B. Braun BBM User manual

B C
INSERTING THE BOTTLE
1. Remove protective cap
HOW TO USE
Via cover
ADDITIONAL FEATURES
Adjustable rotary disc indicator with
„care“, „disinfect“ and „clean“ settings.
Fill level
inspection
window.
General care instructions:
Do not use corrosive, abrasive or chlorine-based detergents to clean the dispenser.
We recommend you clean it with a low-alcohol detergent/ disinfectant such as Meliseptol®
Wipes Sensitive. It can also be cleaned in a cleaning and disinfection unit or a dishwasher.
However, do not wash it at machine temperatures exceeding 60 °C.
Do not autoclave the dispenser!
Adjustable dispensing
volume with three settings.
0.6 ml
1.5 ml
3 ml
Via arm lever
2. Unlock cover
3. Open / remove cover
Open by pressing gently
To remove the cover
completely, press rmly
(as far as it will go).
4. Insert the bottle
5. Release air
6. Close dispenser
and lock cover
Click

3
1
2
1
2
1
2
3
4
A
WALL MOUNTING WITH BACK PLATE
1. Secure with screws
(compatible with a variety
of commercially available
dispenser hole patterns) cap
INCLUDED IN DELIVERY
Manual dispenser
including installation
ttings (3908452)
ATTACHING OPTIONAL ARM LEVER
Insert arm lever in retainer
When putting on the cover,
lift the lever upwards.
IC2712_1106_02.19 GIF-3908452-V1
ATTACHING OPTIONAL
DRIP TRAY
OPTIONAL COMPONENTS
Drip tray
(3908453)
BBM MANUAL WALL DISPENSER
500 / 1000 ml
Article no.: 3908452
Arm lever
(3908454)
Technical Data: Cover: ABS/SAN/ Drip tray (optional): ABS / Arm
lever (optional): stainless steel / Universal & NHS back plate
(optional): ABS / Installation pack: wall plugs, screws, spacers
(4 of each) / Dimensions of basic kit: W 120(135) x H 305 x
135 / Total weight of basic kit: approx. 500 g Arm
lever
Indicator
window
Level
inspection
window
Back plate
B.Braun Medical AG
Seesatz 17
6204 Sempach
Switzerland
IMPORTANT! Please carefully read the operating instructions and save
them for reference. The proper function of the dispenser system can
only be guranteed if the procedures in these instructions are followed.
Cover
WALL MOUNTING
WITHOUT BACK PLATE
1. Put spacers in place
2. Secure with screws
REMOVAL FROM
BACK PLATE
Press tab (1) and remove
dispenser in direction
of arrow (2 – 4)
2. Attach dispenser
to back plate.
Back plate univ. (l)
/ NHS (r) (3908459)
/ (3908471)
Install the dispenser above or next to a washbasin. If this is not possible, make sure that the
contents are prevented from dripping on the oor.
Min. clearance at top: 100 mm (opening) / 20 mm (removal)
Min. clearance underneath: 60 mm / 130 mm (drip tray)
Suitable installation height: approx. 1,200 mm (from oor to bottom edge of dispenser)
Click
Click
More Languages on / Translations on:
www.bbraun.com/en/products/b1/b-braun-dispensermanual.html