Baby Appleseed Millbury User manual

Millbury
Assembly Manual

We would like to thank you for purchasing one of our cribs. Because
of customers like you, we are able to make a positive impact on our
environment, shaping and building a better future for all of our
children.
Although caring for the environment is a priority for us at Baby Apple-
seed, you should know that our first and foremost concern is building
a safe and sound product for you and your baby. Featuring solid
wood construction and no moving parts, our cribs are designed to
withstand the test of time; this provides for a safe and sturdy product
that will grow with your baby.
Again, thank you for your support and welcome to our family.
Sincerely,
Baby Appleseed

Footboard
To ddler Conversion Rail
Mattress Support (Style may vary)
Headboard Right PanelLeft Panel
Box Contents
Be sure to assemble the furniture in a dirt free environment to avoid scratching or damaging the wood.
Hex Wrench x 1
Barrel Nuts x 4
Hardware
Butterfly Nuts x 8
Locking Washers x 8
2-3/4” Bolts x 6
3-1/8“ Bolts x 4
2” Bolts x 6
1-1/4” Philips Bolts x 8
Cross Bar x 2

1.) Installing mattress support
onto cross bars
Hardware needed:
x 8 x 8
PAGE 1 MILLBURY CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed®All Rights Reserved.
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
1A
1C
1A Swing the arm up as shown. Please note that
the style of mattress support may vary.
Middle Level
Lowest Level
Highest Level
1B
1B Swing the long arm down and find the hole
corresponding to the level in which you want the
mattress support to be at. Repeat Steps 1A and
1B for all 4 arms. NOTE: It is important to lower
the mattress support as you child grows.
1C Attach the support bar to one end of
the arm and attach the mattress support
to the other end using the philips bolt,
lock washer and butterfly nut.
Make sure the other side is at the same
level and do the same. The arms attach
on the inside of the support bar.
USING THE MATTRESS SUPPORT IN ANY NON-INTENDED POSITIONS MAY CAUSE SERIOUS INJURY OR HARM TO YOUR CHILD.
x 8

2.) Attaching mattress support
to left and right sides.
Hardware needed:
PAGE 2 MILLBURY CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed®All Rights Reserved.
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
Attach each side using two 3-1/8” bolts
and two barrel nuts for each side.
2A
2A 2B
2B
x 4x4
3-1/8” Bolts

3.) Attaching headboard. Hardware needed:
x 6
PAGE 3 MILLBURY CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed®All Rights Reserved.
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
4.) Attaching footboard. Hardware needed:
Attach footboard to mattress support/side assembly using six 2” bolts.
Attach headboard to mattress support/side assembly using six 2-3/4” bolts.
2-3/4” Bolts
2” Bolts x 6

Before using the crib, please recheck all bolts and screws and make sure
they are tight and secure. Be careful not to over-tighten the hardware.
PAGE 5 MILLBURY CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed®All Rights Reserved.
Converting Your Milbury Crib Into A Toddler Bed
STEP ONE
Detach the foot board
from the crib by
removing six 2” bolts.
The Millbury converts to a toddler
bed using a conversion rail that is
included with the crib. Instructions
to convert to a toddler bed are
below.
The Millbury also converts to a full
size bed. The full size conversion
rail kit is sold separately and the
instructions are included with the
kit.
READ ALL WARNINGS AND CAUTION STATEMENTS ON PAGE 7
BEFORE USING.
READ ALL TODDLER BED WARNINGS ON PAGE 8 BEFORE USING.

PAGE 6 MILLBURY CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed®All Rights Reserved.
Lower the mattress support to the lowest level. Refer to Step 1 on how to adjust the mattress
support.
Converting Your Millbury Crib Into A Toddler Bed
STEP TWO
Converting Your Millbury Crib Into A Toddler Bed
STEP THREE
Please read all toddler
bed warnings on page
8 before using.
Hardware needed: 2” bolt x 4
Attach the toddler rail to the
left and right panels using four
2” bolts.
Recheck and make sure all
bolts are securely fastened
and tightened.
You may want to place a cloth
against the side panel slats while
attaching the rail to prevent
scratching of the wood.

PAGE 7 MILLBURY CRIB ASSEMBLY MANUAL • ©2012 Baby Appleseed®
•Warning: Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings
or pacifier cords. Do not suspend strings over a crib or attach strings to toys.
•DO NOT place a crib near a window where cords from blinds or drapes may strangle a child.
•Keep wall decorations, especially those with strings, completely out of a child’s reach.
•Before each usage or assembly, inspect crib for damaged hardware,loose joints, missing parts or sharp edges. DO NOT
use the crib if any parts are missing or broken. Ask your dealer or contact manufacturer for replacement parts and
instructional literature if needed. DO NOT substitute parts.
•Check fasteners periodically for tightness. Do not overtighten. This may cause distortion or breakage.
•When a child is able to climb out, reaches the height of 35 in. (89cm) or when the height of the side rail is less than 3/4
of the child’s height, the crib shall no longer be used.
•DO NOT use a water mattress with this crib. •If refinishing, use a non-toxic finish specified for children’s products.
•When a child is able to pull to a standing position,set the mattress to the lowest position and remove bumper pads, large
toys and other objects that could serve as steps for climbing out.
•Never use plastic shipping bags or other plastic films as mattress covers because they can cause suffocation.
•Do not tie pacifiers, necklaces, or any other items around a child’s neck or on crib parts. This could cause strangulation.
•Use a crib as a crib, not as a play pen. Remember that a crib is not a substitute for a parent’s supervision.
•Parents should ensure a safe environment for their child by checking the crib regularly before placing the child in the
product. Please make sure that every component is properly and securely in place.
•Infants can suffocate in gaps between crib sides and a mattress too small.
•To help prevent strangulation, tighten all fasteners. A child can trap parts of body or clothing on loose fasteners.
•To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep,unless
otherwise advised by your physician.
Failure to follow these warnings and assembly
instructions could result in serious injury or death.
WARNING:
Infants can suffocate on soft bedding.
•NEVER add a pillow, comforter or padding.
•NEVER place additional padding under an infant.
WARNING:
Read all instructions before assembling crib. Follow all product
warnings on crib. Keep the manual in the sleeve provided for future use.
Caution: Any mattress used in this crib must be at least 27 1/4 in by
51 5/8 in (69 cm x 131 cm) with a thickness not exceeding 6 in (15 cm).
•This crib is to be assembled by an adult•

(CUT HERE TO MAIL)

Millbury Crib 5 Drawer Dresser Combo Dresser Double Dresser Armoire Hutch Nightstand
PRODUCT PURCHASED (Check all that apply)
Moon Grey Pure White
Espresso Coco
FINISH
NAME ADDRESS CITY STATE ZIP PHONE EMAIL CHILD’S FULL NAME BIRTHDATE SEX M F
©2016 Baby Appleseed®
GLOBAL RELEAF DONOR CARD
in partnership with
(PLEASE CIRCLE ONE)(MONTH/DAY)
PLEASE PRINT CLEARLY
(As you would want it to appear on the certificate)
CAN BE FOUND ON A LABEL ON THE INSIDE HEADBOARD PANEL OF THE CRIB
SERIAL NO#
10 trees will be planted on your child’s behalf to the Global Relief fund. This program involves many regions in the United States urgently needing trees.
Yo u will receive a certificate in the mail certifying that trees have been planted on your child’s behalf and a one year subscription to American Forest’s Quarterly Magazine at no charge. Please allow 8-10 weeks to process. Thank you for choosing Baby Appleseed.
The Global ReLeaf program has worked with local partners to plant trees in every state in the US, and in
38 countries around the world. Millions of trees have been planted with our help in areas damaged by
natural causes or human activity. Because natural disasters like severe storms and intense wildfires can damage or destroy large numbers
of trees, the program works to replant the areas that have been deforested. After Hurricane Katrina, American Forests worked
with Gulf Coast communities to get new trees planted as quickly as possible. And each year, many of the projects in western
forests are aimed at replanting areas that can no longer regenerate naturally because of high-intensity burns. Restoration of any woodland will provide habitat for a wide variety of creatures, and some projects have been planted specifi-
cally to provide food and shelter for birds and animals as their habitats are destroyed or degraded by climate change, wildfire, human activity, or a number of other causes.

Please mail this completed form in an envelope to:
BABY APPLESEED
14001 ROSECRANS AVE
LA MIRADA, CA 90638