axing ORX 1-00 User manual

ORX 1-00
CATV Optical Receiver
Operation instructions

Operation Instructions | ORX 1-00 | CATV Optical Receiver
22017-10-24 | Technical improvements, changes in design, printing- and other errors expected.
Table of contents
1. Description...........................................................................................................................................................4
1.1. Delivery........................................................................................................................................................4
1.2. Features.......................................................................................................................................................4
1.3. Applications.................................................................................................................................................4
1.4. Block Diagram .............................................................................................................................................4
2. Installation...........................................................................................................................................................6
3. Troubleshooting...................................................................................................................................................8
4. Specification.........................................................................................................................................................9
4.1.1. Optical Characteristics.........................................................................................................................9
4.1.2. RF Characteristics................................................................................................................................9

2017-10-24 | Technical improvements, changes in design, printing- and other errors expected. 3
Safety instructions
∂ORX 1-00 is indoor design without waterprooffunction.
If it works outdoor that should be put into a waterproof and moisture-proof cabinet.
∂Installation MUST be operated by trained or professional person.
Direct eye exposure to laser beam may cause physical damage

Operation Instructions | ORX 1-00 | CATV Optical Receiver
4
2017-10-24 | Technical improvements, changes in design, printing- and other errors expected.
1. Description
ORX 1-00 CATV optical receiver, compacted in size, designed for FTTH (Fiber To The Home) networks. ORX 1-
00 works under 1100~1650nm. ORX 1-00 is the new type micro optical receiver with LED optical power
indicator.
1.1. Delivery
Description Quantity
Optical Receiver Unit 1
External Power Supply Adapter 1
User’s Manual 1
1.2. Features
∂Compacted in size with nice appearance
∂AGC (Auto Gain Control) function
∂Low power consumption <3W
∂0~10dB adjustable attenuator
∂Low noise and high sensitive PIN Diode
∂External power supply adapter
∂Cost effective with high performance
1.3. Applications
∂CATV, HFC networks
∂FTTH, FTTB networks
∂PON RF Overlay
1.4. Block Diagram

2017-10-24 | Technical improvements, changes in design, printing- and other errors expected. 5
Outlines Drawing (dimensions are in mm)
No Description
1Optical Input Port: optical input connecter insert here
2Optical Power Indicator: Green (Normal); Red (Strong); No Light (Weak/No power)
3Power ON/OFF Indicator:
40~10dB Adjustable Attenuator: Counter-clockwise increases value
5RF Output Port: RF signal output to TV
6Power Jacket: 9VDC or 12VDC
‚
ƒ
…
†
„
†
• …

Operation Instructions | ORX 1-00 | CATV Optical Receiver
6
2017-10-24 | Technical improvements, changes in design, printing- and other errors expected.
2. Installation
Caution
∂1.ORX 1-00 is indoor design without waterproof function.
If it works outdoor that should be put into a waterproof and moisture-proof cabinet
∂2. Power supply is required as 100-240VAC with lightning protection
∂3.Installation MUST be operated by trained or professional person.
Insert the AC power cord into the power jack, and connect to power socket
Connect to power jack
When get through the power supply, the power supply indicator turns ON in RED
Connect coaxial cable to RF Output Port
F5 cable connector to
RF output port
Power Supply Indicator

2017-10-24 | Technical improvements, changes in design, printing- and other errors expected.
7
Clean the fiber cable connector and ends with cleaning toolsDo not scratch the fiber connector or ends.
Wipe the surface with alcohol with a dust-free cloth. Next, wipe it with a dry dust free cloth, and then
quickly wave the fiber end back and forth in the air. Do not blow air onto the fiber to dry it.
Direct eye exposure to laser beam may cause physical damage
Well connect fiber optical connector to optical receiver’s optical input port
Insert here
Verify input optical power indicator in 3 status
Status Description
Green Color input power is under working range
Red Color input power is strong
Light OFF Input power is weak or no input power
Check RF output level by FSM,adjust Attenuator(E) to get the required output level
Operation Description
Increase Value Rotate counter-clockwise 0~10dB
Decrease Value Rotate clockwise 0~10dB
Mounted on the wall or enclosure.
optical power indicator
Adjustable Attenuator

Operation Instructions | ORX 1-00 | CATV Optical Receiver
82017-10-24 | Technical improvements, changes in design, printing- and other errors expected.
3. Troubleshooting
Status Possible Method to slove
Power supply LED indicator is OFF Check the power cord plug is well connected
Check the power jack on receiver is firmed well
Input optical signal is poor Check input power according to 3-stage input power indicator or
measure the input power
Check optical connector: SC/UPC or SC/APC is corrected
Clean the optical connector’ surface
Output level is low Verify the input optical signal is normal
Check the Adjustable Attenuator is correct, rotate it to get
the required output level
Check optical transmitter work normally

2017-10-24 | Technical improvements, changes in design, printing- and other errors expected. 9
4. Specification
4.1.1. Optical Characteristics
Parameter Unit Value
Wavelength nm 1100-1650
Input Level Range (PIN) dBm -12~ -1
AGC Range dBm -10~ -3
Optical Return Loss dB ≥45
Connector Type -- FC/APC or SC/APC
4.1.2. RF Characteristics
Parameter Unit Value
Frequency Range MHz 47~1002
Gain Flatness dB ±0.75
Output Level dBµV 80±1
CTB1 dB ≥63
CSO1 dB ≥63
C/N1 dB ≥51

Operation Instructions | ORX 1-00 | CATV Optical Receiver
10
2015
-
11
-
29
|
©
AXING
AG
Swizzerland
|
Technical
data
are
subject
to
change,
errors
and
omissions
excepted