Axiom ED60P User manual

ED60P
passive point source loudspeaker
USER MANUAL
revision 2023-08-31

2
Watch for these symbols:
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure, that may be of sucient magnitude to constute a risk of electric shock to
persons.
The exclamaon point within an equilateral triangle is intended to alert the user to the presence of important operang and
maintenance (servicing) instrucons in the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instrucons.
2. Keep these instrucons.
3. Heed all warnings.
4. Follow all instrucons.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any venlaon openings. Install in accordance with the manufacturer’s instrucons.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, parcularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use aachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart
is used, use cauon when moving the cart/apparatus combinaon to avoid injury from p-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of me.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Warning: to reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
16. Do not expose this equipment to dripping or splashing and ensure that no objects lled with liquids, such as vases, are placed
on the equipment.
17. To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac receptacle.
18. The mains plug of the power supply cord shall remain readily operable.
19. This apparatus contains potenally lethal voltages. To prevent electric shock or hazard, do not remove the chassis, input
module or ac input covers. No user serviceable parts inside. Refer servicing to qualied service personnel.
20. The loudspeakers covered by this manual are not intended for high moisture outdoor environments. Moisture can damage
the speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to
direct moisture.
21. Keep loudspeakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and nished
surfaces may be degraded by long-term exposure to intense ultra-violet (UV) light.
22. The loudspeakers can generate considerable energy. When placed on a slippery surface such as polished wood or linoleum,
the speaker may move due to its acouscal energy output.
23. Precauons should be taken to assure that the speaker does not fall o a stage or table on which it is placed.
24. The loudspeakers are easily capable of generang sound pressure levels (SPL) sucient to cause permanent hearing damage
to performers, producon crew and audience members. Cauon should be taken to avoid prolonged exposure to SPL in excess
of 90 dB.
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local government oce, for details of where and
how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms
and condions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

3
LIMITED WARRANTY
Proel warrants all materials, workmanship and proper operaon of this product for a period of two years from the original date of purchase. If any
defects are found in the materials or workmanship or if the product fails to funcon properly during the applicable warranty period, the owner
should inform about these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect detailed descripon.
This warranty does not extend to damage resulng from improper installaon, misuse, neglect or abuse. Proel S.p.A. will verify damage on returned
units, and when the unit has been properly used and warranty is sll valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible
for any “direct damage” or “indirect damage” caused by product defecveness.
• This unit package has been submied to ISTA 1A integrity tests. We suggest you control the unit condions immediately aer unpacking it.
• If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspecon.
• Proel is not responsible for any damage that occurs during shipment.
• Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.
• Possible damages to unit should be immediately noed to forwarder. Each complaint for package tampered with should be done within eight
days from product receipt.
CONDITIONS OF USE
Proel do not accept any liability for damage caused to third pares due to improper installaon, use of non-original spare parts, lack of
maintenance, tampering or improper use of this product, including disregard of acceptable and applicable safety standards. Proel strongly
recommends that this loudspeaker cabinet be suspended taking into consideraon all current Naonal, Federal, State and Local regulaons. The
product must be installed be qualied personal. Please contact the manufacturer for further informaon.
DECLARATION OF CONFORMITY
The product is in compliance with:
RoHS Direcve 2011/65/EU and 2015/863/EU, WEEE Direcve 2012/19/EU.
The product is in compliance with:
S.I. 2012/3032 The Restricon of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulaons 2012

4
INTRODUCTION
ED point source systems are designed for indoor and outdoor sound reinforcement applicaons ranging from clubs, bars and
restaurants to theatres, live music venues, houses of worship and theme environments. Passive ED series loudspeaker systems are
easy to set up and simple to operate.
The ED60P consists of an 6.5” LF drive unit and a 1” HF compression driver loaded by an
asymmetric HF horn in a compact enclosure, designed for many multi-purpose sound
reinforcement acvies. The asymmetric HF coverage paern, varying from 120° horizontal in
the lower part of the horn for more eecve near eld coverage, and narrowing to 70° horizontal
at the top of the horn for more focused coverage in the far eld. The result is more accurate
coverage of a typical auditorium than is possible with a xed horizontal coverage device. The
HF horn is also rotatable through 90° by simply removing four screws and realigning the horn,
so that coverage can also be opmised for stage monitor use. This rotatable horn feature also
makes it possible to maintain the ideal coverage paern when the cabinet is installed in a
horizontal (landscape) orientaon. Its asymmetric dispersion paern provides opmal coverage
of typical rectangular venues, with wider dispersion at the front and narrower dispersion at the
rear.
This versale loudspeaker can also be used as a low prole stage monitor with its 35° tapered
side, and in this situaon the HF horn can be rotated to maintain the best coverage paern for
performers both near to and further away from the monitor. ED60P cabinet is an unobtrusive
and compact format designed for a multude of near eld applicaons such as theatre under-
balcony ll, stage front ll, delay speaker, bar and restaurant audio, and discreet stage monitor.
A pole mount socket make this a very versale loudspeaker in both portable and permanently installed applicaons.
TECHNICAL SPECIFICATION
SYSTEM POWER HANDLING
System’s Acousc Principle Two-way Vented Enclosure
Asymmetric Dispersion
Power Handling (AES)* 100 W
Power Handling (program) 200 W
Frequency response 85 Hz – 18 kHz (-6dB)
LF Power Compression
@ -10 dB Power (20 W) = 0.7 dB
Nominal Impedance 16Ω @ -3 dB Power (100 W) = 1.8 dB
Minimum Impedance 13.2 Ω @ 200Hz @ 0 dB Power (200 W) = 3.5 dB
Horizontal Coverage Angle 70 to 120° (-6 dB) ENCLOSURE & CONSTRUCTION
Vercal Coverage Angle 60° (-6 dB) Width 210 mm (8.3”)
Sensivity (4V @ 1m, 2 Pi) 92 dBSPL Height 390 mm (15.3”)
Maximum Peak SPL @ 1m 114 dB Depth 190 mm (7.5”)
TRANSDUCERS Taper angle Stage Monitor: 35° - Fronill: 7.5°
Low frequency transducer 6.5” (165 mm), 1.5” (38 mm) voice coil,
16Ω
Enclosure Material 15 mm phenolic birch plywood
Paint High resistance, black or white water
based paint
High frequency transducer 1” compression driver, 1” (25mm)
aluminium voice coil, PEPT diaphragm, 8Ω Flying System M8 / M6 ying points or dedicated metal
brackets
INPUT CONNECTIONS
Connector Type Neutrik® Speakon® NL4 x 2 Net Weight 5 Kg (11 lbs)
Input Wiring Pin 1+/1- (Pin 2+/2- pass thru)
* AES Pink Noise Connuous Power
h120°
h70°
INDEX
INTRODUCTION ...........................4
TECHNICAL SPECIFICATION ..................4
MECHANICAL DRAWING ....................5
OPTIONAL ACCESSORIES ....................5
SPARE PARTS ..............................5
INPUT ...................................6
LINK .....................................6
HORN ORIENTATION........................6
KPTED60B WALL or TRUSS MOUNTING.........7
KPTLTP WALL MOUNTING ...................7

5
MECHANICAL DRAWING
OPTIONAL ACCESSORIES
KPTED60B Wall or Truss Mounng “C” bracket.
KPTLTP Wall Mounng bracket.
PLH295
PLH295BK
Ø 48-51mm truss tube aluminium half coupler
with M10 x 50 built-in bolt and fastening nut.
Also available with black nish.
NL4FX Neutrik Speakon® PLUG
see hp://www.axiomproaudio.com for detailed descripon and other available accessories.
SPARE PARTS
NL4MP Neutrik Speakon® panel socket 98AXM6W16 6.5’’ woofer - 1.5” VC
91CR0070 ED60P Crossover PCBA 98DRICDX1-1070 1’’ - 1” vc compression driver
21 cm
8.3"
19 cm
7.5"
39 cm
15.3"
Pole Adapter
M8 Flying Point
M8 Flying Point
INSTRUCTION FOR ROTATING THE HORN
1) Remove the speaker grid unscrewing
the four screws indicated below.
2) Unscrew the 4 screws fixing the horn and
rotate the horn by 90°.
turn
90°
Wall
Adapter

6
INPUT
Power input for the external amplier. The ED60P includes a passive crossover for ltering the signal. It includes also an internal
protecon that limits any excessive power to the HF secon and, if the signal persists for a long me, it excludes the HF secon.
The connecons are the following:
INPUT - LINK
NL4 pin number internal connecon
1+ +
1- -
2+ none (pass thru)
2- none (pass thru)
LINK
Power output in parallel with the INPUT socket, for connecng the unit to another
speaker. The number of ED60P cabinets that can be connected in parallel depends
on the amplier load capacity.
HORN ORIENTATION
ED60P features an asymmetrical horn that can be rotated in a few minutes for obtaingn the best coverage according to the speaker
conguraon.
WARNING! CAREFULLY READ THE FOLLOWING INSTRUCTIONS AND CONDITION OF USE:
• For a supplementary safety assure always the loudspeaker to the wall with an alternave rope.
• This loudspeaker is designed exclusively for Professional audio applicaons. The product must be installed by qualied
personal only.
• Proel strongly recommends that this loudspeaker cabinet be suspended taking into consideraon all current Naonal,
Federal, State and Local regulaons. Please contact the manufacturer for further informaon.
• Proel do not accept any liability for damage caused to third pares due to improper installaon, lack of maintenance,
tampering or improper use of this product, including disregard of acceptable and applicable safety standards.
• During assembly pay aenon to the possible risk of crushing. Wear suitable protecve clothing. Observe all
instrucons given on the rigging components and the loudspeaker cabinets. When chain hoists are in operaon ensure
that there is nobody directly underneath or in the vicinity of the load. Do not under any circumstances climb on the array.
VERTICAL POSITION
FOH CONFIGURATION
HORIZONTAL POSITION
FOH CONFIGURATION
HORIZONTAL POSITION
STAGE MONITOR CONFIGURATION
�ght dispersion
long throw
VERTICAL POSITION
FOH CONFIGURATION
�ght dispersion
long throw
VERTICAL POSITION
FOH CONFIGURATION
wide
dispersion
short throw
wide
dispersion
short throw
�ght
dispersion
long throw
HORIZONTAL POSITION
FOH CONFIGURATION
wide dispersion
short throw
�ght dispersion
long throw
HORIZONTAL POSITION
FOH CONFIGURATION
wide dispersion
short throw
�ght dispersion
long throw
�ght dispersion
long throw
wide dispersion
short throw
�ght
dispersion
long throw
HORIZONTAL POSITION
STAGE MONITOR CONFIGURATION
wide dispersion
short throw
�ght dispersion
long throw
HORIZONTAL POSITION
STAGE MONITOR CONFIGURATION
wide
dispersion
short throw
wide
dispersion
short throw
�ght dispersion
long throw
wide
dispersion
short throw

7
KPTED60B WALL or TRUSS MOUNTING
Using the “C” shape bracket the ED60P loudspeaker can be installed to walls or mounted to trusses in combinaon combining with
a PLH295.
It allows to aim the speaker in one direcon (vercal or horizontal) in 7 steps (-22.5°,-15°,-7.5°,0°,+7.5°,+15°,+22.5°).
KPTLTP WALL MOUNTING
This wall mounng bracket allows to aim the loudspeaker in both horizontally and vercally. The horizontal aiming is free with
+/-15° and the vercal aiming is in 4 steps (0°,-15°,-30°,-45°). The loudspeaker can be mounted horizontally or vercally as in the
following gure.

PROEL S.p.A. (World Headquarters) - Via alla Ruenia 37/43 - 64027 Sant’Omero (Te) - ITALY
Tel: [phone] Fax: [phone] www.axiomproaudio.com