B.Well PRO-166 User manual

Instructions for use
EN
PRO-166
Electronic
Personal Scale

2
Instructions for use PRO-166
1. INTRODUCTION
Dear consumer!
We congratulate you with a B.Well electronic personal scale buying!
Thank you for choosing our product!
Product was developed, verified and supervised by B.Well Swiss AG, Switzerland.
Applied Swiss control system assures high quality, endurance and safety of all B.Well products.
This new electronic personal scale allows you to evaluate your body weight. Capacity 180 kilos,
divided into 100 grams.
Please read through these instructions carefully so that you understand all functions and safety
information. We want you to be happy with your B.Well product.
The B.Well company is guaranteeing that this scale is made of high quality materials and meets
current national and international safety standards.
2. OPERATING INSTRUCTION
Place the scale on a hard, flat surface will ensure on the greatest accuracy and repeatability. Soft,
inaccurate flooring (e.g. rugs, carpets, linoleum) can cause the scale to give uneven reading of your
weight.
Stepping onto the scale then the number on LCD flash 3 times, that is the weighing result of your
body. (Step onto the scale with your feet parallel and weight equally distributed)
Stand still while the scale measures your weight.
Always weigh yourself on the same scale each day at the same time, preferably undressed and
before breakfast.
The surface of the scale can be slippery, if wet.
3. USING THE SCALE FOR THE FIRST TIME
How to insert the battery
This scale operates with one replaceable lithium battery.
Please insert batteries or remove the insulating strip from the battery
contacts before using. Replace the batteries when the “Low Battery Indicator”
shows.
If the scale would not be used in a long period, please take the battery out,
and make sure there is nothing on the scale.
KG / LB / ST Switch
Located at the bottom of the scale, this switch allows you to choose the unit
of measurement for weighing: kg, lb or st.
Use as simple scale
1. In order to get accurate measurements, place the scale on a firm
level floor.
2. Step onto the scale and wait without moving; after a few seconds, the
display screen will show your weight.
Do not lean on anything while being weighed as this could alter the
reading.

3
Instructions for use PRO-166
3. Step off the scale, the display screen will continue to show your weight for
a few seconds then it will turn off automatically.
4. When the scales are overloaded (over 180 kg / 396 lb / 28 st), the following
will appear on the screen:
4. SAFETY, CARE, ACCURACY TEST AND DISPOSAL
This device may only be used for the purposes described in these instructions. The
manufacturer cannot be held liable for damage caused by incorrect application.
This device comprises sensitive components and must be treated with caution. Observe the
storage and operating conditions described in the “Technical Specifications» section.
Protect the scale against knocks, damp, dust, chemicals, drastic changes in temperature,
electromagnetic field and source of heat that are too near.
Never open this device.
If the scale would not be used in a long period, please take the battery out, and make sure there
is nothing on the scale.
Keep packaging material away from children!
Never step onto the outer edge of the scale with one foot as this could cause the scales to tip!
Device care
You can clean the scale with a damp cloth and a little washing up liquid, if required.
Never immerse the scale in water or rinse it under running water.
Disposal
Batteries and electronic devices must be disposed of in accordance with the locally applicable
regulations, not with domestic waste.
5. TECHNICAL SPECIFICATIONS
Max capacity: 180
kg / 396 lb / 28.8 st
Division: 100
g / 0.2 lb
Accuracy:
±0.3 kg for measurement range 3 kg to 50 kg
±0.5 kg for measurement range 51 kg to 100 kg
±0.7 kg for measurement range 101 kg to 150 kg
±0.8 kg for measurement range 151 kg to 180 kg
LCD display: 73
× 34 mm
Backlight function LCD display
Dimension of scale: 300.5
× 300.5 × 17.5 mm
6
mm tempered safety glass platform
Equipped with high strain gauge sensors
Auto on function
Weighing unit switch between kg
/ lb / st
Automatic zero and switch off
Low battery and overload indication
Battery (included) 2 × CR2032
Operation environment:
Temperature: +10˚С ~ +40˚С
Humidity: <80%
Storage and transportation environment:
Temperature: -20˚С ~ +50˚С
Humidity: <90%
Technical alterations reserved.

IM_PRO-166_EN_3920
www.bwell-swiss.ch
B.Well Swiss AG
Bahnhofstrasse 24,
9443 Widnau,
Switzerland
6. SYMBOL INFORMATION
Follow instructions before use
Manufacturer’s Name
Article number
Serial number
Type BF equipment
Disposal for separate collection
Operating condition, temperature 10˚C ~ 40˚C
Storage condition, teperature -20˚C ~ 50˚C
CE mark
Keep dry
7. WARRANTY INFORMATION
Warranty period is 1 years from the date of purchase. This warranty doesn’t cover any damages
caused by improper using, and also battery and packaging. When a manufacturing defect is
revealed during the warranty period a faulty unit would be repaired or, if repairing is impossible,
replaced with another one.
The manufacturer may change units partially or completely if necessary, without prior notice.
The date of manufacture of the device is specified in the LOT number indicated on the device. The
first two digits indicate the month, and the following four digits indicate the year of production.