Aztech APC2100 Instructions for use

PLEASE RETAIN THIS EASY START GUIDE FOR FUTURE USE.
APC2100
Electric Pressure Cooker
EASY START GUIDE
PACKAGE CONTENTS
Pressure Cooker Measuring Cup Rice Spoon Power Cord
Easy Start Guide Warranty PolicyUser Manual
USING THE PRESSURE COOKER
TIPS BEFORE USING YOUR PRESSURE COOKER
• It is STRONGLY ADVISED to ensure that you have read all provided safety guides and
operating instructions in the USER MANUAL BEFORE PROCEEDING.
• Before use, please check if the power voltage of your Pressure Cooker correctly corresponds
to your home’s power supply.
• Should damages be found on the appliance, its power cord and/or its other components
– do not use the appliance and immediately bring it to the Aztech Service Center for repair
or replacement.
• Do not, in any kind of manner, disassemble, dismantle, and/or perform appliance repair on
your own and/or replace its components using non-Aztech approved components.
• While the inner pot is discharging steam and/or pressure, avoid coming contact with its
Pressure Safety Valve to prevent injuries.
• AFTER COOKING, DO NOT FORCEFULLY OPEN THE PRESSURE COOKER’s LID. Ensure to FULLY
discharge any remaining steam and/or pressure rst through its Pressure Release button
before opening the lid.
• Your Aztech Electric Pressure Cooker is not intended for people with reduced physical, sensory
or mental capabilities, and/or lack of experience or knowledge. Constant supervision (from
a person responsible for their safety) should be provided if such individuals would be using,
cleaning, or operating, the appliance.
STEP 2
Remove the Inner Pot from the main body then
pour/place the required ingredients.
STEP 1
Hold the Lid Handle and turn it counter clockwise
to unlatch the lid before lifting it away from the
main body.

PLEASE RETAIN THIS EASY START GUIDE FOR FUTURE USE.
Additional Notes:
• Ingredients should not exceed the 4/5 (MAX)
mark of the inner pot.
• If the ingredients expand upon cooking (e.g.
rice, beans, etc.), use the 3/5 mark.
• Do not overll the pot with ingredients to
avoid clogging the pressure relief valve during
operation.
STEP 5
Place the Pressure Safety Valve then press the
Pressure Release button and ensure that the
pressure release button is UP. It is also important
to ensure that the Pressure Safety Valve is properly
eased into place.
Plug the appliance’s power adapter into a power
outlet. Your pressure cooker’s digital display will
show 00:00 to indicate that the appliance is in
STANDBY mode.
STEP 6
STEP 4
NOTE: Ensure that the Lid Sealing Belt is properly
secured into the lid.
Lower the lid into the main body and use the lid
handle to rotate the lid clockwise until it securely
locks into place.
Press the MENU button to select a cooking
function,thenpresstheSTARTbuttontoconrm.
The appliance would now start cooking.
NOTE: You may refer to the USING THE CONTROL
PANEL section of the User Manual for more
detailed instructions.
STEP 7
After cooking, Allow the pressure cooker to cool
downfor15minutesorwaitfortheoatervalveto
completely ease down into the lid.
STEP 8
Press the Pressure Release button to fully empty
the inner pot’s steam/pressure content. You may
now unplug the pressure cooker and empty its
contents.
STEP 9
Wipe off dirt or moist from the pot’s bottom
surface and the main body’s heating plate, then
ease in and slightly rotate the pot to ensure that
its bottom is directly in contact with the heating
plate.
STEP 3