Axcient Replibit Mini-Gen2 User manual

User Guide
Page i
Replibit Mini-Gen2
Quick Start Guide

©2019 Axcient, Inc. All rights reserved.
axcient.com 800.715.2339
Table of Contents........................................................................................................................... 2
Introduction ................................................................................................................................... 3
Axcient Support.......................................................................................................................... 3
Warranty ..................................................................................................................................... 3
Maintenance Information .......................................................................................................... 3
Quick Start Checklist...................................................................................................................... 4
STEP 1: Open the Shipping Box ................................................................................................. 4
STEP 2: Connect the Cables....................................................................................................... 4
STEP 3: Power On the Appliance ............................................................................................... 5
STEP 4: Record the IP Address................................................................................................... 5

©2019 Axcient, Inc. All rights reserved.
axcient.com 800.715.2339
This Quick Start Guide provides an overview of the Axcient Replibit Mini-Gen2 Appliance
setup process, including:
•Setting up your Replibit BDR Appliance hardware,
•Connecting the power and network cables,
•Locating optional ports on the Appliance, and
•Powering on your Replibit Appliance.
If you encounter problems during the setup process, contact Axcient support using one of the
following methods:
•Phone: [phone]
•Submit a Ticket: https://axcient.com/partner-support/
All Axcient product documentation is available in the Axcient Knowledgebase
(https://support.efolder.net/hc/en-us).
The warranty period for this BDR was set at the time of purchase. Please reference your
purchase invoice to identify the warranty period and starting date.
Only SSDs with special firmware from the manufacturer are supported. Attempted use of
unsupported SSDs will void all warranties and any related support.
For maintenance information, please reference the Replibit Maintenance Manuals
(https://support.efolder.net/hc/en-us/articles/115004664107).
Last updated 11.25.2019

©2019 Axcient, Inc. All rights reserved.
axcient.com 800.715.2339
Open the shipping box and
remove the Mini-Gen2 Appliance,
power cord, and network
connection cable.
Connect one end of the provided
network cable to the eth0 port on
the back of the Appliance and the
other end to your network
connection.
Next, connect the power cable to
the back of the Appliance and
plug it into a power source.
Optionally, connect a second
network cable to the IPMI port for
full remote access.
Optionally, connect the Replibit
Appliance to a monitor using a
VGA cable (sold separately). You
can then use the monitor to
temporarily validate a successful
boot and the IP address.

©2019 Axcient, Inc. All rights reserved.
axcient.com 800.715.2339
Open the Appliance and press the
Power button to turn on the
Appliance.
The Replibit backup software is
pre-installed on the BDR
Appliance and will automatically
launch once fully booted. Most
Replibit appliances will also
automatically obtain an IP
address through DHCP.
If you connected a monitor to the
BDR Appliance, the IP address will
display directly on the screen.
Record this IP Address.
Using a PC on the same network,
type the IP address into a Web
browser to access the Appliance
Web interface.
When fully booted, Replibit must
be provisioned (licensed) using
the Appliance Web interface.
Your hardware setup is complete!
To start protecting systems,
please proceed with Web setup
and provisioning
(https://support.efolder.net/hc/e
n-us/articles/115006751528-
Replibit-Setup-and-First-Time-
Login).

©2019 Axcient, Inc. Allrights reserved. axcient.com 800.715.2339