
NEEDASSISTANCE?
Pleasecontactourcustomersupportat(847)763-1215andwe’llbehappytoassistwithany
assembly questions, comments or concerns.
ROSSETO®3600WestPrattAve.Lincolnwood,IL60712
Cleaning Instructions:
1) Gently disassemble all parts of unit as indicated below
2) Wash all parts in warm soapy water (never use abrasive sponge or cloth)
3) Reassemble unit only after all parts are completely dry (see assembly instructions below)
Multi-Cone Container Disassembly (Please use image & part #’s on reverse side as guide):
1)CarefullyremoveMulti-ConeContainerfromMulti-ConeWallBracketata
45°angleaspicturedonreverse(fig.B)
2) Remove MC Lid (1) from top of Container plus any remaining product
3)RemoveMCHandleClip(8)fromMCHandle(7)atthebackofcontainer
4) Gently remove MC handle from the front of the container
5)Reachintocontainerandremovepaddlewheel(2,3or4)bygentlypullingupwardsor
turning container upside down
6) Disassembly Complete!
Multi-Cone Container Assembly:
1)Beforeassembling,choosepreferredpaddlewheelforyourspecificapplication
2) Place paddle wheel (2,3 or 4) into container, making sure the holes of the paddle wheel
align with the container’s holes
3) Insert handle through front of container making sure to push through paddle wheel and
through the back of the container
4) Place MC Handle Clip (8) on back end of Handle shaft (make sure the words “This side
out” are facing out)
5)FillcontainerwithdesireddryproductandplaceMCLid(1)onContainer
6)Withhandlefacingyou,insertcontainerintoMulti-ConeWallBracketat
a45°AngletoensurecontainerfitsaroundLabelholderaspicturedonreverse(fig.B).
a.BackofContainerhassmallkeythatalignswithbracketnotchtoprevent
movement from side to side.
7)DispenseAsYouPlease!
How to Interchange Paddle Wheels:
REMOVE:
1) Remove MC handle Clip from back of container.
2) Pull MC Steel Handle out through front of container.
3) Remove Paddle Wheel
INSERT:
1) Place preferred Paddle Wheel into container; making sure the holes of the
paddle wheel align with the container’s holes.
2) Insert handle through front of the container, making sure to push through
paddle wheel, and the back of the container.
3) Place MC Handle Clip (8) on back end of handle shaft (make sure
the words “This side out” are facing out).