Babyhug B6BR035 User manual

Children Electric RIDE ON
Owner’s Manual
with Assembly Instructions
Styles and colo(u)rs may vary.
Made in China.
The owner’s manual contains important safety information as well as assembly, use and
maintenance instructions.
The Ride-on Car must be assembled by an adult who has read and understands the
instructions in this manual.
Keep the package away from children and dispose of properly before use.
Keep this manual for future reference.

On the purchase of your new Ride-On.
This ride-on car will provide your child with many miles of riding of
enjoyment. To help assure you and your rider a safe ride we ask you to
please read this manual carefully, and keep it for future reference.
Follow the recommendations in this manual, they are designed to improve
the safety and operation of your ride-on car and it’s rider.
Battery
Charger
6V7Ah*1 or 6V10 *1
6V1000mA
6V7Ah*2 or 6V10Ah *2
12V1000mA
Suitable age:
Load Capacity:
Speed:
Size of car:
Power way:
Charge time:
37~96 Months
Under 30 kgs
1WD: 2.5 km/h 2WD:2.5~5 km/h
123 x 73 x 55 CM
Charging type
8 ~ 12 hours
About Your New Ride-On │1
VER: SMS-JE1188-EN-160330

1
6
1
2
7
1
4
3
A
B
C
D
E
F
G
H
1
2
3
4
5
6
7
8
9
10
11
12
13
1
1
1
3
1
1
2
1
1
1
1
1
1
2
2
2
2
2
2
4
2
8
2
PART
NO.
REMARKS
PART NAME
Q’ty (pcs)
Gear box
Driving wheel
Motor hood
Normal wheel
Windshield
Vehicle body
Mirrors
Steering wheel
M5x35 machine screw
Ø5 nut
Seat
Charger
Remote controller
Spanner
Ø4x10 round head screw
Driving wheel lock
Ø4x10 round head screw
Ø12 washer
Lock nut
Ø4x12 flat head screw
Bushing
Placed on the steering wheel
Placed on the steering wheel
Left and right
For motor hood
One labeled “L”, and the other one labeled “R”
1WD
2WD
2WD
Parts List │2
Assembly package
IF EQUIPPED
IF EQUIPPED
IF EQUIPPED
IF EQUIPPED
IF EQUIPPED, for R/C type only

1
2
8
13 A
E
H
4
E
F
C
D
B
7
6
14
910
3
G
11
5
HINT: Some parts shown are assembled on both sides of vehicle
Parts Diagram │3
CONTROLLER STYLES MAY VERY

Before Assembly │4
• Make sure that the power switch is turned “OFF” before assembling the ride-
on.
• Before first time use, charge the battery for at least 4 to 6 hours.
• Assembly tools required:
WARNING!
Screwdriver
(not included)
Long nose pliers
(not included)
Spanner
(If equipped)
●Non-rechargeable batteries are not to be recharged.
●Rechargeable batteries are to be removed from the toy before being charged.
●Rechargeable batteries are only to be charged under adult supervision.
●Different types of batteries or new and used batteries are not to be mixed.
●Batteries are to be inserted with the correct polarity.
●Exhausted batteries are to be removed from the toy.
●The supply terminals are not to be short-circuited.
BATTERY INFORMATION
• CHOKING HAZARD - Small parts. Not suitable for children under 36 months.
The product contains small parts, keep children away when assembling.
• ADULT ASSEMBLY REQUIRED.
• Always remove protective material and poly bags and dispose before assembly.

2
3
4
8
9
7
5
6
1
Attach the Rear Wheels │5
Driving Wheel
Normal Wheel
1WD
1.Slide the gear box onto the rear axle from Left Side. Keep the connector on the gear
box passes through the hole on the rear vehicle and out where the battery sits.
TYPE A-With Quick Installation: 2. Slide the driving wheel onto the rear axle, and keep
the driving wheel match with the gear box. Make sure you hear the wheel “snap” into
place.
TYPE B-With Driving Wheel Lock: 2. Slide the driving wheel on to the rear Alex.
3. Slide a Ø12 Washer onto the rear axle.
4. Tighten a locknut to the end of the rear axle with a spanner (provided).
5. Fit the driving wheel lock to the driving wheel.
6. Tighten two Ø4x10 round head screws to secure the lock to the driving wheel. Refer to
the operation on page 19.
Rear axle
7. Slide the Ø12 Washer onto the rear axle from right side.
8. Slide the Bushing onto the rear axle .
9. Slide a normal wheel onto the rear axle, and keep it match with the Bushing. Make sure
you hear the wheel “snap” into place.
HINT: If your vehicle is Two Wheels Driving Type, see the next page
please.

2
3
4
5
6
1
Attach the Rear Wheels │6
2WD
1.Slide the gear box onto the rear axle. Keep the connector on the gear box
passes through the hole on the rear vehicle and out where the battery sits. R”
labeled gear box should be fit to the “R” side of vehicle body; “L” labeled gear
box should be fit to “L” side of vehicle body.
TYPE A-With Quick Installation: 2. Slide the driving wheel onto the rear axle,
and keep the driving wheel match with the gear box. Make sure you hear the
wheel “snap” into place.
TYPE B-With Driving Wheel Lock: 2. Slide the driving wheel on to the rear
Alex.
3. Slide a Ø12 washer onto the rear axle.
4. Tighten a locknut to the end of the rear Alex with a spanner (provided).
5. Fit the driving wheel lock to the driving wheel.
6. Tighten two Ø4x10 round head screws to secure the lock to the driving wheel.
Refer to the operation on page 19.
Repeat for the other side.
• HOW TO REMOVE A WHEEL WITH QUICK INSTALLATION: Push the hubcap
(in the center of the wheel cover) to remove the wheel from the axle.
Driving Wheel Rear axle

1
2
3
Front axle
Remove all the parts from the front axle.
1. Slide a Ø12 washer onto the front axle.
2. Slide the bushing onto the front axle.
3. Slide the normal wheel onto the front axle. and keep the normal wheel match
with the bushing. Make sure you hear the wheel “snap” into place.
Repeat the above procedure to assemble the other normal wheel.
• HOW TO REMOVE A WHEEL WITH QUICK INSTALLATION: Push the
hubcap (in the center of the wheel cover) to remove the wheel from the axle.
Attach the Front Wheels │7
Normal Wheel
Front Bottom View

42
1
3
6
7
5
End of the
steering column
Attach the Steering Wheel │8
Turn over the vehicle.
Remove the M5x35 machine screw and Ø5 nut from the steering wheel.
5. Place the steering wheel over the steering column, protruding from the middle
of the steering wheel base.
6. Align the holes on each side of steering wheel with the holes at the end of the
steering column.
7. Fasten a nut on the opposite end of the screw to secure the steering wheel to
the steering column.
1. With a screwdriver remove the screw
on the battery cover located in the
center of the steering wheel.
2. Remove the battery cover from the
top of the battery compartment.
3. Insert two AA batteries in their
correct polarities.
4. Place the battery cover over the
battery compartment and fasten
with the screw you removed in step
one.
Attache the Steering Wheel
Refer to the battery information on page 4.
If the steering wheel of your vehicle equipped with sound function,
follow the step 1~4 to add the batteries.

1
2
3
Attach the Windshield & Mirrors │9
1. Insert the tabs on the windshield
into the grooves on the vehicle and
push until you hear it snap into
place.
2. Insert mirror into hole on front vehicle and push until you hear it snap
into place.
3. Repeat for the other side.

2
1
Connect the Power Supply │10
1WD
2WD
1. Plug the Vehicle Connector into the Motor Connector on
body as shown above.
2. Plug the Red fuse connector into the terminal on battery.
1. Plug the Vehicle Connector into the Motor Connector on
body as shown above. Repeat for the other side.
2. Plug the Red fuse connector into the terminal on battery.
Rear Top View
Fuse box
Battery
Vehicle
connector
Motor connector

1
2
x4
Attach the Motor Hood │11
1WD
2WD
1. Fit the motor hood on the motor.
2. Tighten four Ø4x12 flat head screws to secure it.
1. Fit the motor hood on the motor.
2. Tighten four Ø4x12 flat head screws to secure it.
Repeat the above steps for the other Motor hood.

x4
2
1
x4
2
1
1
3
3
Attach the Seat │12
Normal Seat Assembly
Adjustable Seat Assembly (Operation on page 20)
1. Fit the tabs on the back of seat into the
slots on the rear vehicle.
2. Tighten four Ø4x12 flat head screws to
secure it with a screwdriver.
3. Tighten two Ø4x12 flat head screws to
secure the seat with a screwdriver.
1. Fit the pipes on the back of seat into the
holes on the rear vehicle.
2. Tighten four Ø4x12 flat head screws a
screwdriver.
3. Tighten two Ø4x12 flat head screws to
secure the seat with a screwdriver.

PREVENT INJURIES AND DEATHS:
• NEVER LEAVE CHILD UNATTENDED. DIRECT ADULT SUPERVISION IS
REQUIRED. Always keep child in view when child is in vehicle.
• This toy should be used with caution since skill is required to avoid falls or
collisions causing injury to the user or third parties.
• Protective equipment should be worn.
• Never use in roadways, near cars, on or near steep inclines or steps,
swimming pools or other bodies of water.
• Always wear shoes.
• Always sit on the seat.
• Not to be used in traffic.
• This toy is unsuitable for children under 36 months due to its maximum
speed; Maximum user weight is 30 kgs.
• This toy has no brake.
Rules for Safe Riding
• This vehicle has adjustable play seat belts. Please instruct children how to tie the
safety belt before using, guarantee the security.
• Keep Children within Safe Riding Areas:
- Never use in roadway, near motor vehicles, on lawn space, on or near steep
inclines or steps, swimming pools or other bodies of water;
• Use the toy only on flat surfaces. Such as inside your house, garden or
playground.
• Never use in the dark. A child could encounter unexpected obstacles and have
an accident. Operate the vehicle only in the daytime or a well-lit area.
• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically.
• Do not let any child touch the wheels or be near them when the car is moving .
WARNING!
Use the vehicle on generally level ground ONLY!
DO NOT Use the vehicle on Lawn space!
Safety │13

3
4
5
6
2
8
1
7
Make sure your child knows how to steer, how to start and stop the vehicle and knows
the rules for safe driving. The vehicle can be driven at a maximum of 2.5~5 km/h.
ADVANCED USE - High speed Drive
1. Power Switch: Turns the vehicle on and off.
2. Forward/reverse switch: Changes the direction that vehicle moves from forward to
reverse.
●To move the car forward, rock the switch to “forward” position.
●To move the car backward, rock the switch to “reverse” position.
3. Sounds buttons (IF EQUIPPED):Press for sounds playing.
4. Volume knob (IF EQUIPPED): Turn the knob clockwise to increase the volume; Turn
the knob counterclockwise to decrease the volume.
5. Foot pedal: Applies power (speed) to the vehicle.
●To move the car, press the pedal down.
●To brake or slow down, release pressure from the pedal.
6. Auxiliary input (IF EQUIPPED): Allow the audio from your portable music player or
phone to be played through the vehicle speakers.
7. Digital voltmeter (IF EQUIPPED): See <Charging>, page 21.
8. Foot pedal - R/C switch (IF EQUIPPED): Change the operation mode, Foot-pedal
operation or Remote Controller operation.
OR High/Low speed switch (IF EQUIPPED):The switch operates the vehicle to move
in low or high speed.
Use Your Ride-on │14
Always stop vehicle
when changing the
speed or direction to
avoid damage the
gears and motor.
IMPORTANT!
Your vehicle may be equipped with the Multi-Function dash, see the
next page please!

FM
MP4
MP3 POWER
||
SD
123 4 5 6
7
8
9
10
11
12
13 14 15
Use the Multi-function Dash (IF EQUIPPED) │15
LED Screen
(if equipped)
Charging
indicator
1. Power switch: Turn the
vehicle on and off.
2. Sounds button: Press for
sounds playing;
3. Storytelling mode : Press for storytelling.
4. NO Function.
5. FM button: Using the FM radio. Press it for 2-3 seconds, the radio will search
station automatically.
6. High speed: Driving the vehicle forward in high speed.
7. Low speed: Driving the vehicle forward and reverse in low speed.
HINT: The vehicle is designed to operate in low speed only in reverse.
8. Lights button: Turn the lights of vehicle on and off.
9. Previous /Increase volume: Long press for increasing the volume.
10. Pause: Pause playing the music:
11. Next / decrease volume: Long press for decreasing the volume.
12. MP3 audio input connector: Allow the audio from your portable music player or
phone to be played through the vehicle speakers.
13. MicroSD card slot: Only support mp3 format.
14. Digital voltmeter: Check the power remaining of your battery.
15. Charging input.
MicroSD card slot
(if equipped)
below the dash,
Support mp3/mp4.

ASSEMBLY
1. Insert the antenna into the controller by tweak the antenna clockwisely;
2. Lift the battery compartment door on the back of the controller and
insert two AA(LR6) batteries.
NOTE: Batteries not included.
Refer to the battery information on page 4.
ON-OFF SWITCH
INDICATOR LIGHT
RIGHT JOYSTICK
LEFT JOYSTICK
Use the Normal Remote Controller (IF EQUIPPED) │16
ADULT OPERATING REQUIRED!
WARNING:
Your vehicle may be equipped with a 2.4G REMOTE
CONTROLLER, see the next page please.

Use the 2.4G Remote Controller (IF EQUIPPED) │17
ADULT OPERATING REQUIRED!
WARNING:
1. Connection button (build connection)
Long press the Connection button for 2~4 seconds first; Then turn on the
power button located on the vehicle dashboard console, when the low speed
indicator goes from flashes into long bright, means the connection successful.
If the low speed indicator only flashes, means the connection failed. Replace
the batteries and repeat the steps above.
2. Brake button
Press the button to stop the vehicle, press it again to release the brake.
3. Speed select button
The switch operates the vehicle to move in low, normal or high speed.
HINT: The vehicle is designed to operate in low speed only in reverse.
• Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
• Repeat step 1 when you replace the batteries of the remote controller.
Connection button
Forward
button Left turning
button
Right turning
button
Brake button
Speed select button
High speed indicator
Normal speed indicator
Low speed indicator
ASSEMBLY
Lift the battery compartment door on the back of the controller and insert
two AAA(LR03) batteries.
NOTE: Batteries not included.
Refer to the battery information on page 4.
NOTE:
The remote control has precedence over foot pedal operation.
(The foot pedal won’t work while you operate the Remote Controller)
Reverse button

2
1
Use the Steering Wheel Lock & Steering Column Lock (IF EQUIPPED) │18
Lock position
Steering Wheel Lock operation (if equipped)
Steering Column Lock operation (if equipped)
Lock
Unlock position
When the lock in the lock position, the steering wheel can control the direction of
the vehicle.
When the lock in the unlock position, the steering wheel can be free rotation,
but CAN NOT control the direction of the vehicle.
1,2 Pull the Steering Column Lock up and turn it to any direction to Unlock the
steering column, its function is help your child easy to rotate the steering wheel
when driving the vehicle in Foot-Operation mode. (Figure 2)
Steering column
Steering
Column Lock
R/C steering
motor
Located below the dash.
Figure 1: Lock Figure 2: Unlock
NOTE: When use the Foot-Operation function, the lock must
snap into Lock position (as shown above).
NOTE: When use the R/C-Operation function, the lock must
snap into R/C motor (As figure 1).

3
2
2
1
1
Use the Driving Wheel Lock & Push Rod (IF EQUIPPED) │19
1,3 Push and turn the Driving Wheel Lock clockwise to Unlock the driving wheel .
When the lock in the unlock position, the driving wheel can be free rotation, so
you can push and pull the vehicle to move it.
1. Open the cover on top of rear
vehicle.
2. Press the button on the hand
rod till pull it up.
Lock
Push Unlock
NOTE: When use the hand rod to move the vehicle, the
Driving Wheel Lock must in the UNLOCK position, to avoid
damage the gears and motor.
NOTE:
• Make sure you hear it “snap” into place when you lock and unlock the driving wheel.
• When use the Foot-operation and R/C-operation, the driving wheel lock must in the
lock position.
1,2 Push and turn Driving Wheel
Lock counterclockwise to lock the
driving wheel. When the lock in the
lock position, DO NOT move the
vehicle by pulling or pushing, to
avoid damage the gears and motor.
Driving Wheel Lock operation (if equipped)
Push rod operation (if equipped)