Azio CAR102-I31 User manual

AZiO™ USB 2.0 Internal Multi-Card
Reader/Writer
Quick Start Guide
Models:
CAR102-I31
CAR102-I51

OVERVIEW
Thank you for purchasing the AZiO USB 2.0 internal Multi-
Card Reader/Writer, one of the most stylish and practical
internal flash memory card reader/writer solutions
available. This internal multi-card reader kit is very easy
to install, is memory card hot-swappable, and is backed by
AZiO Corporation’s 1-year Limited Warranty.
This Quick Start Guide is designed to get you up and
running in the least amount of time possible. If you
experience a problem with your AZiO product, please visit
our product support page at:
www.aziocorp.com/support.php
Here you can access product FAQ’s, LiveChat support, or
Customer Care contact information. Thank you again for
choosing AZiO and we sincerely hope you enjoy using your
new multi-card reader.
PACKAGE CONTENTS
When you unpack your external drive kit, be sure you
have removed all the accessories and information papers.
The items shown below are included with your drive kit:
1. Internal Multi-Card Reader/Writer
2. Quick Start Guide
3. Installation Screws

CARD READER/WRITER INSTALLATION
[STEP 1]
First power off your computer and then remove the
computer’s cover. Install the Multi-Card Reader/Writer into
an available 3.5” drive bay of your computer.

[STEP 2]
Securely fasten the Multi-Card reader to the drive bay with
the supplied mounting screws.

[STEP 3]
Connect the card reader’s 4-pin USB connectors to the
motherboard’s internal USB pin-out headers according to
its pin assignments.
On most motherboards, the USB header / pin-out consists
of 9 pins arranged in 2 rows and each header allows for 2
USB connects (i.e. USB1 and USB2). Normally, the pins for
USB1 and USB2 are in separate rows.
Replace the computer’s cover and reconnect the power
cord. The Hardware installation is complete.

SOFTWARE INSTALLATION
USB 2.0 Driver Installation
•For Windows XP, Windows 2000, Windows ME,
MAC OS 9.x and MAC OS 10.x or higher, no
drivers are required.
•For Windows 98SE, please visit our website at
www.aziocorp.com/support.php and download the
corresponding driver.
1. Unzip the driver file and run the setup file.
2. Follow the installation wizard until setup is
completed.
3. Restart your computer.
4. Your Multi-Card Reader is now ready for use.

SERVICE & WARRANTY
Service
If you need assistance with the product, please check the
comprehensive user’s manual included in the software CD
or visit our website at www.aziocorp.com for frequently
asked questions and troubleshooting tips. Otherwise, you
may contact our dedicated customer care team.
There are several ways to contact us:
By Phone: [phone]
By Email: [email protected]
On LiveChat: www.aziocorp.com

Warranty
Limited 1 Year Warranty
AZiO Corporation warrants this product against defect in
material or workmanship for 1 year from the date of
purchase. If this product proves to be defective, contact
AZiO Corporation’s customer care for repair or
replacement of your unit. Return requests can not be
process without the proof of original date of purchase. This
warranty applies only to the original purchase of the
product and is not transferable. This warranty does not
cover any incompatibilities due to the user’s computer,
hardware, software or related system configuration in
which the product interfaces. The warranty does not cover
any damage caused by negligence, abuse, or non-
authorized modifications. To the maximum extent
permitted by applicable law, in no event shall AZiO
Corporation, its affiliates, or its dealers be liable for any
special, incidental, indirect or consequential damages
whatsoever regardless of cause or form of action.

FCC Information
FCC Compliance Statement
This equipment has been tested and found to comply with
the limits for a Class B Digital Device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and if not installed
and used in accordance with the instruction manual may
cause harmful interference to radio communication.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment
and receiver.
•Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio TV
technician for help.