AXEM Technology YOU Setup guide

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –info@axemtec.com –+33 (0)1 41 94 11 85 –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : quick start user guide YOU reader
Version : V1.0
1/5
Quick start user
guide
YOU reader

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –info@axemtec.com –+33 (0)1 41 94 11 85 –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : quick start user guide YOU reader
Version : V1.0
2/5
Table des matières
1Introduction ...................................................................................................................................4
1.1 First time use .........................................................................................................................4
1.2 Understanding the LEDs and the beeper..............................................................................4
2Reader configuration ....................................................................................................................5
2.1 YOU reader in keyboard emulation.......................................................................................5
2.1.1 1What is keyboard emulation? ......................................................................................5
2.1.2 How it works...................................................................................................................5
2.2 YOU reader in PC/SC mode .................................................................................................5
2.2.1 What is PC/SC mode? ...................................................................................................5
2.2.2 How it works...................................................................................................................5

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –info@axemtec.com –+33 (0)1 41 94 11 85 –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : quick start user guide YOU reader
Version : V1.0
3/5
1Background
Description
Date
Version
Author
Auditor
First parution
01/04/2021
V1.0

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –info@axemtec.com –+33 (0)1 41 94 11 85 –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : quick start user guide YOU reader
Version : V1.0
4/5
2Introduction
The YOU reader is a contactless reader that can read NFC/RFID cards @13.56MHz. It can be used
in keyboard emulation or in PC/SC. This configuration can be requested when ordering the reader
from AXEM Technology.
2.1 First time use
Connect the YOU reader to one of the USB ports on your computer.
Wait 10 to 20 seconds until the operating system turns on the reader driver and activates the reader.
The first time you connect the reader, it may take a few seconds to activate or download drivers.
This is normal.
After that, the coupler device will be activated within a few seconds.
Watch the LEDs on the device. As soon as the cyan light enters a "periodic on/off" sequence, the
device is ready!
2.2 Understanding the LEDs and the beeper
LED and Bips
Description
Blue LED
The device is ready and waiting for a contactless card.
Unique Bip + green LED
A contactless card is present and available for operation.
Repeted bips
The communication between the device and the card is not reliable. Place
the card closer to the device. Install the device in a different location.
Red LED, flashing
Problem (hardware error or overheating).
Yellow LED, flashing
The PC has not yet activated the device.

AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE –info@axemtec.com –+33 (0)1 41 94 11 85 –www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : quick start user guide YOU reader
Version : V1.0
5/5
3Reader configuration
The reader can be configured in keyboard emulation or in PC/SC. This configuration can only be
executed by AXEM Technology and cannot be modified.
3.1 YOU reader in keyboard emulation
3.1.1 1What is keyboard emulation?
This means that the reader is viewed as a keyboard by your computer.
3.1.2 How it works
To use the reader in keyboard emulation, you may open a spreadsheet or notepad file. When you
pass an NFC card, NFC tag or NFC RFID tag over the reader, the information contained in its chip
will be displayed directly on your computer. When the read is successful, you will hear a "beep" and
the LEDs will light up blue.
When ordering, AXEM Technology can configure the reader to read in decimal, hexadecimal, direct
or indirect format.
3.2 YOU reader in PC/SC mode
It is also possible to control the YOU reader in PC/SC mode.
3.2.1 What is PC/SC mode?
PC/SC stands for Personal Computer / Smart Card. It is an interoperability standard between PCs
and smart cards.
To use it in this mode, you must have the reader libraries provided by AXEM Technology to develop
your software. The reader will not work in keyboard emulation, and will need this software to allow
the PC, reader and smart cards to communicate with each other.
3.2.2 How it works
To use the reader in PC/SC, place a compatible contactless card in the reader. The device will beep
briefly and its LEDs will light up green when it is working properly.
__ END __
Table of contents
Popular Card Reader manuals by other brands

Digilock
Digilock Curve Product guide

SCM Microsystems
SCM Microsystems DAZZLE user manual

suprema
suprema WEBtec-4X Product overview and installation instructions

Kingston Technology
Kingston Technology MLWG3/64ER user manual

Cherry
Cherry SmartTerminal ST-2000U instructions

JARLTECH
JARLTECH JB-1300 Operation manual