BaByliss for MEN 7235U User manual

Model 7235U
10-IN-1 TITANIUM GROOMING SYSTEM
7235U IB-18/189.indd 1 4/20/18 12:48 PM

10-IN-1 TITANIUM GROOMING SYSTEM
A versatile multi trimmer kit for all over face and body grooming. The
10 in 1 Titanium Grooming System has titanium blade technology for
smooth and precise cutting. It features 5 different interchangeable
cutting heads to trim, shave and shape face and body hair.
FEATURES
• Rechargeable trimmer with 5 interchangeable attachment heads.
• Precision Trimmer (0.5mm) with titanium blade technology for extreme
precision and sharpness. An attachable 5-position comb guide (3-
15mm) or 3 jawline blending combs (3mm, 5mm & 7mm).
• Body Groomer (0.5mm) with 5-position comb guide (3-15mm).
• Detail Trimmer for creating lines and effects in the hair.
• Nose & Ear Trimmer for the safe and easy removal of unwanted hair.
• Foil Shaver for a clean, smooth nish.
• Taper control for precision cut adjustment.
• Turbo boost for increased power at the touch of a button.
• Beard and moustache comb.
• Charging and storage stand.
• Cleaning brush.
• Lubricating oil.
• 3 year guarantee.
7235U IB-18/189.indd 2 4/20/18 12:48 PM

SAFETY CAUTIONS
• This appliance should only be used as described within
this instruction book. Please retain for reference.
IMPORTANT CHILD SAFETY
WARNING! Polythene bags over the product or packaging
may be dangerous. To avoid danger of suffocation, keep
away from babies and children. These bags are not toys.
IMPORTANT SAFETY
• Do not immerse the appliance in water or other liquids.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged or if the
appliance has been dropped. In the event of damage
contact the Conair Customer Care Line (refer to UK After
Sales Service section for further information).
• Only use the attachments supplied with this appliance.
• Do not leave the appliance unattended when switched
on.
• Do not place the appliance on any surface whilst in
operation.
• Special care is required when using the appliance close
to the ears, eyes and face.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.
7235U IB-18/189.indd 3 4/20/18 12:48 PM

• Careful adult supervision is required when this appliance
is used on or near children. Do not use on very young
children.
• This appliance should not be used, cleaned or maintained
by children. Keep out of reach of children.
• Always ensure that this appliance is kept out of the reach
of children at all times, particularly during use and whilst
cooling.
• Allow the appliance to cool before storing away.
• This product contains batteries (NiMH rechargeable
2.4V) that are not to be removed from the appliance for
charging.
• The batteries in this appliance are non-replaceable by the
end user. Only an authorised engineer should perform
this task for safety reasons.
• The supply terminals are not to be short circuited.
• For indoor, household, domestic use only.
• For the purposes of recharging the battery, only use
the detachable charging supply unit provided with this
appliance.
• This product complies fully with all appropriate EU
and UK Legislation and the standards relevant to this
type and class of appliance. We are an ISO9001:2015
credited company that continually evaluates our Quality
Management System performance. If you have any
queries regarding product safety and compliance, please
contact the Conair Customer Care Line (refer to «UK After
Sales Service» section).
• The battery should be removed for safe disposal at the
end of its life.
7235U IB-18/189.indd 4 4/20/18 12:48 PM

INSTRUCTIONS FOR USE
IMPORTANT! Only use the adaptor and attachments supplied with
this appliance.
Inserting the Adaptor Cord into the Stand
• Remove the trimmer and accessories from the stand.
• Insert the adaptor plug into the hole on the base of the stand and
push rmly into position.
• Route the cord through the channel on the base of the stand and
secure in place.
• Should you wish to charge the appliance without using the charging
stand, simply place the adaptor plug directly into the main trimmer
unit.
Charging the Appliance
• This trimmer is equipped with Ni-MH batteries.
• Before using for the rst time, the appliance should be fully charged
continuously for 16 hours. This initial super-charge ensures optimum
power performance to ensure smooth fast trimming every time.
• A full charge will provide approximately 30 minutes use.
• Ensure the appliance is switched off.
• Insert the appliance into the charging and storage stand.
• The charging indicator light will illuminate when the appliance is
correctly inserted into the charging stand and connected to the
mains.
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries,
the trimmer should be fully discharged and then recharged for 16 hours
every 3 months.
Preparation for Use
• Always inspect the appliance before use for noticeable signs of
damage. Do not use if damaged.
• Ensure the heads are free from hair and debris and that the blades
are properly oiled (refer to Cleaning & Maintenance section for further
information).
7235U IB-18/189.indd 5 4/20/18 12:48 PM

• Ensure the appliance is sufciently charged.
• Use on clean, dry hair that has been combed until tangle-free.
Changing the Heads
• Before changing the heads, ensure the appliance is switched off.
• To remove a head, hold the handle of the appliance with one hand,
hold the head with the other hand and pull the head back and away
from the front of the handle.
• To attach a head, the driving pin (see diagram) needs to be in a central
position. If it is not in the centre, manually move the pin into position.
Then, making sure that the base of the head is seated in the handle,
click the head into position. Make sure taper control is set to position
number 1 when changing head.
driving pin
7235U IB-18/189.indd 6 4/20/18 12:48 PM

Comb Guides
5-Position Comb Guide For Precision Trimmer:
• Ensure the appliance is switched off.
• Attach the Precision Trimmer head.
• Slide the smaller of the 2 comb guides onto the
front of the Precision Trimmer head and push
down at the rear to lock into place – you will hear
a clicking noise when it’s in position.
• The comb guide will be set to the shortest of the
ve cutting lengths.
• To adjust the cutting length, push the button and
click the guide forward to the required position. The comb guide has
5 length settings, 3mm, 6mm, 9mm, 12mm & 15mm.
• To remove the comb, gently lift the guide off the head by lifting the
rear section.
Jaw Line Blending Combs for Precision
Trimmer:
• Ensure the appliance is switched off.
• Attach the Precision Trimmer head.
• The combs come in 3 different length settings, I
= 3mm, II = 5mm and III = 7mm.
• Slide the desired jaw line comb over the trimmer
head, pull down over the rear of the head and
click into position.
• To remove the comb, lift the rear of the guide upward and away from
the Precision Trimmer head.
5-Position Comb Guide For Body Groomer:
• Ensure the appliance is switched off.
• Attach the Body Groomer head.
• Slide the larger of the 2 comb guides onto the
front of the Body Groomer head and push down
at the rear to lock into place – you will hear a
clicking noise when it’s in position.
7235U IB-18/189.indd 7 4/20/18 12:48 PM

• The comb guide will be set to the shortest of the ve cutting lengths.
• To adjust the cutting length, push the button and click the guide
forward to the required position. The comb guide has 5 length
settings, 3mm, 6mm, 9mm, 12mm & 15mm.
• To remove the comb, gently lift the guide off the head by lifting the
rear section.
Taper Control
The taper control with 3-position switch (on the rear of the handle)
enables super ne cut adjustment for precision trimming.
• The trimmer will be set to it’s shortest cutting length of 0.5mm with
the number 3 visible below the taper control switch.
• To increase the length by 0.5mm to a cutting length of 1mm, slide the
switch down so 2 is visible above the taper control switch.
• To increase the length by a further 0.5mm to a cutting length of
1.5mm, slide the switch down so both 1 and 2 are visible above the
taper control switch.
NOTE: The taper control function can only be used with the Precision
Trimmer and Body Groomer heads.
TRIMMING
Precision Trimmer
Using the Precision Trimmer with 5-position
comb guide:
• Attach the smaller of the 5-position comb
guides and select the required length
(3-15mm).
• If you require more than one cutting length,
start with the longest length rst.
• Adjust the taper control for super ne cut
adjustment as required.
• Switch the trimmer on.
• Hold the trimmer with the teeth of the trimmer pointing upwards, yet
7235U IB-18/189.indd 8 4/20/18 12:48 PM

at against the skin.
• Move the trimmer upwards and outward through the hair, against the
direction of hair growth.
• The trimmer will work most efciently when cutting through hair at its
own speed.
• For increased trimming performance, press and hold the turbo
button, this is often necessary for thicker areas of hair.
• Never switch the appliance off whilst in the hair.
• Note: The Precision Trimmer can be used without any comb guides
and will cut roughly to a length of 0.5mm.
Using the Precision Trimmer with jaw line blending combs:
• Attach one of the three jaw line blending combs (I = 3mm, II = 5mm
and III = 7mm).
• If you require more than one cutting length, start with the longest
length rst (7mm).
• Switch the trimmer on.
• Hold the trimmer with the teeth of the trimmer pointing upwards, yet
at against the skin.
• Move the trimmer upwards and outward through the hair you wish
to blend.
• To blend-in a shorter length use a smaller jaw line comb and use in
the same way as above.
• The trimmer will work most efciently when cutting through hair at its
own speed.
• For increased trimming performance, press and hold the turbo
button, this is often necessary for thicker areas of hair.
• Never switch the appliance off whilst in the hair.
To outline using the Precision Trimmer:
• Do not attach a comb guide.
• Hold the trimmer upside down with the blade facing downwards, yet
at against the skin.
• Move the trimmer gently downwards in small strokes around the
edge of the area you wish to outline.
7235U IB-18/189.indd 9 4/20/18 12:48 PM

• Having dened the outline, hold the trimmer with the blades pointing
upwards, yet at against the skin and move the trimmer upwards
against the direction of hair growth. This will trim the unwanted hair
adjacent to the outline.
Body Groomer
Using the Body Groomer with 5-position comb
guide:
• Attach the larger of the 5-position comb guides
and select the required length (3-15mm).
• Adjust the taper control for super ne cut
adjustment as required.
• Switch the trimmer on.
• Hold the trimmer with the teeth of the trimmer
pointing upwards, yet at against the skin.
• Move the trimmer upwards and outward through the hair, against the
direction of hair growth.
• Make sure to be particularly careful when trimming sensitive areas.
• The trimmer will work most efciently when cutting through hair at its
own speed.
• For increased trimming performance, press and hold the turbo
button, this is often necessary for thicker areas of hair.
• Never switch the appliance off whilst in the hair.
• Note: The Body Groomer can be used without any comb guides and
will cut roughly to a length of 0.5mm.
Foil Shaver
Using the Foil Shaver:
• For an ultra-smooth nish, use the foil shaver
attachment.
• Always ensure the foil is not damaged before each
use.
• Switch the trimmer on.
• Move the shaver gently over the skin, applying
minimal pressure and shaving in the direction of
hair growth.
7235U IB-18/189.indd 10 4/20/18 12:48 PM

• Make sure to be particularly careful when trimming sensitive areas.
• For increased trimming performance, press and hold the turbo
button, this is often necessary for thicker areas of hair.
• Never switch the appliance off whilst in the hair.
Nose & Ear Trimmer
Using the Nose & Ear Trimmer:
• For the safe and easy removal of unwanted nose
and ear hair use the rotary trimmer head.
• Switch the trimmer on.
• Insert the trimmer into the nose or ear and gently
move the trimmer in a circular motion.
• Onlyusethetrimmerattheentrancetotheearornose.
Do not use any deeper, as this could cause injury.
• For increased trimming performance, press and hold the turbo
button, this is often necessary for thicker areas of hair.
• Never turn the trimmer off whilst in the nose and ear hair.
Detail Trimmer
Using the Detail Trimmer:
• For accurate tramlines and detailed effects, attach
the Detail Trimmer head.
• Switch the trimmer on.
• Gently move the blade through the area of hair you
wish to trim.
• The trimmer will work most efciently when cutting
through hair at its own speed.
• For increased trimming performance, press and hold the turbo
button, this is often necessary for thicker areas of hair.
• Never turn the trimmer off whilst in the hair.
7235U IB-18/189.indd 11 4/20/18 12:48 PM

CLEANING & MAINTENANCE
To maintain optimum performance, the appliance should be cleaned
after each use:
• Remove the comb guide after use. Rinse under running water and dry
thoroughly before storage or use.
• Remove the trimmer head after use. The heads are washable for
easy cleaning. Rinse under running water and dry thoroughly before
storage or use.
• Do not disassemble the blades.
• Periodically, it may be necessary to oil the blades. After cleaning,
attach a trimmer head, switch on and oil the blades using a few
drops of the lubricating oil supplied. Only use the lubricating oil
supplied with the appliance as this is specically formulated for high
speed trimmers and does not evaporate or slow the blades.
• For instructions on how to re-attach the head, please refer to
‘‘Changing the Heads’’ section.
TO CLEAN THE FOIL SHAVER HEAD
• Press buttons on both sides of the shaver head
and remove the foil attachment for cleaning.
• Do not touch the shaver blade as it is sharp.
• Shaver foil is thin, handle with caution.
BATTERY DISPOSAL
To minimise hazards to health and the environment at the end of
this product’s life, laws dealing with Waste Electrical and Electronic
Equipment (WEEE) and The Waste Battery Directive require you to
dispose of these products and their batteries at a suitable collection
facility where they will be sent for appropriate recycling. Please contact
your local authorities for more details on recycling and safe disposal of
these in your area.
7235U IB-18/189.indd 12 4/20/18 12:48 PM

UK GUARANTEE
The Conair Group Ltd, Unit 3, Waterfront Business Park,
Fleet GU51 3TW
This BaByliss for Men appliance is guaranteed for consumer use for 3
years and is only valid within the United Kingdom.
This guarantee covers consumer use only i.e. defects occurring under
normal use within the home from date of purchase or date of delivery,
whichever is later.
If the product develops a fault due to defects in materials or manufacture
within 12 months from the date of purchase, to avoid delays and
unnecessary inconvenience, where possible please return the product
to the point of purchase for an exchange,
If the product develops a fault due to defects in materials or manufacture
after 12 months from the date of purchase, and within the guarantee
period, Conair UK After Sales Service will repair or replace the product.
Exclusions
This guarantee will no longer be valid meaning that The Conair Group
Ltd will not be liable to repair or replace your product where:
1.) The appliance has been used on a voltage supply other than that
which is marked on the product, or advised within this instruction
booklet
2.) The appliance has been purchased from an unauthorised stockist*
3.) The appliance is used for professional / non domestic usage
4.) Repairs or alterations have been attempted by unauthorised persons
5.) The failure of the appliance is a direct result of misuse
6.) The failure is a result of not following the instructions for use
This guarantee does not cover any cosmetic damage due to misuse
of the product nor any damage to persons or property that occurs
because of product misuse.
7235U IB-18/189.indd 13 4/20/18 12:48 PM

*unauthorised stockists include, but are not limited to online auction
sites, private sellers and those selling second hand goods, refurbished
products etc
Please contact the Conair Customer Care Line on 03705 133 191
(09:00 to 17:00 Monday to Friday) or e-mail [e-mail] for
further information on authorised stockists.
It is important to retain your proof of purchase. We recommend
attaching your receipt to this page.
Even where a refund may be applicable, no refund will be provided
without a valid receipt or proof of purchase, we will only be able
to offer a repair or replacement service. Please note this does
not apply if the product was purchased directly from The Conair
Group Ltd.
Guarantees on replacement products run from the original purchase
date or date of delivery, whichever is later, and not from the date of
replacement.
This guarantee is an additional benefit and does not affect your
statutory rights as a consumer.
If you have any queries regarding this guarantee please contact the
Conair Customer Care Line on 03705 133 191 (09:00 to 17:00 Monday
to Friday) or e-mail [e-mail]
7235U IB-18/189.indd 14 4/20/18 12:48 PM

UK AFTER SALES SERVICE
For further advice on using the appliance, contact the Conair Customer
Care Line on 03705 133191 (09:00 to 17:00 Monday to Friday) or email
your enquiry to [e-mail].
If you should need to return your appliance to us please send it to the
following address:
Customer Care Centre
Conair Logistics
Unit 4
Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your name and address, together with a copy of proof
of purchase and details of the fault.
Please note this Instruction Booklet is not the guarantee.
7235U IB-18/189.indd 15 4/20/18 12:48 PM

IB-18/189
7235U IB-18/189.indd 16 4/20/18 12:48 PM