Baby Trend RESPIRO Assembly instructions

RESPIRO™INSTALLATION TIP RESPIRO™INSTALLATION TIP
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
4 1
Fig. 3c
Fig. 3d
Fig. 3e
1) • After following (Fig. 1a) through
(Fig. 1b) of The Respiro™ Crib
Mattress instruction manual,
use these alternative steps for
a fast and easy installation.
• Glide the Sleep Surface tubing
completely through the tracks.
• Carefully ip the Frame over
and repeat for the other Sleep
Surface (Fig 1c).
Fig. 1c
Fig. 1d
• To partially zip the Sleep
Surfaces together, insert the
zipper pull into the zipper
insertion and close only 2
inches (Fig 3c).
• Expand the second side of the
Respiro™ Frame completely.
Place one hand on the corner
of the Respiro™ Mattress and
your other hand on the trigger
handle (Fig 3d). Always grasp
the trigger handle from the
outer edge. Do not engage the
trigger handle from the inner
mechanism (Fig 3e).
• Close the zipper completely.
Place the zipper pull at on the
zipper to lock into position
(Fig 2c).
DO NOT RETURN YOUR PRODUCT TO
THE STORE. PLEASE CONTACT BABY
TREND®FOR REPLACEMENT PARTS,
SERVICE AND REPAIR.
NO DEVUELVA SU PRODUCTO A LA
TIENDA. POR FAVOR CONTACTE A BABY
TREND®PARA PIEZAS DE REPUESTO,
SERVICIO Y REPARACION.
NE PAS RETOURNER VOTRE PRODUIT
AU MAGASIN. VEUILLEZ CONTACTER
BABY TREND®POUR DES PIÈCES DE
RECHANGE, ENTRETIEN ET RÉPARATION.
IMPORTANT: Be sure that
the tubing goes all the way
through the tracks. Tug the
Sleep Surfaces rmly on the
opposing side to ensure that
the Sleep Surfaces are set in
correctly (Fig 1d).
CM01XXXA_USA_Insert80817
Closed Track

RESPIRO™INSTALLATION TIP RESPIRO™INSTALLATION TIP
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
2 3
• Starting on the end with the
closed track, partially zip the
Sleep Surfaces together,
insert the zipper pull into the
zipper insertion and close
only 2 inches (Fig 1e).
2) • Expand the rst side of the
Respiro™ Frame completely.
Place one hand on the corner
of the
Respiro™ Mattress
and your other hand on the
trigger handle (Fig 2a).
NOTE: Always grasp the
trigger handle from the outer
edge. Do not engage the
trigger handle from the inner
mechanism (Fig 2b).
Fig. 1e
Fig. 2a
Fig. 2b
Fig. 3b
Fig. 2c
Fig. 3a
Lock Position
Posición para asegurar
Position verrouillée
• Close the zipper completely.
Place the zipper pull at on the
zipper to lock into position
(Fig 2c).
3) • On the end with the open track
of The Respiro™ Crib Mattress,
begin the process again to
ensure the Sleep Surfaces are
tightly pulled through the frame.
• Tug the Sleep Surfaces rmly
on the top and bottom sides to
be sure the Sleep Surfaces are
set in correctly (Fig 3a).
IMPORTANT: Be sure that
the tubing goes all the way
through the tracks. Tug the
Sleep Surfaces rmly on the
opposing side to ensure that
the Sleep Surfaces are set in
correctly (Fig 3b).
Open Track