AXIOMTEK CAPA313 User manual

4 9418E313000E
© Copyright 2018 Axiomtek Co., Ltd.
Version A1 une 2018
Printed in Taiwan
Quick Start
CN12
The basic procedures required to power on CAPA313:
(1). Require power at minimum 12V/1.07A or 24V/0.63A. Check to
ensure that power supply is OFF before connecting to
CAPA313 and that all necessary peripheral devices are
plugged properly.
(2). Make sure all of the jumpers and switch are at default settings;
especially SSW1 (1-2 close).
(3). Firmly install DDR3L memory module into connector SDIMM1
until fully seated.
(4). Firmly insert power to ATX1.
(5). Install a momentary on/off button/switch onto CN12, pin 5 and
6.
(6). Turn on the power supply.
(7). Press the on/off button/switch to power on CAPA313.
CAPA313 Series Quick Installation Guide
9418E313000E 1
© Copyright 2018 Axiomtek Co., Ltd.
Version A1 une 2018
Printed in Taiwan
Checklist

CPU
b
oard x1

Product information CD
x1

Quick
i
nstallation
g
uide
x1
Connectors
Connector Description
CN1
SMBus Connector
CN2
Audio
Connector
CN4
Digital I/O
Connector
CN5
I
2
C Connector
CN6
COM2 Wafer Connector
CN7 (Optional) COM1 Wafer Connector
CN8
Fan Connector
CN9
SATA Power Connector
CN10
USB 2.0 Wafer Port 5 and 6
CN11
SATA C
onnector
CN12
Front Panel Connector
CN13
LVDS Connector
CN1
4
Inverter Connector
CN16
Ethernet Port 1 and 2
CN17
~CN18
USB 3.0 Port
0~3
CN20
COM1 D
-
Sub Connector
CN21 HDMI Connector
CN22
(Optional)
VGA Connector
ATX1
ATX Power
Connector
SCN1
, SCN3
Full
-
size PCI
-
Express Mini Card Connectors
SCN2
ZIO Expansion
Connector
SDIMM1
DDR3L
SO
-
DIMM Connector
CAPA
31
3
Intel
®
Pentium
®
/Celeron
®
Processor
3.5
”
Board

2 9418E313000E
© Copyright 2018 Axiomtek Co., Ltd.
Version A1 une 2018
Printed in Taiwan
Jumper and Switch Settings
Before applying power to the CAPA313, please make sure all of the
jumpers and switch are in factory default positions.
Jumper/Switc
h Description Setting
JP1
LVDS +3.3V/+5V/+12V Voltage Selection
Default: +3.3V Level 2-4 Close
Restore BIOS Optimal Defaults
Default: Normal Operation 3-5 Close
SSW1 Auto Power On
Default: Disable 1-2 Close
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Board Layout
Top View
Side View
9418E313000E 3
© Copyright 2018 Axiomtek Co., Ltd.
Version A1 une 2018
Printed in Taiwan
Bottom View
Side View
Note: Please refer to the CAPA313 series product information CD for the
complete user’s manual, drivers and utilities. User’s manual and related
documents are in Acrobat PDF format.