Aztech WL852RT4 Manual

P R O D U C T E N G I N E E R I N G A N D S
U P P O R T
S i n g a p o r e
A Z T E C H T E C H N O L O G I E S P T E L T D
Aztech WL852RT4
150Mbps 4-Port Wireless-N Wireless Router
Step-by-step i structio guide to setup your WL852RT4 with a cable modem
1. Make sure that both the cable modem and the WL852RT4 are switched off.
2. Setu the hysical connections between the cable modem, WL852RT4 and your PC.
3. Turn on the WL852RT4.
4. Click Start > Run. Ty e cmd on the o en box and click Ok.
5. Ty e i config and ress Enter to verify if your c can get an IP address from the WL852RT4.

F r e q u e n t l y A k e d Q u e t i o n Page 2 of 3
P R O D U C T E N G I N E E R I N G A N D S U P P O R T
S i n g a p o r e
A Z T E C H T E C H N O L O G I E S P T E L T D
6. Turn on the cable modem and wait for the Online LED to become steady.
7. O en your Internet browser and login to the web GUI by ty ing htt ://192.168.1.1.
8. Enter ‘admin’ in the username and assword rom t.

F r e q u e n t l y A k e d Q u e t i o n Page 3 of 3
P R O D U C T E N G I N E E R I N G A N D S U P P O R T
S i n g a p o r e
A Z T E C H T E C H N O L O G I E S P T E L T D
C o n f i d e n t i a l D o c u m e n t
9. Click the renew button to obtain a WAN IP address from the network.
10. Verify if you are able to get an IP address.