Axiom VP150 User manual

Rev: 1.0 v1
Location: / Positionnement:
Step-by-step instructions on conguring your on-wall speakers.
VP150 On-Wall Speakers
Owners Manual
e Axiom Warranty
All our speaker models; towers, bookshelves, surrounds, centers, subwoofers and
all our ampliers; subwoofer and multichannel ampliers are warrantied against
manufacturer’s defects for 5 years.
AXIOM CANADA INC. warrants this audio loudspeaker system (the “Product”)
to be free from original manufacturing defects in materials and workmanship for
ve years from date of purchase from an authorized Axiom dealer. This warranty
extends only to the original consumer purchaser. AXIOM CANADA INC. does
not warrant goods used in commercial or industrial applications. This warranty
does not cover any expenses incurred in any removal or re-installation of the
product.
If the product should prove so defective within the warranty period, return the
product by prepaid delivery to AXIOM CANADA INC., along with the original
sales invoice or other proof of purchase, which establishes eligibility for warranty
service. AXIOM CANADA INC. will, at its option, replace or repair the product
free of charge and return the product by prepaid delivery. This warranty does not
apply to any product, which has been damaged, misused, altered or repaired by
anyone other than an AXIOM CANADA INC. authorized service facility.
Any implied warranties including tness for use and merchantability are limited
in duration to the period of the express warranties set forth above, and no person
is authorized to assume for Axiom Canada Inc. any other liability in connection
with the sale of the product. Axiom Canada Inc. expressly disclaims liability for
any incidental and consequential damages caused by the product. The remedies
provided under this warranty are exclusive and in lieu of all others.
This warranty gives specic legal rights. In addition, there may be other legal
rights arising from the sale of the product, which vary from province to province
or state to state. Some provinces / states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may
not apply in some areas.
Model: VP150 On-Wall Modèle :
Max Rec. Amp Power: 400 Watts Puissance maximale admissible :
Min Amp Power: 10 Watts Puissance minimale :
Frequency Response +/- 3dB: 95Hz – 22 kHz Réponse en freq. +/- 3dB :
Frequency Response + 3dB/- 9dB: 60Hz – 22 kHz Réponse en freq. + 3dB/- 9dB :
Impedance: 8 Ohms Impédance :
SPL In Room 1w/1m: 95 dB Sensibilité en salle 1w/1m :
SPL Anechoic 1w/1m: 91 dB Sensibilité Anéchoïque 1w/1m :
X-Over: 2.7 kHz Filtre :
Tweeter: Dual 1” Titanium Transducteur d’aigu :
Woofer: Tripple 5.25” Aluminum Transducteur de grave :
On-wall Dimensions HWD mm: 225 x 677 x 91 Dimensions en saillie HLP mm :
On-wall Dimensions HWD inches: 8.85 x 26.65 x 3.6 Dimensions en saillie HLP inches :
Weight kg each: 8 kg Poids en Kilo chacun :
Weight lbs each: 17.6 lbs Poids en lb chacun :
Product Links:
http://axiomaudio.com/VP150-onwall-speakers.html
is is by far the most important step before we even
begin the installation. Mount the VP150 On-Wall center
channel speaker above or below your TV screen, properly
centered and no farther than 2 feet away. e center speaker
anchors movie dialog and vocals at the TV screen, so keep
it reasonably close to the screen. Avoid corner locations if
possible. Please make sure the speaker wire has a clear path
from your stereo or A/V receiver to the placement of your
speaker.
e Axiom On-Wall Speakers are designed to be installed
on a common stud wall, preferably fastened directly to a
stud. If this is not possible the use of a suitable wall anchor
(not included) will be required.

Step 5 / Étape 5:
16” (406.4mm)
Using a pencil, draw a horizontal line and 2 vertical lines spaced
16 inches (406.4mm) apart at desired speaker location.
Align edges of supplied template to lines on wall. Mark center of each hole though template onto wall.
Pre-screw holes. Wash off pencil lines before installing bracket.
Strip wire 1/4 inch.
Tighten clamps.
NOTE: Only ONE of the two wall
brackets should be wired.
Loosen clamps and insert wires.
Place bracket on the wall and align with holes. Fasten bracket with supplied wood screws.
Place grille on speaker.
Place speaker on bracket and gently push down.
Step 3 / Étape 3:Step 4 / Étape 4:
Step 1 / Étape 1:Step 7 / Étape 7:
Step 8 / Étape 8:
Step 6 / Étape 6:
Step 2 / Étape 2:
Remove brackets from speaker.
Step 9 / Étape 9:
Step 10 / Étape 10:Step 11/ Étape 11: