Axio MET AX-5001 User manual

TEMPERATURE/HUMIDITY/DEW
POINT METER
AX-5001
Users Manual

2
1. INTRODUCTION
Thank you for purchasing the temperature/humidity/dew point meter from us. Please teake a few
minutes to browse through this user manual before you begin to operate the meter to wnsure that
you are fully familiarised with how best to operate the meter as accurately and safely as possible.
The meter is temperature and humidity measuring instrument. It is normally used to measure the
humidity and temperature in ofices, storerooms, buildings and greenhouses.
1.1. Precau ions safe y measures
To get the best service from this meter, please read this usee’s manual varefully and observe the
detailed safety precautions strictly.
1.1.1. During use
1. on’t touch the humidity sensor.
2. on’t expose the sensor to direct light, this causes a false reading.
3. Never store the product together with solvents, acides or other aggressive subtances.
1.1.2. Main aining he produc
•o not measure at a high temperature places.
•When not using the instrument for a long time, please remove the battery and avoid storing in
high temperature and high humidity.
2. FEATURES
1. isplay: 4 digits LC isplay
2. Parameters: °C,°F, 0,1%RH (relative humidity), td(dew point temperature)
3. Resolution: 0,1°C, 0,1°F, 0,1%RH
4. Range: -10~+50°C, +14~+122°F, 0~+100%RH
5. Accuracy: ±1.0°C,±1.8°F, ±3%RH (5~95%RH)
6. Sample rate: 1 time/sec
7. auto power off: about 20 minutes
8. Operating envirnment: -10~+50°C, +14~+122°F
9. Storage environment: -20~+60°C, -4~+140°F
10. imension and Weight: 121(L)x60(W)x30(H)mm, about 180g
11. Accessories: C1.5V (AAA) x 3 pcs
String x 1 pcs
Users manual x 1 pcs.

3
3. NAMES OF PARTS
3.1.Ins rumen Familiariza ion
1. Sensor cover
2. Sensor
3. LC display
4. Function key
3.2. LCD Display
The meaning of symbols represented by the following:
1. Indicating it is now in the data-holding state
2. Indication to back light
3. isplay zone
4. isplay zone
5. Average/Maximum/minimize
6. Humidity units
7. temperature units
8. Indication to low voltage of the batteries.
4. OPERATION INSTRUCTION
*NOTE: In order to ensure the accuracy of the measurement readings, all the interference sources
which may affect the measurement results about temperature and humidity (such as the hand) must
be away from the sensor.
1. Put the instrument with enough battery power in the hand, press the ON/OFF key ti turn the
power on and enter into the measuring mode. The LC will display current value of temperature
and humidity. The default humidity/ temperature unit is % RH/°C.
2. Press UNIT key to chnage the humidity/ temperature unit. The adjustable parametres are % RH
(relative humidity), td ( ew-point temperature), °C,°F; press the MO E and key to
change MAX/MIN and HOL mode.
3. Switching the back light on. When the meter is power on, press key>2 sec. the back
light will be turned on, and the icon will display on the LC . Press the key once>2 sec. the
light will be turned off, and the icon will disappeared. If you still need more operations, please see
the description of function keys.

4
5. FUNCTIONS KEYS
1. ON/OFF key
Press the key to turn the power ON and press the key once more>2 sec. To turn the power OFF.
2. Mode key
Press the key can select the state of MAX, MIN LC will display the maximum values since the
instrument was last switched on or last reset.
3. Uni key
Press the key can change the parameter unit. Adjustable units: %RH/°C, td/°C,%RH/°F, td/°F.
4. key
Press the key a icon will display on the LC and the readout held In. Press the key once more
to cancel the hold function.
Press the key >2 sec. the back light will be turned on, and the icon will display on the LC .
Press the key once >2 sec. the light will be turned off, and the icon will disappeared.
5. Au o power off se ing
When the meter is powered on, it is under auto power off mode. The meter will power itself off
after 20 minutes if no key operation. Cancelled auto power off function: press Hold key when power
on until the LC display AP OFF, then press the Hold key again to confirm the setting.
6. MAINTENANCE
1. Cleaning Instructions
The meter may be wiped down with a wet sponge or cloth using a mild water based detergent or
anti-bacterial soap and rinsed under a gentle stream of cold water.
NOTE:
This unit is not designed for complete submersion or washing in water.
2. Battery replacement
Use the following procedure:
When the battery voltage drop below proper operation range the symbol will appear on the
LC display and the battery needs to be replaced.
•Press the battery cover and towards arrowhead direction to open the battery cover.
•Replace the battery with three new 1.5V batteries (AAA)
•Replace the battery cover.