Axial EXO Terra Buggy User manual

4
4
4
4

4
4
4
4

Battery Selection /
NiMh
LiPo
Recommended Capacity: 3600mah or more
Recommended Voltage: 7.2V
Deans Plug Required
AE-3 ESC Lipo Cutoff position: OFF (pre-programmed ON stock)
Recommended Capacity: 4000mah 30C or more
Recommended Voltage: 7.4V - 11.1V (2s or 3s)
Deans Plug Required
AE-3 ESC Lipo Cutoff position: ON (pre-programed ON stock)
Recommended motor: AX24010
Trim Strap
Trim Strap If Necessary
Install Per Diagram
Adjust Length For Snug Fit
2.
Adjust Strap Position If Necessary
2.
1.
1.
3.
Adjust Length For Snug Fit
3.

ST-TRIM TH-TRIM ST-D/R
BIND

5. Turn on the electronic speed controller.
2. Install the battery
Put back the Body.
1. Removing the Body
Put the battery in the car.
3. Turn on the transmitter.
ON
OFF
4. Plug in battery.
Connect rmly.
ON
OFF

8
AX80005
Ball End x1
AX80033
10mm Shock Set 1 x2
AX80018
Hardware Parts Tree x2
AX80036
72-103mm Shock Body x1
AX80035
10mm Shock Caps Set x2
AX30743
52T Spur Gear x1
AX80034
10mm Shock Set 2 x2
AX80091
EXO Bulkhead x2
AX80092
EXO Linkage Set x2
AX80006
Servo Set x1

9
AX80093
EXO Tube Bumpers (Front and Rear) x1
AX80095
EXO Rear Wing and Vents x1
AX80096
67-90mm Shock Body Set x1
AX80097
EXO Shock Tower Set (Front and Rear) x1
AX80099
EXO Steering Knuckle Set x1
AX80098
EXO Adjustable Battery Mount Set x1
AX80094
EXO Lower Rear Control Arms Set x1

10
AX80100
EXO Chassis Guard and Toe Block Insert Set (Front and Rear) x1
AX80101
EXO Chassis Brace Set x1
AX80103
EXO Rear Light Bezel and Radiator Set x1
AX80104
EXO Rear Hub Set x1
AX80105
EXO Chassis Component Mountssis x1
AX80106
EXO Steering Knuckle Carrier Set x1
AX80102
EXO Servo Saver Set x1