR_DVR _ ****" → → Connecting the Wi-Fi and input default
password:12345678.