Axcient x360Recover User manual

Axcient
Quick Start Guide
axcient.com
x360Recover Mini-Gen2
X360Recover Eco
Quick Start Guide

©2022 Axcient, Inc. All rights reserved.
axcient.com 800.352.0248
Table of Contents........................................................................................................................... 2
Introduction.................................................................................................................................... 3
Axcient support.......................................................................................................................... 3
IMPORTANT NOTE on serial numbers ....................................................................................... 3
Warranty ..................................................................................................................................... 3
Maintenance information .......................................................................................................... 3
Quick Start Checklist...................................................................................................................... 4
STEP 1: Open the Shipping Box................................................................................................. 4
STEP 2: Connect the Cables ....................................................................................................... 4
STEP 3: Power On the Appliance ............................................................................................... 5
STEP 4: Record the IP Address................................................................................................... 5

©2022 Axcient, Inc. All rights reserved.
axcient.com 800.352.0248
This Quick Start Guide provides an overview of the Axcient x360Recover (formerly
Replibit) Eco appliance setup process,including:
•Setting up your x360Recover (formerly Replibit) BDR appliance hardware,
•Connecting the power and network cables,
•Locating optional ports on the appliance, and
•Poweringon your x360Recover (formerly Replibit) appliance.
If you encounter problems during the setup process, contact Axcient supportusing one ofthe
followingmethods:
•Phone:[phone]
•Submit a Ticket: https://axcient.com/partner-support/
All Axcient productdocumentation is available in the Axcient Knowledgebase
(help.axcient.com).
The warrantyperiod for this BDR wasset at the time of purchase.Please referenceyour
purchase invoiceto identify the warranty periodandstarting date.
Only SSDs with special firmwarefromthe manufacturer are supported.Attempted use of
unsupported SSDs willvoid all warranties and any related support.
For maintenance information, please referencethe x360Recover Appliance
Options and Specifications
IMPORTANT NOTE on serial numbers
Please examine your hardwarecarefully and note the serialnumber on each appliance.
You will need to know these appliance serial numbers to properly locate the eth0 port
needed duringinstallation. Additionalinstructions appear below.

©2022 Axcient, Inc. All rights reserved.
axcient.com 800.352.0248
Open the shipping box and
remove the Eco appliance,power
cord, and network connection
cable.
IMPORTANT: Please examine
your hardwarecarefully and note
the serial number on each
appliance. Youwill need to know
these appliance serial numbers
to properly locate the eth0 port
needed duringinstallation.
Connect one end of the provided
networkcable to the 1G NIC (eth0)
networkport on the back of the
appliance and the other end to
your network connection.
If the appliance serial number is
prefixed with REI, the eth0 port
appears as illustrated in Image 1.0
If the appliance serial number is
prefixed with RXI, the eth0 port
appears as illustrated in Image 2.0

©2022 Axcient, Inc. All rights reserved.
axcient.com 800.352.0248
Next, connect the power cable to
the back of the appliance andplug
it into a power source.
Optionally,connect a second
networkcable to the IPMI port.
This model is equippedwith IPMI
functionality that can securely
access the BDR remotely. TheIPMI
is pre-setwith a unique username
and password,listedon the top
cover near the left front side of the
BDR. Werecommend recording
these credentials duringthe
installation process.
Optionally,connect the
x360Recover appliance to a
monitor using a VGA cable (sold
separately).You can then use the
monitor to temporarily validate a
successfulboot andthe IP
address.

©2022 Axcient, Inc. All rights reserved.
axcient.com 800.352.0248
Open the appliance and pressthe
power button to turn on the
appliance.
The x360Recover backup software
is pre-installedon the BDR
appliance and will automatically
launch once fully booted. Most
x360Recover appliances will also
automatically obtain an IP address
through DHCP.
If you connected a monitor to the
BDR appliance, the IP address will
display directly on the screen.
Recordthis IP address.
Using a PC on the same network,
type the IP addressinto a web
browser toaccess the appliance
webinterface.
When fully booted, x360Recover
must be provisioned (licensed)
usingthe appliance web interface.
Your hardware setupis complete!
Tostart protecting systems,please
proceedwith setup and
provisioning. ( https://
help.axcient.com/001-install-
agents/appliance-setup-and-first-
time-login-x360recover )

©2020 Axcient, Inc. All rights reserved. axcient.com 800.715.2339