Axel AXTRA User manual

AXTRA SYSTEM
USER MANUAL

Axtra System - User Manual - For all keypads AXEL
AXTRA System Index
User Activations Keypad and display indicators ...........................................................2
Keypad lock ....................................................................10
Total switch on and switch off with Code .....................................................11
Internal or partial switch on and switch off with Code ...............................................12
Switching on and off the control panel with only one Area in FAST MODE ....................................13
Switching on and off an Area in FAST MODE ...................................................14
Switching on and off different systems with Code .................................................15
Switching on and off in FAST MODE different systems (if programmed) .....................................17
How to activate direct alarm calls .........................................................19
Advanced functions How to access the Advanced Settings Menu ...................................................20
Primary Menu Diagram ..............................................................21
Advanced setting tree ...............................................................22
Event memory
•Consulting the Event Memory ....................................................23
•Event Memory download and Reset Alarm Alerts ..........................................24
Zone management
•Bypass and re-include zone .....................................................24
User Management
•Changing User Codes ........................................................25
Phone Numbers
•Changing phone numbers ......................................................26
Operations
•Activating and deactivating outputs ..................................................26
•Activating Macro instructions .....................................................27
•Activating and deactivating the programmable clock-calendar ....................................28
•Activate Overtime...........................................................29
•Reminder ...............................................................29
Date and Time settings ..............................................................30
System Test
•Phone calls and Walk test ......................................................30
•Keypad buzzer management and general relay activation ......................................31
•Checking Residual Credit.......................................................31
•SIM expiring and MyWeb management ...............................................32
•Enabling the installer and Cloud registration .............................................32
Thermometers ...................................................................33
Vocal remote function access (RFA)........................................................35
Text Message (SMS) Remote function access ..................................................36
1

Axtra System - User Manual - For all keypads AXEL
Florence keypad indicators
lThe yellow LED: if on, indicates the presence of the mains voltage of the control panel system.
lThe green LED: if off, indicates an anomaly of a low battery or battery malfunction of the control panel system.
lGreen LED: if on, indicates that all zones are active and closed
if off, indicates that at least one zone is open
if blinking, indicates that at least one zone is bypassed
lRed LED: if on, it indicates that the anti-intrusion control panel is switching on
if off, it indicates that the anti-intrusion control panel is switched off
if blinking, indicates that an alarm occurred in the previous ON state.
The next time the control panel is switched on, the LED will automatically stop
blinking
lON switch on button
lINTERNAL switch on button
lPARTIAL switch on button
lOK/ENTER button to confirm the data entered
lCLEAR button to delete the data entered
2

Axtra System - User Manual - For all keypads AXEL
Direct indicators on Florence keypad display
Display Normally the display shows the day of the
week, the date and time and a second line for
the information.
Anomalies The anomaly status of the control panel system are shown directly on the display when they occur:
•Lack of mains voltage
•Battery level
•Control panel system anti-tampering
Control panel status Similarly, the status of the control panel are shown directly on the display and keypad, for example:
•Control panel system switched on
•Zone alarm
centrale accesa
gi 8 mag 19:32
mancanza rete
ve 9 mag 20:12
malfunz. batterie
sa 10 mag 21:28
sensore ingresso
sa 10 mag 23:37
tamper
gi 8 giu 19:32
casa margherita
3

Axtra System - User Manual - For all keypads AXEL
4
Siena keypad indicators
•If on, it indicates an anomaly with the control panel battery.
•If on, it indicates a lack of the mains voltage of the intrusion control panel.
•If on, indicates a generic anomaly specified on the display.
•If blinking it means that a communication with the IP network is in progress.
•If on, indicates a tampering alarm of the anti-intrusion control panel.
Indicates the status of the system:
•if on, indicates that the anti-intrusion control panel is on activation mode:
»red color: ON mode
»yellow: INTernal mode
»blue color: PARziali mode
•if off, it indicates that the control panel is switched off.
•if blinking, it indicates that an alarm occurred in the previous ON state. The next time the
control panel will be switched on, the LED will automatically stop blinking.
lLED of switched ON groups
lON switch on button
lINTERNAL switch on button
lOK button to confirm the data entered
lPARTIAL switch on button
lCLEAR button to delete the data entered

Axtra System - User Manual - For all keypads AXEL
5
Direct indicators on Siena keypad display
Display Normally the display shows on the first line on the day of the week, the date and time and on
the second line a description.
Anomalies The anomaly status of the control panel are shown directly on the display when they occur, such as:
»The lack of mains voltage is also warned when the symbol is on.
»The insufficient level of the battery is also warned when the symbol is on.
»An alarm caused by an attempt of tampering with the system is reported as follows:
Anti-intrusion
control panel status
Similarly, the status of the control panel are shown directly on the keypad display, for example:
»Control power on in Full Mode [ON]
»Control panel on in INTernal mode
»Control panel on in PARzial mode
sa 10 mag 23:37
casa margherita
gi 8 mag 19:32
mancanza rete
sa 10 mag 23:37
tamper
ve 9 mag 20:12
malfunz. batterie
gi 8 giu 19:32
casa margherita
sa 10 mag 23:37
casa margherita
sa 10 mag 23:37
casa margherita

Axtra System - User Manual - For all keypads AXEL
6
Venice keypad indicators
lThe yellow symbol: if on, it indicates the presence of the mains voltage.
lThe green symbol: if on, it indicates that all zones are active and closed.
If off, indicates that at least one zone is open.
If blinking, indicates that at least one zone is bypassed.
lThe green symbol: if off, it indicates an anomaly with the battery charge of the anti-intrusion control panel.
lthe red symbol: if on, it indicates that the system is switching on.
If off, it indicates that the control panel system is switched off.
If blinking, it indicates that an alarm occurred in the previous ON state. The
next time the control panel is switched on, the LED will automatically stop blin-
king.
Note: On the left side of the keypad, red LEDs numbered 1 through 8 indicate the switch-on status of each group.
lFunction buttons.
lNavigation button
lON switch on button
lINTERNAL switch on button
lPARTIAL switch on button
lSWITCH-OFF button

Axtra System - User Manual - For all keypads AXEL
7
Direct indicators on Venice keypad display
Display Normally the display shows the day of the
week, the date, time and a second information
line.
Anomalies The anomaly status of the control panel are shown directly on the display when they occur:
•Lack of the mains voltage
•Battery level
•Anti-tampering control panel
Status of the
anti-intrusion
control panel
Similarly, the status of the control panel are shown directly on the display and keypad, for example:
•Control panel on
•Zone alarm
centrale accesa
gi 8 mag 19:32
mancanza rete
ve 9 mag 20:12
malfunz. batterie
sa 10 mag 21:28
sensore ingresso
sa 10 mag 23:37
tamper
MA 15 APR 18:37
casa DI ELENA

Axtra System - User Manual - For all keypads AXEL
8
Rome keypad indicators
On the display, under the two alphanumeric lines, a series of icons intuiti-
vely shows various information, divided into 5 groups:
•Activation status
•Control panel system status
•Technical information
•Climate control
•Automatisms
ME 27 APR 11 : 47
CASA di margherita
Indicates the ON Activation status
It is lit when the control panel is activated in total mode [ON]
Indicates the INTERNAL Activation status
It is lit when the control panel is activated in internal mode [INT]
Indicates the PARTIAL Activation status
It is lit when le control panel is activated in partial mode [PAR]
1. Activation status
Signal of Ready to Turn On
Appears when sensors are quiet
Blinks when there is one or more sensors excluded
Signal of Alarm or of Alarm Memory
Flashes during an alarm of the control panel system
It automatically resets the next time the control panel is turned on
Signal of Tamper Alarm
Flashes during an attempt to tamper with the system
2. Control panel system status
3. Technical information
Signal of Mains power
Flashes when there is lack of power supply
Signal of Battery charge
Flashes in case of an anomaly in the battery charge
Signal of Anomaly with the Telephone Land line
Flashes in case of lack of telephone land line
Signal of Phone GSM Anomaly
Flashes in case of missing GSM phone line
Signal of Buzzer Keypad excluded
Flashes when the keypad buzzer has been excluded
5. Automatisms
Signal of active Macro
Appears when a macro-instruction is occurring
Signal of enabled programmable Clock-Calendar
Appears when the programmable Clock-Calendar is enabled
Winter Mode activa
Appears when the winter mode of the programmable thermostat is activeo
Summer Mode active
Appears when the summer mode of the programmable thermostat is active
Active Automatic Thermostat
Appears when the auto-mode thermostat is active
4. Climate control

Axtra System - User Manual - For all keypads AXEL
9
Direct warnings on Rome keypad display
Display Normally the display shows the day of the week,
the date, time and, on the second line, a descrip-
tion.
Anomalies The anomaly status of the control panel are shown directly on the display when they occur, such as:
»The lack of mains voltage is also warned with the blinking of the symbol.
»The insufficient battery level is also warned when the symbol blinks.
»An alarm caused by an attempt to tamper with the system is reported as follows:
Status of the
control panel
Similarly, the status of the control panel are shown directly on the keypad display, for example:
»Control panel switched on in Full Mode [ON]
»Control panel switched on in INTernal mode
»Control panel switched on in PARzial mode
ME 27 APR 11 : 47
CASA margherita
gi 8 mag 19:32
mancanza rete
sa 10 mag 23:37
tamper
ve 9 mag 20:12
malfunz. batterie
sa 10 mag 23:37
casa margherita
sa 10 mag 23:37
casa margherita
sa 10 mag 23:37
casa margherita

Axtra System - User Manual - For all keypads AXEL
10
Indicator display with User Code
The indications of the areas that may be open or bypassed appear, for security reasons, after typing an enabled User
Code.
•By entering the User Code, the display will indicate whether some zones are open or have been bypassed:
On the Florence keypad, the
buttons to press at the same
time are INT and button 7
gi 8 mag 19:32
casa margherita
gi 8 mag 19:32
terminale disab.
gi 8 mag 20:30
terminale disab.
gi 8 mag 20:30
casa margherita
On the Florence keypad, the
buttons to press at the same
time are INT and button 7
aperta zona 2
sensore ingresso
esclusa zona 2
sensore ingresso
Keypad unlocking
To unlock the keypad, you must follow the same procedure as locking the keypad.
a) Press the PAR button and button 7 at the same time.
Keypad lock
It is possible to lock each individual keypad with a simple operation to prevent the keys from being accidentally pressed
or keypad functions activated.
a) Press the PAR button and button 7 at the same time.
•Open zone
•bypassed zone

Axtra System - User Manual - For all keypads AXEL
11
Total switch on with Code
a) The display shows the current date and time.
b) Enter the User Code.
c) The display will give all the information about open or bypassed zones
d) Press the button corresponding to the total switch: ON.
e) The display must not give warnings of open areas and the green circuit test LED must be on.
If it is off, it means that at least one zone is open. In this case, do not continue to switch on the control panel or the
alarm of the anti-intrusion control panel will be triggered. The zones reported as open must be controlled and, the-
refore, closed or bypassed (see How to bypass zones on page 18).
f) Press the OK button to confirm that the control panel is switched on in ON mode.
The red LED on the keypad will light up.
Switching off from total switch-on with Code
a) The display shows the current date and time.
b) Enter the User Code.
c) The display will confirm the recognition of the User Code and will show the status of the control panel; then press
the OFF button.
•The red LED of activation will go out on the keypad. If it blinks, it means that an alarm has occurred in the previo-
us switch on state; in this case the display will also indicate which area caused it; the reset of this alarm memory
will take place automatically the next time the control panel is switched on.
casa margherita
pronto [menu=9]
accensione on
ENT=si esc=no
centrale accesa
After 1 minute the display will
show the date and time.
Press the ESC button to exit
immediately.
centrale accesagi 8 mag 20:30
casa margherita
gi 8 mag 20:30
casa margherita

Axtra System - User Manual - For all keypads AXEL
12
Internal or partial switch on with Code
a) The display shows the current date and time.
b) Enter the User Code.
c) The display will give all information related to open or bypassed zones.
d) Press the button corresponding to the INTernal or PARziali switch on mode.
e) The display must not warn open zones and the green circuit test LED must be on or blinking to signal the bypassed
zones. If it is off, it means that at least one zone is open. In this case, do not continue to activate the control panel
or the alarm status of the control panel will be triggered. Zones reported as open must be controlled and, therefore,
closed or bypassed (see How to exclude zones on page 18).
f) Press the OK button to confirm the activation in INTernal or PARzial switch on mode.
The red LED on the keypad will light up.
•N.B.: Press BUTTON 1 to activate the special switch on; this mode automatically eliminates all output delays
related to timed lines.
Switching off from internal or partial switch on with Code
a) The display shows the current date and time.
b) Enter the User Code.
c) The display will confirm the recognition of the User Code and will show the switched-on status of the control panel;
then press the OFF button.
•The on red LED will switch off on the keypad. If it blinks, it means that an alarm has occurred in the previous acti-
ve state; in this case the display will also indicate which area caused it; the reset of this alarm memory will take
place automatically the next time the control panel is switched on.
casa margherita
pronto [menu=9]
int 1 = special
ENT=si esc=no
centrale accesa
After 1 minute the display will
show the date and time.
Press the ESC button to exit
immediately.
gi 8 mag 20:30
casa margherita
centrale accesa casa margherita
pronto [menu=9]

Axtra System - User Manual - For all keypads AXEL
13
Switching on the control panel with only one Area in FAST MODE
If the fast mode switch-on is enabled, you can switch on the control panel without having to enter the User Code.
a) The display shows the current date and time.
b) Press the button corresponding to your desired switch on mode 3 times:
•ON switch on mode
•INTernal switch on mode
•PARzial switch on mode
Switching off the control panel with only one Area in FAST MODE
a) The display shows the current date and time.
b) Enter the User Code.
c) The control panel will switch off immediately showing the current date and time.
•The on red LED will go out on the keypad. If the LED blinks, it means that an alarm has occurred in the previous
active status; in this case the display will also indicate which area caused it
The reset of this alarm memory will take place automatically the next time the control panel is switched on.
gi 8 mag 20:30
casa margherita
gi 8 mag 20:30
casa margherita
gi 8 mag 20:30
casa margherita
With INTernal and PARtial quick arm
modesexit and entry time for delayed
lines will always be available
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi o o
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi É É

Axtra System - User Manual - For all keypads AXEL
14
Switching on an Area in FAST MODE
If the fast mode switch-on is enabled, you can switch on the control panel without having to enter the User Code.
a) The display shows the current date and time.
b) Press the button corresponding to the chosen switch on mode 2 times and then press the number of the Area you
want:
•E.g.: ON switch on button of Area n°1
•E.g.: INTernal switch on button of Area n°1
•E.g.: PARzial switch on button of Area n°1
Switch off all Areas in FAST MODE
a) The display shows the current date and time.
b) Enter the User Code.
c) Press the OFF and OK button: all Areas will switch off.
d) Press the ESC button to exit.
•The switched on red LEDs of the Area will go out on the keypad. Instead if one of the LEDs blinks, it means that
an alarm has occurred in the previous active status of a zone related to the Area; in this case the display will also
indicate which zone caused it.
The reset of this alarm memory will take place automatically the next time the Area is switched on.
gi 8 mag 20:30
casa margherita
gi 8 mag 20:30
casa margherita
gi 8 mag 20:30
casa margherita
With INTernal and PARtial quick arm
modesexit and entry time for delayed
lines will always be available
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi o o
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi É É

Axtra System - User Manual - For all keypads AXEL
•Bypassed zone in Area 1; pressing button 1 and the OK but-
ton you control which zone of Area 1 is bypassed
•The Code is associated with Area 1 and 2
•Open zone in Area 2; in this case press button 2 and button
OK to control which zone of the Area 2 is open
15
Switching on different systems with Code
a) The display shows the current date and time.
b) Enter the User Code.
c) Only on the keypad where you are working, the display will show the Areas associated with the entered Code only
and cases of anomaly will be shown on the display only when they occur, through graphic symbols.
d) If you want to switch on Area 1, press Button 01 to choose the Area.
e) Press OK button to confirm.
f) The display will show the Control Panel Name “READY” [PRONTO].
g) Press ON, INTernal, or PARzialized button to choose the switch-on mode for this Area.
h) Press the OK button to confirm. On Area 1, the active status will be indicated in the chosen mode. [O] for ON, [I] for
INTernal, and [P] for PARzial.
k) To switch on the other Areas, the same procedure applies.
Example of Group 1 activation in ON mode
Note: the A Group indicates n° 10 and so on until n° 16 (Group G)
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi É É
gruppi 1 2
stato 
gruppi 1 2
stato ¢
accensione ON
ENT=si esc=no
gruppi 1 2
accesi o o
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi É É
abitazione
pronto [menu=9]

Axtra System - User Manual - For all keypads AXEL
16
Switching off different systems with Code
a) The display shows the current date and time.
b) Enter the User Code.
c) Only on the keypad where you are working, the display will show the Areas associated with the inserted Code only
and the switch on modes for each individual Area. [O] for ON, [I] for INTernal, and [P] for PARzial.
d) If you want to switch off Area 1, press Button 01 to choose the area.
e) Press the OK button to confirm.
f) The display will show “CONTROL PANEL ON” [CENTRALE ACCESA].
g) Press the OFF button to switch off the Area and the ESC button to return to the previous menu.
h) The display will return to show the status of all the systems.
k) It is possible to proceed in the same way to switch off the other Areas
i) Press the ESC button to exit.
After 1 minute the display
will show the date and
time. Press the ESC button
to exit immediately
gruppi 1 2
accesi o o
gi 8 mag 20:30
casa margherita
centrale accesa
gruppi 1 2
accesi o
gi 8 mag 20:30
casa margherita
abitazione
pronto [menu=9]

Axtra System - User Manual - For all keypads AXEL
Switching on multiple systems in FAST MODE (if programmed).
a) The display shows the current date and time.
b) Enter the User Code.
c) The display will show the Areas associated with the inserted Code only and the cases of anomaly will be shown
on the display only when they occur, through graphic symbols.
•The Code is associated with Areas 1 and 2
•Open zone in Area 1; in this case press button 1 to control
which zone of Group 1 is open
•Excluded zone in Area 1; pressing button 1 controls which
zone of Area 1 is bypassed
d) If you want to switch on all Areas in a single step (ON, INTernal or PARzial) you must press the button correspon-
ding to the chosen mode.
•ON switch on button
•INTernal switch on button
•PARzial switch on button
17
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi É É
gruppi 1 2
stato 
gruppi 1 2
stato ¢
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi É É
accensione on
ent=si esc=no
gruppi 1 2
accesi o o
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi É É
attiva in int
ent=si esc=no
gruppi 1 2
accesi i i
gi 8 mag 20:30
casa margherita
attiva in par
ent=si esc=no
gruppi 1 2
accesi p p
gruppi 1 2
accesi É É

Axtra System - User Manual - For all keypads AXEL
18
Switching off multiple systems in FAST MODE (if programmed)
a) The display shows the current date and time.
b) Enter the User Code.
c) The display will show the Areas associated with the Inserted Code only and the switch on modes for each individual
Area; [O] for ON, [I] for INTernal, and [P] for PARzial.
d) Press the OFF button and the OK button to switch off all Areas at the same time.
d) Press the ESC button to exit.
•Examples of general switch off:
gruppi 1 2
accesi É É
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi É É
gi 8 mag 20:30
casa margherita
gi 8 mag 20:30
casa margherita
gi 8 mag 20:30
casa margherita
gi 8 mag 20:30
casa margherita
gruppi 1 2
accesi o o
gruppi 1 2
accesi É É
gruppi 1 2
accesi o
gruppi 1 2
accesi o p
gi 8 mag 20:30
casa margherita