Axis A4020-E User manual

AXIS A4020-E Reader
Installation Guide

Read this rst
Read through this Installation Guide carefully
before installing the product. Keep the
Installation Guide for future reference.
Liability
Every care has been taken in the preparation of
this document. Please inform your local Axis
ofce of any inaccuracies or omissions. Axis
ommunications AB cannot be held responsible
for any technical or typographical errors and
reserves the right to make changes to the
product and manuals without prior notice. Axis
ommunications AB makes no warranty of any
kind with regard to the material contained
within this document, including, but not limited
to, the implied warranties of merchantability
and tness for a particular purpose. Axis
ommunications AB shall not be liable nor
responsible for incidental or consequential
damages in connection with the furnishing,
performance or use of this material. This
product is only to be used for its intended
purpose.
Intellectual property rights
Axis AB has intellectual property rights
relating to technology embodied in the product
described in this document. In particular,
and without limitation, these intellectual
property rights may include one or more of
the patents listed at axis.com/patent and one
or more additional patents or pending patent
applications in the US and other countries.
Equipment modications
This equipment must be installed and used
in strict accordance with the instructions
given in the user documentation. This
equipment contains no user-serviceable
components. Unauthorized equipment changes
or modications will invalidate all applicable
regulatory certications and approvals.
rademark acknowledgements
AXIS OMMUNI ATIONS, AXIS, ARTPE and
VAPIX are registered trademarks of Axis AB in
various jurisdictions. All other trademarks are
the property of their respective owners.
Regulatory information
Europe
This product complies with the applicable
E marking directives and harmonized
standards:
•Electromagnetic ompatibility
(EM ) Directive 2014/30/EU. See
Electromagnetic compatibility (EMC) on
page 2 .
•Radio Equipment Directive (RED)
2014/53/EU. See Radio transmission on
page 3 .
•Low Voltage Directive (LVD) 2014/35/EU.
See Safety on page 4 .
•Restriction of Hazardous Substances
(RoHS) Directive 2011/65/EU and
2015/863, including any amendments,
updates or replacements. See Disposal
and recycling on page 4 .
A copy of the original declaration of conformity
may be obtained from Axis ommunications AB.
See Contact information on page .
Electromagnetic compatibility
(EMC)
This equipment has been designed and tested to
fulll applicable standards for:
•Radio frequency emission when installed
according to the instructions and used in
its intended environment.
•Immunity to electrical and
electromagnetic phenomena when
installed according to the instructions
and used in its intended environment.
USA
This device complies with part 15 of the F
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
This equipment has been tested and found to
comply with the limits for a lass B digital
device, pursuant to part 15 of the F Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
•Reorient or relocate the receiving
antenna.
•Increase the separation between the
equipment and receiver.
•onnect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
•onsult the dealer or an experienced
radio/TV technician for help.

The product shall be properly grounded.
Contact information
Axis ommunications Inc.
300 Apollo Drive
helmsford, MA 01824
United States of America
Tel: [phone]
Canada
This digital apparatus complies with
AN I ES-3 ( lass B). The product shall be
properly grounded. et appareil numérique est
conforme à la norme AN NMB-3 (classe B). Le
produit doit être correctement mis à la terre.
Europe
This digital equipment fullls the requirements
for RF emission according to the lass B limit
of EN 55032. The product shall be properly
grounded.
Australia/New Zealand
This digital equipment fullls the
requirements for RF emission according to the
lass B limit of AS/NZS ISPR 32. The product
shall be properly grounded.
Japan
この装置は、クラスB機器です。この装置は、住宅環境で使⽤することを⽬的としていますが、この装置がラジオやテレビジョン受信機に近接して使⽤されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いをして下さい。VCCI-BKorea
이 기기는 가정용(B급) 전자파적합기기로
서 주로 가정에서 사용하는 것을 목적으
로 하며, 모든 지역에서 사용할 수 있습니
다. 제품은 적합하게 접지 되어야 합니다.
상호: AXIS OMMUNI ATIONS AB
기자재명칭 : RFID용 무선기기(13.56㎒ 주
파수 대역)
모델명 : AXIS A4020-E
제조연월 : 2021년06월
제조자,제조국가: AXIS OMMUNI ATIONS
AB / 태국
Radio transmission
This equipment may generate or use radio
frequency energy. The user could lose the
authority to operate this equipment if an
unauthorized change or modication is made.
USA
This product complies with F radiation
exposure limits for an uncontrolled
environment.
Canada
This device complies with Industry anada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
This product complies with I radiation exposure
limits for an uncontrolled environment.
Le présent appareil est conforme aux NR
d'Industrie anada applicables aux appareils
radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
e produit est conforme aux limites d'exposition
aux radiations I pour un environnement non
contrôlé.
Europe
Hereby, Axis ommunications AB declares that
this product is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU.
FR
Par la présente Axis ommunications AB déclare
que l’appareil ce produit est conforme aux
exigences essentielles et aux autres dispositions
pertinentes de la directive 2014/53/UE.
DE
Hiermit erklärt Axis ommunications AB, dass
sich dieses Produkt in Übereinstimmung mit
den grundlegenden Anforderungen und den
anderen relevanten Vorschriften der Richtlinie
2014/53/EU bendet.
IT
on la presente Axis ommunications AB
dichiara che questo prodotto è conforme ai
requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 2014/53/UE.
ES
Por medio de la presente Axis ommunications
AB declara que el este producto cumple con
los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la
Directiva 2014/53/UE.
FI
Axis ommunications AB vakuuttaa täten
että tämä tuote tyyppinen laite on direktiivin
2014/53/EU oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
N
Hierbij verklaart Axis ommunications AB
dat het toestel in overeenstemming is met
de essentiële eisen en de andere relevante
bepalingen van richtlijn 2014/53/EU.
SV
Härmed intygar Axis ommunications AB
att denna produkt står i överensstämmelse

med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv
2014/53/EU.
DA
Undertegnede Axis ommunications AB
erklærer herved, at følgende udstyr overholder
de væsentlige krav og øvrige relevante krav i
direktiv 2014/53/EU.
PT
Axis ommunications AB declara que este
produto está conforme com os requisitos
essenciais e outras disposições da Directiva
2014/53/UE.
E
Με την παρούσα η Axis ommunications AB
δηλώνει ότι αυτό το προϊόν συμμορφώνεται
προς τις ουσιώδεις απαιτήσεις και τις
λοιπές σχετικές διατάξεις της οδηγίας
2014/53/EE.
This equipment can be used in the
following countries:
AT, BE, BG, H, Y, Z, DE, DK, EE, EL, ES, FI, FR,
HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL,
PT, RO, SE, SI, SK, TR, UK
Australia/New Zealand
This digital equipment fullls the requirements
of the Radio ommunications Standard
AS/NZS 4771.
Korea
해당무선설비는운용중전파혼신가능성
이있음로인명안전과 관련된 서비스는할
수없습니다
Taiwan
取得審驗證明之低功率射頻器材，⾮經核准，公司、商號或使⽤者均不得擅⾃變更頻率、加⼤功率或變更原設計之特性及功能。低功率射頻器材之使⽤不得影響⾶航安全及⼲擾合法通信；經發現有⼲擾現象時，應⽴即停⽤，並改善⾄無⼲擾時⽅得繼續使⽤。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或⼯業、科學及醫療⽤電波輻射性電機設備之⼲擾。Japan
本製品は、特定無線設備の技術基準適合証明を受けています。Brazil
Este produto está homologado pela ANATEL, de
acordo com os procedimentos regulamentados
pela Resolução 242/2000 e atende aos
requisitos técnicos aplicados.
000
Este equipamento não tem direito a proteção
contra interferência prejudicial e não pode
causar interferência em sistemas devidamente
autorizados.
Para maiores informações, consulte o site da
ANATEL www.anatel.gov.br.
Mexico
La operación de este equipo está sujeta a las
siguientes dos condiciones:
1. Es posible que este equipo o dispositivo
no cause interferencia perjudicial.
2. Este equipo o dispositivo debe aceptar
cualquier interferencia. Incluyendo la que
pueda causar su operación no deseada.
Thailand
Safety
This product complies with IE /EN/UL 62368-1,
safety of audio/video and IT equipment, and
IE /EN/UL 60950-22, Safety of Information
Technology Equipment.
Disposal and recycling
When this product has reached the end of its
useful life, dispose of it according to local laws
and regulations. For information about your
nearest designated collection point, contact
your local authority responsible for waste
disposal. In accordance with local legislation,
penalties may be applicable for incorrect
disposal of this waste.
Europe
This symbol means that the product shall
not be disposed of together with household

or commercial waste. Directive 2012/19/EU
on waste electrical and electronic equipment
(WEEE) is applicable in the European Union
member states. To prevent potential harm
to human health and the environment, the
product must be disposed of in an approved
and environmentally safe recycling process.
For information about your nearest designated
collection point, contact your local authority
responsible for waste disposal. Businesses
should contact the product supplier for
information about how to dispose of this
product correctly.
This product complies with the requirements
of Directive 2011/65/EU and 2015/863 on the
restriction of the use of certain hazardous
substances in electrical and electronic
equipment (RoHS).
China
This product complies with the
requirements of SJ/T 11364-2014, Marking
for the restriction of hazardous substances in
electrical and electronic products.
有毒有害物质或元素
部
件
名
称
铅
(
P-
b)
汞
(
H-
g)
镉
(
-
d)
六
价
铬
(
-
r(
V-
I))
多
溴
联
苯
(
P-
B-
B)
多
溴
二
苯
醚
(
P-
B-
D-
E)
电
气
实
装
部
分
X00000
0: 表示该有毒有害物质在该部件均质
材料中的含量均在GB/T 26572标准规定
的限量要求以下。
X: 表示该有毒有害物质至少在该部
件的某一均质材料中的含量超出GB/T
26572标准规定的限量要求。
Taiwan
Declaration of the Presence ondition of the
Restricted Substances Marking.
限用物質含有情況標示
設備名稱：讀卡機 型號（型式）：
AXIS A4020-E
限用物質及其化學符號
單
元
鉛
(
P-
b)
汞
(
H-
g)
鎘
(
-
d)
六
價
鉻
(
-
r+
6)
多
溴
聯
苯
(
P-
B-
B)
多
溴
二
苯
醚
(
P-
B-
D-
E)
電
路
板
-
外
殼
積
體
電
路
-
備考1.〝超出0.1 wt %〞及〝超出0.01
wt %〞係指限用物質之百分比含量超
出百分比含量基準值。
備考2.〝〞係指該項限用物質之百
分比含量未超出百分比含量基準值。
備考3.〝－〞係指該項限用物質為排
除項目。
Contact information
Axis ommunications AB
Gränden 1
223 69 Lund
Sweden
Tel: [phone]
Fax: [phone]
axis.com
Taiwan
品名:讀卡機
型式: AXIS A4020-E
額定輸入: 12V

製造國別:波蘭
委託商: Axis ommunications
1:
進口商:零壹科技股份有限公司
地址:台北市內湖路一段360巷8號10樓
電話: [phone]
2:
進口商:精技電腦股份有限公司
地址:台北市內湖區新湖二路236號3樓
電話: [phone]
Warranty information
For information about Axis’ product warranty
and thereto related information, go to
axis.com/warranty.
Support
Should you require any technical assistance,
please contact your Axis reseller. If your
questions cannot be answered immediately,
your reseller will forward your queries through
the appropriate channels to ensure a rapid
response. If you are connected to the Internet,
you can:
•nd answers to resolved problems in
the FAQ database, search by product,
category, or phrase
•report problems to Axis support staff by
logging in to your private support area
•chat with Axis support staff
•visit Axis Support at axis.com/support
Learn more!
Visit Axis learning center axis.com/learning for
useful trainings, webinars, tutorials and guides.

AXIS A4020-E Reader
Requirements for compliance with UL294 7th
edition
This section contains information and instructions required for UL
compliance. To make sure the installation is UL compliant, follow the
instructions below in addition to the general information and instructions
provided throughout this document. In cases where pieces of information
contradict each other, the requirements for UL compliance always replace
general information and instructions.
For use with the UL294 listed AXIS A1601 Network Door ontroller.
Safety instructions
• The Axis product shall be installed and serviced by a factory
trained professional.
• All wiring methods shall be performed in accordance with
ANSI/NFPA 70, local codes and authorities having jurisdiction.
• Recommended test method: Verify that the card reader reads
cards and provides access.
Test frequency: once a year.
• There are no replacement parts available for this product.
• For UL294 compliant installations the AXIS A4020-E Reader
should be powered by either an AXIS A1601 Network Door
ontroller or a UL294 listed power supply. All interconnecting
devices shall be UL listed and lass 2 low-voltage power
limited.
• D input evaluated for UL294: 12 V D
Impaired operation
The following conditions could result in impaired operation of the reader:
The reader can have difculties reading cards at very low temperatures.
The access cards are normally specied to -35°(-31°F) and should be
warmed up if the reader is installed in cold surroundings. The reader can
only read one card at a time. Sheet metal behind the access card can
7

AXIS A4020-E Reader
result in impaired antenna function and prevent the reader from reading
the card. Too low voltage will impair the function of the reader.
Firmware version
AXIS A4020-E Reader has been tested for compatibility with the
UL294-listed AXIS A1601 Network Door ontroller employing major
rmware version 1. Equivalent to other Axis door controllers with major
rmware version 1, as well as UL component version 1 in other Axis door
controller rmwares.
Performance levels for access control
This section contains performance level information required for UL 294
compliance.
Feature evel
Destructive attack test I
Security I
Endurance IV
Standby power I
Wire area
Note
Each wire shall have a conductor cross-sectional area that
corresponds to an conductor gauge range of AWG 26–18. Select
cables in compliance with your local regulations.
AWG Diameter mm (in) Area mm2
26–18 0.405–1.024 (0.0159–0.0403) 0.129–0.823
8

AXIS A4020-E Reader
9

AXIS A4020-E Reader
10

AXIS A4020-E Reader
11

AXIS A4020-E Reader
12

AXIS A4020-E Reader
13

AXIS A4020-E Reader
14

AXIS A4020-E Reader
15

AXIS A4020-E Reader
16

AXIS A4020-E Reader
17

AXIS A4020-E Reader
18

AXIS A4020-E Reader
19

AXIS A4020-E Reader
20