Axcient x360Recover User manual

Axcient
Quick Start Guide
axcient.com
x360Recover Mini-Gen2
X360Recover Mini-Gen2
Quick Start Guide

©2022 Axcient, Inc. All rights reserved.
axcient.com 800.352.0248
Table of Contents........................................................................................................................... 2
Introduction ................................................................................................................................... 3
Axcient support .......................................................................................................................... 3
IMPORTANT NOTE on serial numbers ....................................................................................... 3
Warranty ..................................................................................................................................... 3
Maintenance information .......................................................................................................... 3
Quick Start Checklist...................................................................................................................... 4
STEP 1: Open the Shipping Box ................................................................................................. 4
STEP 2: Connect the Cables....................................................................................................... 4
STEP 3: Power On the Appliance ............................................................................................... 5
STEP 4: Record the IP Address................................................................................................... 5

©2022 Axcient, Inc. All rights reserved.
axcient.com 800.352.0248
This Quick Start Guide provides an overview of the Axcient x360Recover (formerly
Replibit) Mini-Gen2 appliance setup process, including:
•Setting up your x360Recover (formerly Replibit) BDR appliance hardware,
•Connecting the power and network cables,
•Locating optional ports on the appliance, and
•Powering on your x360Recover (formerly Replibit) appliance.
If you encounter problems during the setup process, contact Axcient support using one of the
following methods:
•Phone: [phone]
•Submit a Ticket: https://axcient.com/partner-support/
All Axcient product documentation is available in the Axcient Knowledgebase
(https://support.efolder.net/hc/en-us).
The warranty period for this BDR was set at the time of purchase. Please reference your
purchase invoice to identify the warranty period and starting date.
Only SSDs with special firmware from the manufacturer are supported. Attempted use of
unsupported SSDs will void all warranties and any related support.
For maintenance information, please reference the x360Recover Appliance
Options and Specifications
IMPORTANT NOTE on serial numbers
Please examine your hardware carefully and note the serial number on each appliance.
You will need to know these appliance serial numbers to properly locate the eth0 port
needed during installation. Additional instructions appear below.

©2022 Axcient, Inc. All rights reserved.
axcient.com 800.352.0248
Open the shipping box and
remove the Mini-Gen2 appliance,
power cord, and network
connection cable.
IMPORTANT: Please examine
your hardware carefully and note
the serial number on each
appliance. You will need to know
these appliance serial numbers
to properly locate the eth0 port
needed during installation.
Connect one end of the provided
network cable to the 1G NIC (eth0)
port on the back of the appliance
and the other end to your network
connection.
If the appliance serial number is
prefixed with RMS or RMH, the
eth0 port appears as illustrated in
Image 1.1

©2022 Axcient, Inc. All rights reserved.
axcient.com 800.352.0248
If the appliance serial number is
prefixed with RXS or RXH, the
eth0 port appears as illustrated in
Image 2.1
Next, connect the power cable to
the back of the appliance and plug
it into a power source.
Optionally, connect a second
network cable to the IPMI port.
This model is equipped with IPMI
functionality that can securely
access the BDR remotely. The IPMI
is pre-set with a unique username
and password, listed on the top
cover near the left front side of the
BDR. We recommend recording
these credentials during the
installation process.
Optionally, connect the
x360Recover appliance to a
monitor using a VGA cable (sold
separately). You can then use the
monitor to temporarily validate a
successful boot and the IP
address.

©2022 Axcient, Inc. All rights reserved.
axcient.com 800.352.0248
Open the appliance and press the
power button to turn on the
appliance.
The x360Recover backup software
is pre-installed on the BDR
appliance and will automatically
launch once fully booted. Most
x360Recover appliances will also
automatically obtain an IP address
through DHCP.
If you connected a monitor to the
BDR appliance, the IP address will
display directly on the screen.
Record this IP address.
Using a PC on the same network,
type the IP address into a web
browser to access the appliance
web interface.
When fully booted, x360Recover
must be provisioned (licensed)
using the appliance web interface.
Your hardware setup is complete!
To start protecting systems, please
proceed with setup and
provisioning. ( https://
help.axcient.com/001-install-
agents/appliance-setup-and-first-
time-login-x360recover )

©2020 Axcient, Inc. All rights reserved. axcient.com 800.715.2339