Baby Appleseed Chelmsford User manual

PAGE 10 CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
•Warning: Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings
or pacifier cords. Do not suspend strings over a crib or attach strings to toys.
•DO NOT place a crib near a window where cords from blinds or drapes may strangle a child.
•Keep wall decorations, especially those with strings, completely out of a child’s reach.
•Before each usage or assembly, inspect crib for damaged hardware,loose joints, missing parts or sharp edges. DO NOT
use the crib if any parts are missing or broken. Ask your dealer or contact manufacturer for replacement parts and
instructional literature if needed. DO NOT substitute parts.
•Check fasteners periodically for tightness. Do not overtighten. This may cause distortion or breakage.
•When a child is able to climb out, reaches the height of 35 in. (89cm) or when the height of the side rail is less than 3/4
of the child’s height, the crib shall no longer be used.
•DO NOT use a water mattress with this crib. •If refinishing, use a non-toxic finish specified for children’s products.
•When a childis able to pull to a standing position,set the mattress to the lowest position and remove bumper pads, large
toys and other objects that could serve as steps for climbing out.
•Never use plastic shipping bags or other plastic films as mattress covers because they can cause suffocation.
•Do not tie pacifiers, necklaces, or any other items around a child’s neck or on crib parts. This could cause strangulation.
•Use a crib as a crib, not as a play pen. Remember that a crib is not a substitute for a parent’s supervision.
•Parents should ensure a safe environment for their child by checking the crib regularly before placing the child in the
product. Please make sure that every component is properly and securely in place.
•Infants can suffocate in gaps between crib sides and a mattress too small.
•To help prevent strangulation,tighten all fasteners. A child can trap parts of body or clothing on loose fasteners.
•To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep,unless
otherwise advised by your physician.
Failure to follow these warnings and assembly
instructions could result in serious injury or death.
WARNING:
Infants can suffocate on soft bedding.
•NEVER add a pillow, comforter or padding.
•NEVER place additional padding under an infant.
WARNING:
Read all instructions before assembling crib. Follow all product
warnings on crib. Keep the manual in the sleeve provided for future use.
Caution: Any mattress used in this crib must be at least 27 1/4 in by
51 5/8 in (69 cm x 131 cm) with a thickness not exceeding 6 in (15 cm).
•This crib is to be assembled by an adult•

PAGE 11 CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
CARE AND MAINTENANCE:
Periodically check your crib for any loose bolts and screws and tighten where needed.
If crib is damaged, do not use - contact us for replacement parts. Clean with mild soap
that is safe on wood using a soft rag. Rinse and dry thoroughly. Avoid excess
moisture.
ONE YEAR LIMITED WARRANTY:
Defective parts will be replaced within a one year period from date of original
purchase. Missing parts will be replaced within 30 days from the date of original
purchase. Baby Appleseed warrants only new units purchased in it’s original packag-
ing. The warranty does not cover used, secondhand or demos and is non-
transferable.
Any damaged or defective part that result from normal wear and tear, abuse,
negligence, improper use or alteration to the finish, design, and hardware of the crib,
or the assembly of this product are not covered. The specific legal rights of this
warranty may vary from state to state. Some states do not allow any exclusion or
limitation of incidental or consequential damages. Some states do not allow limitation
on how long an implied warranty lasts.
Please visit our website at www.babyappleseed.com.
There you can find more product information, register for
your product, contact us or request replacement parts.
Or you can write to us at:
Baby Appleseed
15269 Don Julian Road
City of Industry, CA 91745
•The intended user’s minimum age must be at least 15 months old and maximum weight must not exceed 50lbs •DO NOT
place bed near windows where cords from blinds or drapes may strangle a child •DO NOT place items with a string, cord,
or ribbon, around a child’s neck, such as a hood, strings, or pacifier cords •DO NOT suspend strings over a toddler bed for
any reason •The mattress intended for this bed shall be a full-size crib mattress that must be at least 27-1/4 inches by
51-5/8 inches with a thickness not exceeding 6 inches.
Failure to follow these warnings and assembly instructions could result in serious injury or death.
!WARNING:WHEN USING AS TODDLER BED

Chelmsford
Assembly Manual
Caring for the future
www.babyappleseed.com
®

Small Wood Screws x 7
Hardware
We would like to thank you for purchasing one of our cribs. Because of customers like you,
we are able to make a positive impact on our environment, shaping and building a better
future for all of our children.
Although caring for the environment is a priority for us at Baby Appleseed, you should know
that our first and foremost concern is building a safe and sound product for you and your baby.
Featuring solid wood construction and no moving parts, our cribs are designed to withstand
the test of time; this provides for a safe and sturdy product that will grow with your baby.
Again, thank you for your support and welcome to our family.
Sincerely,
Baby Appleseed
Hex Wrench x 1Locking Washers x 8
Barrel Nuts x 4Butterfly Nuts x 8
2-3/4” Bolts x 6
3-1/8“ Bolts x 4
2” Bolts x 6
1-1/4” Philips Bolts x 8
PAGE A CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
Large Wood Screws x 3

Drawer Parts
Footboard
To ddler Conversion Rail
Mattress Support (Style may vary)
Headboard Right Panel Left Panel
Box Contents
Be sure to assemble the furniture in a dirt free environment to avoid scratching or damaging the wood.
Drawer Front x 1
Drawer Back x 1
Middle Drawer Panel x 1
Drawer Boards x 2
PAGE B CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed®All Rights Reserved.
Right Drawer Panel x 1
Left Drawer Panel x 1
Left Drawer Support x 1 Right Drawer Support x 1
Cross Bar x 2

1.) Installing mattress support
onto cross bars
Hardware needed:
x 8 x 8
PAGE 1 CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
1A
1C
1A Swing the arm up as shown. Please note that
the style of mattress support may vary.
Middle Level
Lowest Level
Highest Level
1B
1B Swing the long arm down and find the hole
corresponding to the level in which you want the
mattress support to be at. Repeat Steps 1A and
1B for all 4 arms. NOTE: It is important to lower
the mattress support as you child grows.
1C Attach the support bar to one end of
the arm and attach the mattress support
to the other end using the philips bolt,
lock washer and butterfly nut.
Make sure the other side is at the same
level and do the same. The arms attach
on the inside of the support bar.
USING THE MATTRESS SUPPORT IN ANY NON-INTENDED POSITIONS MAY CAUSE SERIOUS INJURY OR HARM TO YOUR CHILD.
x 8

2.) Attaching mattress support
to left and right sides.
Hardware needed:
x 4x4
PAGE 2 CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
Attach each side using two 3-1/8” bolts and two barrel nuts for each side.
2A
2A 2B
2B
3-1/8” Bolts

3.) Attaching headboard. Hardware needed:
x 6
PAGE 3 CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
Attach headboard to mattress support/side assembly using six 2-3/4” bolts.
2-3/4” Bolts
PLEASE NOTE THAT CRIB STYLE IN THE ILLUSTRATION MAY BE DIFFERENT
BUT ALL HOLES AND INSERTS ARE IN THE SAME PLACE AND ASSEMBLES THE SAME.

4.) Attaching footboard and
drawer supports.
Hardware needed:
x 6
PAGE 4
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
4A. Attach drawer supports by inserting the wooden dowels into the base of the headboard. Attach the
footboard with four 2” bolts. 4B. Secure each drawer support to eachheaboard leg with one small wood
screw.
Drawer Support
Drawer Support
4A
4B
x 2
SMALL WOOD SCREWS
2” BOLTS
CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.

PAGE 5 CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
5A. Attach the rear drawer panel to the drawer using 3 large wood screws. DO NOT USE POWER
TOOL. DO NOT OVER-TIGHTEN. 5B. Slide drawer boards along the grooves of the panels.
5.) Attach drawer back to left,
right and center drawer panels.
Insert drawer boards.
Hardware needed:
6.) Attaching front panel to drawer Hardware needed:
Line up drawer face to the dowels located on the ends of the left, center and right drawer panels. Use 5
wood screws to secure the drawer face to the pre-installed angle brackets.
x 3
LARGE WOOD SCREWS
x 5
SMALL WOOD SCREWS
Left Drawer Panel
Middle Drawer Panel
Drawer Board
Drawer Board
Right Drawer Panel
Front Drawer Panel

PAGE 6 CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
7.) Insert drawer into crib
Before using the crib, please recheck all bolts and screws and make sure
they are tight and secure. Be careful not to over-tighten the hardware.
The Chelmsford converts to a
toddler bed using a conversion rail
that is included with the crib.
Instructions to convert to a
toddler bed are below.
The Chelmsford also converts to
a full size bed. The full size
conversion rail kit is sold
separately and the instructions are
included with the kit.
READ ALL WARNINGS AND CAUTION STATEMENTS ON PAGE 10
BEFORE USING.

PAGE 7 CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
Converting Your Chelmsford Crib Into A Toddler Bed
The toddler bed user’s minimum age must be at least 15 months old and maximum weight must not exceed 50lbs.
STEP ONE
Remove drawer from crib.
Converting Your Chelmsford Crib Into A Toddler Bed
STEP TWO
Remove the wood screws securing the drawer supports.
Detach the footboard by removing six 2” inch bolts.
Remove drawer supports.

PAGE 8 CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
Converting Your Chelmsford Crib Into A Toddler Bed
STEP THREE
Lower the mattress support to the lowest setting. Please refer to Step #1 on how to adjust the
mattress support.

PAGE 9 CHELMSFORD CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed® All Rights Reserved.
Converting Your Chelmsford Crib Into A Toddler Bed
STEP FOUR
Attach the toddler rail to the
left and right panels using four
2” bolts.
Recheck and make sure all
bolts are securely fastened
and tightened.
You may want to place a cloth
against the side panel slats while
attaching the rail to prevent
scratching of the wood.
Before using the bed, please
recheck all bolts and screws
and make sure they are tight
and secure. Be careful not to
over-tighten the hardware.
Hardware needed:
x 4
2” Bolts
!!READ ALL TODDLER BED
WARNINGS AND CAUTION
STATEMENTS ON PAGE 11
BEFORE USING!!

(CUT HERE TO MAIL)

Chelmsford Crib 4 Drawer Dresser 5 Drawer Dresser Combo Dresser Double Dresser Armoire Chelmsford Hutch Nightstand
PRODUCT PURCHASED (Check all that apply)
Espresso Colonial White
Merlot Coco
Heritage Cherry
FINISH
NAME ADDRESS CITY STATE ZIP PHONE EMAIL CHILD’S FULL NAME BIRTHDATE SEX M F
©2012 Baby Appleseed®
GLOBAL RELEAF DONOR CARD
Caring for
the
future
www.babyappleseed.com
®
in partnership with
(PLEASE CIRCLE ONE)(MONTH/DAY)
PLEASE PRINT CLEARLY
(As you would want it to appear on the certificate)
CAN BE FOUND ON A LABEL ON THE INSIDE HEADBOARD PANEL OF THE CRIB
SERIAL NO#
10 trees will be planted on your child’s behalf to the Global Relief fund. This program involves many regions in the United States urgently needing trees.
Yo u will receive a certificate in the mail certifying that trees have been planted on your child’s behalf and a one year subscription to American Forest’s Quarterly Magazine at no charge. Please allow 8-10 weeks to process. Thank you for choosing Baby Appleseed.
The Global ReLeaf program has worked with local partners to plant trees in every state in the US, and in
38 countries around the world. Millions of trees have been planted with our help in areas damaged by
natural causes or human activity. Because natural disasters like severe storms and intense wildfires can damage or destroy large numbers
of trees, the program works to replant the areas that have been deforested. After Hurricane Katrina, American Forests worked
with Gulf Coast communities to get new trees planted as quickly as possible. And each year, many of the projects in western
forests are aimed at replanting areas that can no longer regenerate naturally because of high-intensity burns. Restoration of any woodland will provide habitat for a wide variety of creatures, and some projects have been planted specifi-
cally to provide food and shelter for birds and animals as their habitats are destroyed or degraded by climate change, wildfire, human activity, or a number of other causes.

BABY APPLESEED 15269 DON JULIAN ROAD
CITY OF INDUSTRY, CA 91745
Please mail this completed form in an envelope to: