ZEROTRIBE Zetricks ZT1144 User manual

INSTRUCTION MANUALINSTRUCTION MANUAL
ZeroTribe Conversion Kit Series
Type
T4 ’15-’19
for
MID

ଲષ ;5$<79HUfكজش 0,' ঞல஘૗ಌথংشঙথ؛
ହ৥છঃشఌಎ؞ଲ૑৔ઍൗ؛ൕൗ৖ীয়্১ ;5$<
7 ହ৥છజষ؛
This product is a conversion kit for changing the XRAY T4 (Ver.2015~2019) series to MID layout specifications.
This manual describes the contents necessary for replacing and manufacturing parts.
Please follow the XRAY T4 instructions for assembling the parts not listed.Thank you!
2
=7 =7ۧ
=7ۧ
=7
=7 =7ۧ =7 =7
=7
=7
=7
=7
=7
அঃش Parts included in the kit
ZeroTribe Conversion Kit Series
=7[
=7
㻿㼜㼍㼞㼑㻌㼜㼍㼞㼠㼟
㼆㼀㻝㻝㻠㻤 䜹䞊䝪䞁䝇䝏䞊䝹䝯䜲䞁䜼䜰䝅䝱䝣䝖 㻯㼍㼞㼎㼛㼚㻌㻿㼠㼑㼑㼘㻌㻹㼍㼕㼚㻌㻳㼑㼍㼞㻌㻿㼔㼍㼒㼠
㼆㼀㻝㻝㻠㻥 䜰䝹䝭䝯䜲䞁䜼䜰䝩䝹䝎䞊 㻭㻸㼁㻌㻹㼍㼕㼚㻌㻳㼑㼍㼞㻌㻴㼛㼘㼐㼑㼞
㼆㼀㻝㻝㻡㻜 䜰䝹䝭㻞㻝㼀䝥䞊䝸䞊 㻭㻸㼁䚷㻞㻝㼀㻌㻼㼡㼘㼘㼑㼥
㼆㼀㻝㻝㻡㻝 䝧䝹䝖䜺䜲䝗䝻䞊䝷䞊䝉䝑䝖 㻮㼑㼘㼠㻌㻳㼡㼕㼐㼑㻌㻾㼛㼘㼘㼑㼞㻌㻿㼑㼠
㼆㼀㻝㻝㻡㻟 䜹䞊䝪䞁䝇䝏䞊䝹㻌䝣䝷䞁䝆䝘䝑䝖䃅㻡⏝ᑠ 㻯㼍㼞㼎㼛㼚㻌㻿㼠㼑㼑㼘㻌㻲㼘㼍㼚㼓㼑㻌㻺㼡㼠㻌㻿㼙㼍㼘㼘㻌㼒㼛㼞㻌䃅㻡㻌
㼆㼀㻝㻝㻡㻠 䜰䝹䝭䝰䞊䝍䞊䝬䜴䞁䝖 㻭㻸㼁㻌㻹㼛㼠㼛㼞㻌㻹㼛㼡㼚㼠
㼆㼀㻝㻝㻡㻡 䜰䝹䝭䝰䞊䝍䞊䝬䜴䞁䝖䝫䝇䝖 㻭㻸㼁㻌㻹㼛㼠㼛㼞㻌㻹㼛㼡㼚㼠㻌㻼㼛㼟㼠
㼆㼀㻝㻝㻡㻢 䜰䝹䝭䝯䜲䞁䜼䜰䝅䝱䝣䝖䝇䝔䞊 㻭㻸㼁㻌㻯㼑㼚㼠㼑㼞㻌㼔㼍㼒㼠㻌㼟㼡㼜㼜㼛㼞㼠
㼆㼀㻝㻝㻡㻣 䜹䞊䝪䞁䝉䞁䝍䞊䝅䝱䝣䝖䝇䝔䝣䝘䞊 㻭㻸㼁㻌㻹㼍㼕㼚㻌㻳㼑㼍㼞㻌㻿㼔㼍㼒㼠㻌㻿㼠㼍㼥
㼆㼀㻝㻝㻡㻤 䝧䝹䝖䝔䞁䝅䝵䝘䞊䝉䝑䝖 㻮㼑㼘㼠㻌㼀㼑㼚㼟㼕㼛㼚㼑㼞㻌㻿㼑㼠
㼆㼀㻝㻝㻡㻥 䜹䞊䝪䞁䝅䝱䞊䝅䝇䝔䝣䝘䞊䝉䝑䝖 㻳㼞㼍㼜㼔㼕㼠㼑㻌㻯㼔㼍㼟㼟㼕㼟㻌㻿㼠㼕㼒㼒㼑㼚㼑㼞㻌㻿㼑㼠
㼆㼀㻝㻝㻢㻜 䜰䝹䝭䜰䝑䝟䞊䝕䝑䜻䝇䝖䝑䝟䞊⏝䝣䝷䞁䝆䝡䝇䠄㻜㻚㻡䠈㻝㻚㻜䡉䡉䝇䝨䞊䝃䞊௜ᒓ䠅 㻭㻸㼁䚷㻲㼘㼍㼚㼓㼑㻌㻿㼏㼞㼑㼣㻌㼒㼛㼞㻌㼁㼜㼜㼑㼞㻌㻰㼑㼏㼗㻌㻿㼠㼛㼜㼜㼑㼞㻌㻔㻜㻚㻡㻘㻌㻝㻚㻜㼙㼙㻌㼟㼜㼍㼏㼑㼞㻌㼕㼚㼏㼘㼡㼐㼑㼐㻕
㼆㼀㻝㻝㻢㻝 䝝䜲䝖䝹䜽䝗䝷䜲䝤䝧䝹䝖䠄㻟㻡㻝㼙㼙䠅 㻴㼕㼓㼔㻌㼀㼛㼞㼝㼡㼑㻌㻰㼞㼕㼢㼑㻌㻮㼑㼘㼠䠄㻟㻡㻝㼙㼙䠅
㼆㼀㻝㻝㻢㻢 㻢㻟㻜䝯䝍䝹䝅䞊䝹䝗䝧䜰䝸䞁䜾㻔㻡㼤㻟㼤㻜㻚㻞䝇䝔䞁䝺䝇䝅䝮௜ᒓ㻕 㻢㻟㻜㻌㼙㼑㼠㼍㼘㻌㼟㼔㼕㼑㼘㼐㻌㼎㼑㼍㼞㼕㼚㼓㻌㻔㻡㼤㻟㼤㻜㻚㻞㻌㼟㼠㼍㼕㼚㼘㼑㼟㼟㻌㼟㼔㼕㼙㻌㼕㼚㼏㼘㼡㼐㼑㼐㻕
㼆㼀㻝㻝㻢㻣 㻤㻡㻜䝷䝞䞊䝅䞊䝹䝗䝧䜰䝸䞁䜾㻔㻣㼤㻡㼤㻜㻚㻝䝇䝔䞁䝺䝇䝅䝮௜ᒓ㻕 㻤㻡㻜㻌㼞㼡㼎㼎㼑㼞㻌㼟㼔㼕㼑㼘㼐㻌㼎㼑㼍㼞㼕㼚㼓㻌㻔㻣㼤㻡㼤㻜㻚㻝㻌㼟㼠㼍㼕㼚㼘㼑㼟㼟㻌㼟㼔㼕㼙㻌㼕㼚㼏㼘㼡㼐㼑㼐㻕
㼆㼀㻝㻝㻢㻤 㻥㻡㻜䝷䝞䞊䝅䞊䝹䝗䝧䜰䝸䞁䜾㻔㻣㼤㻡㼤㻜㻚㻝䝇䝔䞁䝺䝇䝅䝮௜ᒓ㻕 㻥㻡㻜㻌㼞㼡㼎㼎㼑㼞㻌㼟㼔㼕㼑㼘㼐㻌㼎㼑㼍㼞㼕㼚㼓㻌㻔㻣㼤㻡㼤㻜㻚㻝㻌㼟㼠㼍㼕㼚㼘㼑㼟㼟㻌㼟㼔㼕㼙㻌㼕㼚㼏㼘㼡㼐㼑㼐㻕
㼆㼀㻝㻝㻢㻥 㻹㻟㼤㻡ᑠ㢌ప㢌䝡䝇䠄㻝㻚㻡㼙㼙භゅ✰௜䛝䠅 㻹㻟㼤䠑㻌㻿㼙㼍㼘㼘㻌㻴㼑㼍㼐㻌㻒㻌㻸㼛㼣㻌㻴㼑㼍㼐㻌㻿㼏㼞㼑㼣㻌㻔㼣㼕㼠㼔㻌㻝㻚㻡㻌㼙㼙㻌㼔㼑㼤㼍㼓㼛㼚㼍㼘㻌㼔㼛㼘㼑㻕
㼆㼀㻝㻝㻣㻜 㻹㻞㼤㻡䝻䞊䝦䝑䝗䝡䝇䠄㻗㻌㻺㼛㻘㻜䠅 㻹㻞㼤㻡㻌㻸㼛㼣㻌㻴㼑㼍㼐㻌㻿㼏㼞㼑㼣㻌㻔㻗㻌㻺㼛㻘㻌㻜㻕
㼆㼀㻝㻝㻣㻝 㻹㻝㻚㻢䡔㻡䜻䝱䝑䝥䝡䝇䠄㻝㻚㻡㼙㼙භゅ✰௜䛝䠅 㻹㻝㻚㻢㼤㻡㻌㻯㼍㼜㻌㻿㼏㼞㼑㼣㻌㻔㼣㼕㼠㼔㻌㻝㻚㻡㼙㼙㻌㼔㼑㼤㼍㼓㼛㼚㼍㼘㻌㼔㼛㼘㼑㻕
㼆㼀㻝㻝㻣㻞 䜰䝹䝭䝃䞊䝪䝬䜴䞁䝖 㻭㻸㼁㻌㻿㼑㼞㼢㼛㻌㻹㼛㼡㼚㼠㻌
㼆㼀㻝㻝㻤㻣 䜹䞊䝪䞁䝅䝱䞊䝅䚷㼆㼑㼠㼞㼕㼏㼗㼟㻌㼀㼥㼜㼑㻌㻹㻵㻰㻌㼀㻠㻌㻓㻝㻡㻙㻓㻝㻥⏝ 㻳㼞㼍㼜㼔㼕㼠㼑㻌㻯㼔㼍㼟㼟㼕㼟㻌㼒㼛㼞㻌㼆㼑㼠㼞㼕㼏㼗㼟㻌㼀㼥㼜㼑㻌㻹㻵㻰㻌㼒㼛㼞㻌㼀㻠㻌㻓㻝㻡㻙㻓㻝㻥
㼆㼀㻝㻝㻤㻤 䜹䞊䝪䞁䜰䝑䝟䞊䝕䝑䜻䚷㼆㼑㼠㼞㼕㼏㼗㼟㻌㼀㼥㼜㼑㻌㻹㻵㻰㻌㼀㻠㻌㻓㻝㻡㻙㻓㻝㻥⏝ 㻳㼞㼍㼜㼔㼕㼠㼑㻌㼁㼜㼜㼑㼞㻌㻰㼑㼏㼗㻌㼒㼛㼞㻌㼆㼑㼠㼞㼕㼏㼗㼟㻌㼀㼥㼜㼑㻌㻹㻵㻰㻌㼒㼛㼞㻌㼀㻠㻌㻓㻝㻡㻙㻓㻝㻥
䝇䝨䜰䞊䝟䞊䝒

3
ฌ৿৖ષয় Assembling of drive parts
ংজشঃشહ Installation of battery stopper
ZT1149
ALU Main Gear Holder
ｱﾙﾐﾒｲﾝｷﾞｱﾎﾙﾀﾞｰ
ZT1149
ALU Main Gear Holder
ｱﾙﾐﾒｲﾝｷﾞｱﾎﾙﾀﾞｰ
ZT1149 include
M3x6 Flat Head Screw
M3x6ﾌﾗｯﾄﾍｯﾄﾞｽｸﾘｭｰ
Spur Gear 【Not included】
Please use for touring cars such as thosemade by AXON. (Up to 64P110T)
別売りの AXON 製などﾂｰﾘﾝｸﾞｶｰ用を使用してください。（64P110T まで）
Note
When using a screw other than the one providedor a Spur gear other than the
recommended one, make sure that the head or tip of the screw doesnot come out.
付属のﾌﾗｯﾄﾞﾍｯﾄﾞｽｸﾘｭｰ以外のﾋﾞｽや推奨以外のｽﾊﾟｰｷﾞｱを使用する場合はﾋﾞｽの頭や
先端が出ていないことを確認してください。
ZT1074 include
Ball Bearing 5x8x2.5 Rubber shield
850ﾗﾊﾞｰｼｰﾙﾄﾞﾍﾞｱﾘﾝｸﾞ
ZT1050
ALU21T Pulley
ｱﾙﾐ21Tﾌﾟｰﾘｰ
ZT1050 includeor ZT1171
M1.6x5 Cap Screw
M1.6ｘ5ｷｬｯﾌﾟﾋﾞｽ
ZT1050
ALU21T Pulley
ｱﾙﾐ21Tﾌﾟｰﾘｰ
ZT1148 included
ؙ[[PPVWDLQOHVVVWHHOVKLP
ؙ[[PPӁӇӡӞӁӀӕ
ZT1074 include
Ball Bearing 5x8x2.5 Rubber shield
850ﾗﾊﾞｰｼｰﾙﾄﾞﾍﾞｱﾘﾝｸﾞ
ZT1050 includeor ZT1171
M1.6x5 Cap Screw
M1.6ｘ5ｷｬｯﾌﾟﾋﾞｽ
ZT1148
ؙ&DUERQ6WHHO0DLQ*HDU6KDIW
ؙҺҴӒӢӡӁӅҴӝӖҶӡһӢҵӀҰӐӈ
Note
It is recommended to apply grease suitable for the application
to the parts where metal parts overlap and rotate, such as the
outside of ball bearings.
ﾎﾞｰﾙﾍﾞｱﾘﾝｸﾞの外側など、金属のﾊﾟｰﾂが重なり
回転する部分には用途に合ったｸﾞﾘｽを塗布すること
をお勧めします。
Note
Please be careful not to overtighten the screws
as they are thin. Apply a small amount of screw
lock agent to the tip.
ﾋﾞｽが細いので力強く締めすぎないように
ご注意ください。先端に少量のﾈｼﾞﾛｯｸ剤を
塗布してください。
ZT1054 include
7mmALU Counter Sunk Shim
7mm皿ﾜｯｼｬｰ
ZT1054 include
7mmALU Counter Sunk Shim
7mm 皿ﾜｯｼｬｰ
ZT1154
ALU Motor Mount
ｱﾙﾐﾓｰﾀｰﾏｳﾝﾄ
Note
ؙӎӢҳӇӜҴӒӣӀӢӀҲӡડ୎৿
ؙুӀӕӁӑӣҴҿҴઞ৷؛
ؙ3OHDVHXVH\RXURZQVKLPVRUVSDFHUVWR
ؙPRYHWKHEDWWHU\SRVLWLRQRXWZDUGV
ZT1154 include
M3x6 Flat Head Screw
M3x6ﾌﾗｯﾄﾍｯﾄﾞｽｸﾘｭｰ
ZT1154 include
M3x6 Flat Head Screw
M3x6ﾌﾗｯﾄﾍｯﾄﾞｽｸﾘｭｰ
Thiskitusesadedicated21Tpulley.(Standardis20T)
Pleasecalculatethesecondarygearratioat1.8095.
当キットでは専用の21Tプーリーを使用します。（標準は20T）
二次減速比は1.8095で計算してください。
IN FRONT
REAR SIDE
NotInclude
別売
NotInclude
別売

4
ZeroTribe Conversion Kit Series
ঋঝটشছشહ Installation of Belt Guide Roller
①
②
②
①
③
③
④
④
⑤
⑤
ZT1151 include or ZT1153
CarbonSteelFlangeNutSmallforΦ5
ｶｰﾎﾞﾝｽﾁｰﾙﾌﾗﾝｼﾞﾅｯﾄΦ5 用【小】
ZT1151 include or ZT1168
950rubbershieldbearing
950ﾗﾊﾞｰｼｰﾙﾄﾞﾍﾞｱﾘﾝｸﾞ
ZT1151 include or ZT1168
7x5x0.1Stainlessshim
7x5x0.1ｽﾃﾝﾚｽｼﾑ
ZT1151 include or ZT1168
950rubbershieldbearing
950ﾗﾊﾞｰｼｰﾙﾄﾞﾍﾞｱﾘﾝｸﾞ
ZT1151 include or ZT1168
7x5x0.1Stainlessshim
7x5x0.1ｽﾃﾝﾚｽｼﾑ
ZT1151 include
M3x5Buttonheadscrew
M3x5ﾎﾞﾀﾝﾍｯﾄﾞｽｸﾘｭｰ
ﾌﾗﾝｼﾞﾅｯﾄ【小】3組を組立てます。
Assemble3setsofflangenuts[small].
Note
ؙ[[ӁӇӡӞӁӀӕહ
ؙরି؛
ؙா૘୤ӑӢҵӜӡҼӢҹҶӝӀӕએ࿗ഘ
ؙয়؛
ؙ3OHDVHEHFDUHIXOQRWWRGHYLDWHIURPWKH
ؙFHQWHUZKHQLQVWDOOLQJWKH[[
ؙVWDLQOHVVVWHHOVKLP
ؙ$SSO\LQJDYHU\VPDOODPRXQWRIEHDULQJ
ؙRLOWRWKHVXUIDFHRIWKHVKLPZLOOPDNHLW
ؙHDVLHUWRDVVHPEOH
ঝ঑ঔششঐথএહ Installation of Belt Guide Roller
ঝ঑ওথকইش  ش঎থওথকইইشહ
Installation of ALU Main Gear Shaft Stay,GraphiteMainGearShaftStiffener
IN FRONT
REAR SIDE
IN FRONT REAR SIDE
IN FRONT
REAR SIDE
ZT1151
include or ZT1153
CarbonSteelFlangeNutSmallforΦ5
ｶｰﾎﾞﾝｽﾁｰﾙﾌﾗﾝｼﾞﾅｯﾄΦ5 用【小】
ZT1155
ALU Motor Mount Post
ｱﾙﾐﾓｰﾀｰﾏｳﾝﾄﾎﾟｽﾄ
ZT1155
ALU Motor Mount Post
（Mountingpositioncanbechanged）
ｱﾙﾐﾓｰﾀｰﾏｳﾝﾄﾎﾟｽﾄ（取付位置変更可能）
ZT1155 include or ZT1169
M3x５Small Head & Low Head Screw
(with 1.5 mm hexagonal hole)
M3x５小頭低頭ﾋﾞｽ（1.5mm 六角穴付き）
ZT1155 include or ZT1169
M3x５Small Head & Low Head Screw
(with 1.5 mm hexagonal hole)
M3x５小頭低頭ﾋﾞｽ（1.5mm 六角穴付き）
ZT1157
Graphite Main Gear Shaft Stiffener
ｶｰﾎﾞﾝﾒｲﾝｷﾞｱｼｬﾌﾄｽﾃﾌﾅｰ
ZT1157 include
M3x6 Flat Head Screw
M3x6ﾌﾗｯﾄﾍｯﾄﾞｽｸﾘｭｰ
ZT1156
ALU Main Gear Shaft Stay
ｱﾙﾐﾒｲﾝｷﾞｱｼｬﾌﾄｽﾃｰ
ZT1156 include
M3x6 Flat Head Screw
M3x6ﾌﾗｯﾄﾍｯﾄﾞｽｸﾘｭｰ
Note
GraphiteMainGearShaftStiffener
canbeinstalledafterinstallingthecenterpulley.
ｶｰﾎﾞﾝﾒｲﾝｷﾞｱｼｬﾌﾄｽﾃﾌﾅｰはｾﾝﾀｰﾌﾟｰﾘｰを取付けた後
に装着でも可。

5
ঋঝথঙشહ Installation of Belt Tensioner ZT1158
include
M3x15ALUButton Head Screw
M3x15ｱﾙﾐﾎﾞﾀﾝﾋﾞｽ
ZT1158 include or ZT1166
630MetalShieldBearing
630ﾒﾀﾙｼｰﾙﾄﾞﾍﾞｱﾘﾝｸﾞ
ZT1158 include or ZT1166
630MetalShieldBearing
630ﾒﾀﾙｼｰﾙﾄﾞﾍﾞｱﾘﾝｸﾞ
ZT1158 include or ZT1166
5x3x0.2StainlessShim
5x3x0.2ｽﾃﾝﾚｽｼﾑﾞ
ZT1158 include or ZT1166
5x3x0.2StainlessShim
5x3x0.2ｽﾃﾝﾚｽｼﾑﾞ
ZT1158 include
6x3x3ALUWasher
6x3x3ｱﾙﾐｽﾍﾟｰｻｰ
ZT1158 include
BeltTensionerPost
ﾍﾞﾙﾄﾃﾝｼｮﾅｰﾎﾟｽﾄ
ZT1158 include
M3ALUNylonNutThinType
M3ｱﾙﾐ薄型ﾅｲﾛﾝﾅｯﾄ
ZT1158 include
M2x5LowHeadScrew
(Pleaseusetheincluded+miniscrewdriver.)
M2x5ﾛｰﾍｯﾄﾞﾋﾞｽ
( 付属の +ﾐﾆﾄﾞﾗｲﾊﾞｰをご利用ください。)
Upper Deck
ｱｯﾊﾟｰﾃﾞｯｷ
ঔششঐথ  ঋঝહ Installation of Motor mount
ZT1161
High Torque Drive Belt（351mm）
ﾊｲﾄﾙｸﾄﾞﾗｲﾌﾞﾍﾞﾙﾄ（351mm）
ZT1161
High Torque Drive Belt（351mm）
ﾊｲﾄﾙｸﾄﾞﾗｲﾌﾞﾍﾞﾙﾄ（351mm）
ZT1188
Graphite Chassis for Zetricks Type MID for T4 '15-'19
ｶｰﾎﾞﾝｼｬｰｼZetricksTypeMIDT4'15-'19 用
ZT1188
Graphite Upper Deck for Zetricks Type MID for T4 '15-'19
ｶｰﾎﾞﾝｱｯﾊﾟｰﾃﾞｯｷZetricksTypeMIDT4'15-'19 用
ZT1158
Belt Tensioner Set
ﾍﾞﾙﾄﾃﾝｼｮﾅｰｾｯﾄ
ZT1154 include
M3x8 Flat Head Screw
M3x8ﾌﾗｯﾄﾍｯﾄﾞｽｸﾘｭｰ
ZT1154 include
M3x5 Flat Head Screw
M3x5ﾌﾗｯﾄﾍｯﾄﾞｽｸﾘｭｰ
ZT1148 included
ؙ[[PPVWDLQOHVVVWHHOVKLP
ؙ[[PPӁӇӡӞӁӀӕ
ZT1148 include
M3x8 Flat Head Screw
M3x8ﾌﾗｯﾄﾍｯﾄﾞｽｸﾘｭｰ
ZT1148 include
M3x6 Flat Head Screw
M3x6ﾌﾗｯﾄﾍｯﾄﾞｽｸﾘｭｰ
①
②
③
④
ঃشહ Installation of Upper Deck
Note
,IWKHPRWRUXVHGLQWHUIHUHVZLWKWKHXSSHUGHFN
VFUDSHWKHUHOHYDQWSDUWZLWKDOHXWRURUrOH
ઞ৷ӗҴӄҴҵҳӎӣҴӇӢҳһ๝௱ৃ়ؚ
ჾ৖ীӜұҴӄҴӘӁӜಉచ؛
Note
GraphiteMainGearShaftStiffener
canbeinstalledafterinstallingthecenterpulley.
ｶｰﾎﾞﾝﾒｲﾝｷﾞｱｼｬﾌﾄｽﾃﾌﾅｰはｾﾝﾀｰﾌﾟｰﾘｰを取付けた後
に装着でも可。
IN FRONT
REAR SIDE
IN FRONT
REAR SIDE
IN FRONT
REAR SIDE
ZT1172
ALU Servo Mount
ｱﾙﾐｻｰﾎﾞﾏｳﾝﾄ

6
ZeroTribe Conversion Kit Series
ঝ঑ঃشঃش৷ইছথঅ  কشইشહ
Installation of ALUFlange Screw for Upper Deck Stopper,GraphiteChassisStiffener
ZT1160
ALUFlange Screw for Upper Deck Stopper
ｱﾙﾐｱｯﾊﾟｰﾃﾞｯｷｽﾄｯﾊﾟｰ用ﾌﾗﾝｼﾞﾋﾞｽ
ZT1160 include
6x3x0.5ALUWasher
Placeitbetweentheupperdeckandthemotormountpost.
6x3x0.5ｱﾙﾐｽﾍﾟｰｻｰ
ｱｯﾊﾟｰﾃﾞｯｷとﾓｰﾀｰﾏｳﾝﾄﾎﾟｽﾄの間に入れます。
ScrewsincludedintheT4kit
T4ｷｯﾄ付属のﾋﾞｽ
ScrewsincludedintheT4kit
T4ｷｯﾄ付属のﾋﾞｽ
ঋঝথঙش  কشইঞ৹ତ
About adjustment of belt tensioner and chassis flex
②シャーシフレックスの調整について
Zetricks にはﾓｰﾀｰﾏｳﾝﾄをｼｬｰｼに固定するﾋﾞｽの位置を変更することでｼｬｰｼの
ﾌﾚｯｸｽを調整することができます。標準の位置は☆印の場所です。
②Aboutadjustmentofchassisflex
Zetricksallowsyoutoadjusttheflexofthechassisbychangingthe
positionofthescrewsthatsecurethemotormounttothechassis.
Thestandardpositionisthelocationmarkedwithastar.
☆標準固定位置
☆Standardfixedposition
ম௓တ About basic recommendation set
ZT1159 include
GraphitePlate,
M3x5 Flat Head Screw,M3 FlangeNut,
ｶｰﾎﾞﾝﾌﾟﾚｰﾄ,M3x5ﾌﾗｯﾄﾍｯﾄﾞｽｸﾘｭｰ,M3ﾌﾗﾝｼﾞﾅｯﾄ
PleaseusetheM3x8buttonheadscrewsincludedwiththiskit
wheninstallingthemotor.
モーターを取付けする時は当キットに付属の M3x8ボタンヘッド
スクリューを使用してください。
①Aboutadjustingthebelttensioner
Zetrickshasamechanismtoadjustthetensionofthebeltinoneplace
ontheupperdeckandthreeplacesonthemotormount.Adjusttheposition
sothatthebearingsmakelightcontact.Ifyouhitithard,itwillleadtodrive
loss.Iftherearbeltisraisedtoomuch,itwillinterferewiththepiniongear
andleadtowearofthebelt.Pleasebecareful.
①ベルトテンショナーの調整について
Zetricks にはｱｯﾊﾟｰﾃﾞｯｷ上に 1 箇所、ﾓｰﾀｰﾏｳﾝﾄに 3 箇所のﾍﾞﾙﾄのﾃﾝｼｮﾝ
を調整する機構があります。ﾍﾞｱﾘﾝｸﾞが軽く接触するように位置を調節し
てください。強く当たると駆動ﾛｽにつながります。ﾘｱﾍﾞﾙﾄを上げすぎる
とﾋﾟﾆｵﾝｷﾞｱと干渉しﾍﾞﾙﾄの摩耗につながります。ご注意ください。
IN FRONT
REAR SIDE
Zetricks Type MID for T4 '15-'19 Bacic Setup Sheet
Front Rear
䚷RideHeight 䠄ৈ䠅5.0mm 5.2mm
䚷Camberقকথংشഓك -1.5° -2.0°
䚷Toe angleقشഓك 1.0°䠄Out) IN䚷2.5°
䚷Shock oil 䠄ঙঝ䠅INFINITY䚷䠀㻠㻡㻜 INFINITY䚷䠀㻠㻡㻜
䚷Shock Spring䠄ঙউজথ䠅SMJ2.9 SMJ2.9
䚷Down Stop䛆Suspin center䛇ঝشউৈআথর 9.5mm 8.5mm
䚷Anti-Roll Barقঅছشك 1.3 1.3
䚷Differential gearOil䠄䝕䝣䜸䜲䝹䠅 INFINITY䚷#6000
䚷Steering block shim䠄䝇䝔䜰䝸䞁䜾䝤䝻䝑䜽䝅䝮䠅 㻝㻚㻜䡉䡉 
䝇䝔䜰䝸䞁䜾䝫䝇䝖ୗ䛻1.0䡉䡉ཌ䛾䝽䝑䝅䝱䞊䜢ධ䜜䜛䚹䠄䝧䝹䝖䛾ᖸ΅䜢㜵䛠Ⅽ䠅
Insert a 1.0 mm thick washer under the steering post.(To prevent belt interference)

7
উঙথঃشງஂ Introduction of optional parts
ZT1077
Low Friction Drive Belt（351mm）
ﾛｰﾌﾘｸｼｮﾝﾄﾞﾗｲﾌﾞﾍﾞﾙﾄ（351mm)
౥઺൸؞5& ও࿌ൗ୻ Completed image
・R/C mechanism mounting example
ZT1065
ALU Floating Servo Mount Orange
ｱﾙﾐﾌﾛｰﾃｨﾝｸﾞｻｰﾎﾞﾏｳﾝﾄｵﾚﾝｼﾞ
ZT1066
ALU Floating Servo Mount Black
ｱﾙﾐﾌﾛｰﾃｨﾝｸﾞｻｰﾎﾞﾏｳﾝﾄﾌﾞﾗｯｸ
ZT1163
High Torque Drive Belt（300mm）
ﾊｲﾄﾙｸﾄﾞﾗｲﾌﾞﾍﾞﾙﾄ（300mm)
ThispartisrequiredwhenchangingfromMIDtoMR.
MID から MR に変更の場合、必要なﾊﾟｰﾂです。
ZT1164
Low Friction Drive Belt（405mm）
ﾛｰﾌﾘｸｼｮﾝﾄﾞﾗｲﾌﾞﾍﾞﾙﾄ（405mm)
ThispartisrequiredwhenchangingfromMIDtoMR.
MID から MR に変更の場合、必要なﾊﾟｰﾂです。
ZT1165
Low Friction Drive Belt（300mm）
ﾛｰﾌﾘｸｼｮﾝﾄﾞﾗｲﾌﾞﾍﾞﾙﾄ（300mm)
ThispartisrequiredwhenchangingfromMIDtoMR.
MID から MR に変更の場合、必要なﾊﾟｰﾂです。
ZT1173
Graphite Floating Servo Holder
ｶｰﾎﾞﾝﾌﾛｰﾃｨﾝｸﾞｻｰﾎﾞﾎﾙﾀﾞｰ
ZT1190
Graphite Chassis Zetricks Type MR for T4 '15-'19
ｶｰﾎﾞﾝｼｬｰｼZetricksTypeMRT4'15-'19 用
ThispartisrequiredwhenchangingfromMRtoMID.
MID から MR に変更の場合、必要なﾊﾟｰﾂです。
ZT1191
Graphite Upper Deck
Zetricks Type MR for T4 '15-'19
ｶｰﾎﾞﾝｱｯﾊﾟｰﾃﾞｯｷ
ZetricksTypeMRforT4 '15-'19 用
ThispartisrequiredwhenchangingfromMRtoMID.
MID から MR に変更の場合、必要なﾊﾟｰﾂです。
ZT1192
Graphite Upper DeckNarrowType
Zetricks Type MID for T4 '15-'19
ｶｰﾎﾞﾝｱｯﾊﾟｰﾃﾞｯｷﾅﾛｰﾀｲﾌﾟ
ZetricksTypeMIDT4 '15-'19 用
ZT1189
Graphite Upper Deck Narrow Type
Zetricks Type MID for T4 '15-'19
ｶｰﾎﾞﾝｱｯﾊﾟｰﾃﾞｯｷﾅﾛｰﾀｲﾌﾟ
ZetricksTypeMIDforT4 '15-'19 用

ZEROTRIBE
52-1,8-C,Otsubo,Fujie,Higashiura-cho,Chita-gun,Aichi-ken,Japan 470-2105
টছঈؙٿ ఎ໡ূఓ঴ઢ௖পཁ &(PDLOLQIR#]HURWULEHMDSDQFRP