Aztech WL950RT4 Operating and installation instructions

WL950RT4 ADDENDUM
A. For the latest firmware version please visit our website http://www.aztech.com
B. If your ADSL Modem router has an IP address of 192.168.1.x, WL950RT4 LAN IP address will
automatically change to 10.0.0.2 whenever it detects a conflict behind the ADSL Modem that is
using a PPPoE connection
C. In Wireless Security, when you select WPA2-PSK encryption to achieve a maximum speed of
300mbps. When using a WEP 64/128/152-bit encryption, wireless client speed may display
54mbps only though the throughput is higher than what is displayed
HOW TO CHECK THE CURRENT FIRMWARE IN YOUR WL950RT4
1. Open Internet Explorer browser
2. Type 192.168.1.254 or 10.0.0.2 (if item B above is satisfied) on the address bar in your internet
explorer browser
3. Type Username: admin Password: admin and press login
4. The screenshot below is the status page that indicates the latest current firmware version used
HOW TO UPGRADE THE FIRMWARE
1. Go to Advance then click Firmware Upgrade.
2. Screenshot below is for the Firmware upgrade page.
3. Click on Browse, select the AzTech_WL950RT4_1.x.x.x.img file and click Upload.