AYAMA SAHARA User manual

User manual
AYAMA SEGUTEL
c/ Montserrat Roig nº18 - 08310 ARGENTONA (Barcelona)
Tel.: [phone]
www.ayama.com comer[email protected]
facebook.com/ayama @ayama
Ver la declaración de conformidad en:
http://www.ayama.com/declaration-of-conformity
PA17042A
Date: Reference:
Warranty conditions - GENERAL CONDITIONS OF SALE
The manufacturer warrants that their products will be free from defects of work-
manship for 2 years from the date of purchase, excluding from warranty that dama-
ge caused from delivery, misuse or normal wear and tear incurred during use.
- Warranty will neither include damage caused from electric discharge or inappro-
priate use of the material. Warranty will be void in case of external factors such as
power surge or power fall, use of inappropriate or prohibited accessories, damage
- The responsibility of the manufacturer will be limited to substitute or repair the
faulty parts during the warranty period. Under no circumstances the manufacturer
will be responsible for damages or loss beyond the value of the equipment itself,
the loss of animals, equipment or lost time.
- Similarly, the manufacturer accepts no judicial responsibility for malfunctions or
accidents and everything that might arise directly or indirectly from the misuse of
our materials, whether in warranty or not.
- During the warranty period, in case of return for repair, customers will have to
make their own arrangements through any postal carrier and pay the freight. The
manufacturer will send the goods back to the customer prepaying the shipment.
- Faulty products will be repaired or replaced according to the validity of the
warranty. In case of claim, purchase invoice, original wrapping and manuals will be
required.
- Warranty will be void in case of product opening or manipulation. In order to
the manufacturer company.
- This warranty does not include the repair and replacement of products from other
companies, nor replaceable parts such as antenna or lid. These products will only
have the warranty offered by their respective manufacturer companies; as long as
- In case of any malfunction, we advise you to contact our staff and not use the
device in order to protect your animal’s security.
S/N:

Transmitter ON/OFF
It is important to keep contacts clean to prevent dirt connection failures, the-
se can be cleaned with a damp cloth with alcohol, making sure that no rem-
nants of any kind.
The antenna should not be cut or folded to get the maximum range.
For correct operation of the altimeter is important to check that the hole is not
blocked, if he were Clear it with the tip of a pin.
Maintenance
1
3 s.
Insert in charger
MicroUSB cable connector
Full charge 2.5 hours.
To turn ON/OFF the transmitter just bringing the magnet close to the symbol
as indicated in the ON/OFF diagram , the LED will green twice when ON
and when OFF the LED will violet.
PERP: ≤10 mW
Banda UE /AUS/NZ (433.050-434.750 MHz)
Work Temp. : -10 a 50 ºC
Stock Temp. : -20 a 70 ºC
Weight: 11.4 gr.
Autonomy: 2-3 continuous days
Index of protection (mod.barometric): IP40 (NO WATERPROOF)
Index of protection (mod.GPS): IP68
2
General overview
Antenna
(Unscrew to replace)
Clip for tail or harness
Marking the channel and Serial No.
LED Light indicador
mode and charge
Charge contacts
Channel
3.525
985X559