B-Tech BT7004 User manual

BT7004
bolt down Digital Signage mount
WITH SCREEN ENCLOSURE
INSTALLATION GUIDE
• Max load: 50kg (110lbs)
• Suitable for screens with VESA®and non-VESA xings
• Base dimensions: W: 240mm D: 240mm
• Vented top and bottom panels allow airow to
and from the device
• Integrated cable management
• Simple ‘hook-on’screen installation with all mounting
hardware included
SPECIFICATIONS
www.btechavmounts.com
B-TECH AV mounts

BT7004 PARTS LIST
PLEASE KEEP THIS FOR FUTURE REFERENCE
4
B3
A1
F1
E1
C1
A2
B1
B2
D2
D1
G1
G2
E2
B4
Note: Components supplied may dier from what is shown depending
on the type and size of the display being installed.

7
3.
ATTACH MOUNTING BRACKET TO RAIL
i. Insert 4 x item C2 into item E1 (2 in the top channel, 2 in the bottom channel).
ii. Fix item C1 centrally to item E1 using item C3.
i. Insert 4 x item D1 into item B1 (2 in each channel).
ii. Attach item C1 to item B1 using item D2. Leave a 6mm gap at top of the column.
4.
FIX RAIL TO COLUMN
E1
C1
C2
C3
6mm
(Excluding
end cap)
C1
B1
E1
D1
D2

9
7.
FIX SCREEN ENCLOSURE
i. Insert 8 x item G5 into item E1 (4 in the top channel, 4 in the bottom channel)
and position as shown in g. 1.
ii. Attached item E2 to the ends of item E1.
110mm 110mm
110mm
g.1
E2
G5
G5
E1
G4
G1
G2
E1
iii. Connect items G1 & G2 around the screen and secure to item E1 using item G4.

BT7004 DIMENSIONS
PLEASE KEEP THIS FOR FUTURE REFERENCE
11
THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO
LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
TOP VIEW
BASE PLATE
SIDE VIEW
FRONT VIEW
REAR VIEW
174mm
165mm
86mm
4 x
10.5mm
240mm
240mm
600mm600mm600mm
72mm
40mm
80mm
30mm
Max Height depends on screen size
Width dependent on screen size
1237.1mm
428mm
400mm
300mm
200mm
1606mm
1808mm
1800mm
6mm
Depth dependent on screen size
180.7mm
43.5mm

For More Information Visit www.btechavmounts.com
B-TECH AV mounts
AMA-BT7004-V1-0221-BTECH MADE IN VIETNAM
©2021 B-Tech AV Mounts. All rights reserved.
B-Tech AV Mounts is a division of B-Tech International Design and Manufacturing Ltd.
B-Tech AV Mounts and the B-Tech logo are registered trade marks.
All other brands and product names are trademarks of their respective owners.
Photographs are for illustrative purposes only. E&OE.
CONTACT:
[email protected]