BabySense Dreamer User manual

For any product related question please contact us at:
[email protected]
www.babysensemonitors.com
Dreamer
Sound & Light Machine

ENG
FRA
ITA
02-16
17-30
46-60
31-4561-76
SPAGER
By
Dreamer
Sound & Light Machine
Imported by Hisense Ltd.,
27 Shaked Street, Hevel Modi‘in Industrial Park, 731990 ISRAEL
Tel: +(972) 3 956 66 04
www.babysensemonitors.com

3
ENG
1. Overview
1.1 Pack Contents
Note: The Dreamer is supplied with a non-removable pre-
installed battery.
1.2 Device Overview
User ManualDevice USB Cable AC Adapter
Charging
Port
Charging
Indicator
Power
Reset
Serial
Number
Display

4
ENG
Note:
• Brightness Control – Press the Brightness Up or Brightness
Down button to increase or decrease the brightness of the
light. When the main light is off, pressing these buttons will
increase or decrease the brightness level of the clock and/or
temperature display.
• Color Control – Press the Cbutton to cycle through the
colors: you can select a solid color or the rainbow options
where the colors automatically switch every 5 seconds. Long
press to switch the light off.
Play/Pause Volume Up
Previous Sound Volume Down
Next Sound Brightness Up
Color Change Brightness Down
Long press to activate Standby
Mode & short press to reactivate and
change between favorite ambiances
Touch
Buttons

5
ENG
2. Getting Started
Step 1:
• Connect the power cable to the Dreamer and then plug it
into your electrical power outlet.
• Press power button to switch the Dreamer on (Illustration 1.2)
Step 2:
• Ensure your cellular device's Bluetooth and WiFi is ON
• Download the app: Use the QR Code below or search for
Babysense app in the Apple App Store or Google Play Store
and download to your cellular device.
• Follow app installation instructions
Note: The Babysense Dreamer is compatible with 2.4GHz
networks only.

6
ENG
Note: When turning the device on for the first time the
following will occur:
The backlights on the top panel will light up.
The Babysense Dreamer's body will illuminate in white
The letter Pwill appear on the clock/temperature display
and will blink for 3 minutes indicating the device is in pairing
mode. If no Pappears or to reactivate pairing mode press
and hold both and buttons together for 5 seconds.
3. Tips for Usage
• Charge Dreamer until the charging indicator changes from
red to green.
• When the battery is low and needs to be recharged, LO will
be seen on the display.
• The clock can be displayed in either 12hr or 24hr or you can
select to switch the time display off, through the app.
• The temperature can be displayed in either Fahrenheit or
Celsius or you can select to switch the temperature display
off, through the app.
1.
2.
3.

7
ENG
4. Troubleshooting
Problem Solution
The time displayed
is not accurate
To accurately set the time to your time
zone please download and connect to
the app.
The temperature
reading is not
correct, it is reading
higher
The Dreamer LEDs warm up when the
light is being used which may result in
the temperature reading being slightly
higher.
My Dreamer is non-
responsive
Reset the device by inserting a small,
firm object into the reset hole (found on
the bottom of the device) and press for
5 seconds.
Unable to connect
to Wi-Fi
Ensure your Wi-Fi is on.
Only supports 2.4GHz networks.

8
ENG
5. Warnings and Safety Instructions
Follow these safety precautions to prevent fire, injury or
damage to the product.
Read and keep instructions: It is very important that you read
all the safety and operating instructions before the Babysense
Dreamer Sound & Light Machine is operated.
Please retain your purchase receipt as you will need to
produce it if warranty service is required.
5.1 Important:
• Strangulation Hazard: Children can become entangled in
cords. Make sure the Sound & Light machine’s power adaptor
cable is kept out of reach of your baby and other young
children at all times.
• Choking Hazard: This product contains small parts which
may cause choking. Exercise care when unpacking and
assembling the product and keep the small parts away from
children.
• Risk Of Suffocation: Keep all packaging materials out of
reach of children.

9
ENG
• Do Not Handle Roughly, Drop Or Throw: Babysense Dreamer
Sound & Light Machine is a high-quality electronic device
which must be handled with care.
• This Product Is Not A Toy: It should be kept out of children's
reach.
• Water And Moisture: The product should not be exposed to
rain, moisture, or splashing. Never use or place the product
in or near moisture or water. This product is designed for
INDOOR USE ONLY. If the product becomes dirty, use a soft
cloth to wipe surfaces.
• Keep Away From Sources Of Heat: This unit should not be
exposed to direct heat sources such as a candle, stove,
radiator, heat register or other appliance that emit heat.
• Power Source: This product should only be used with the AC
power adapter supplied by the manufacturer, as included in
this package.
• Ventilation: This product should not be used on a bed,
sofa, rug or similar surface that may block the ventilation or
speaker openings, or be placed in an enclosed area, such as
a bookcase or drawer that may impede air flow. Never cover
the product with clothes, towels, blankets or any other item.

10
ENG
• Damage Requiring Service: This product should be serviced
by qualified personnel only.
• Do Not Try To Open And Repair The Product: If you have any
problems with the product, please contact the authorized
distributor or manufacturer. In case of unusual noises or
smells originating from the device, immediately disconnect
the product from the power outlet and contact the
authorized distributor or manufacturer.
5.2 Safety Instructions for AC Power Adapter
• The adapter should not be exposed to direct heat sources
such as a candle, stove, radiator, heat register or other
appliance that emit heat.
• During continual use, the power adapters may become
warm to the touch. This is normal and should not be a cause
of concern. Examine intactness of the power cord and its
plug.
• The adapter must be handled with care: Do not handle
roughly, drop or throw.
• When removing the power adapter from the wall outlet, hold
and pull from the receptacle.

11
ENG
• Do not pull on the cable itself or bend the cable as that
will put additional stress on the cable and could lead to
damages.
• Do not touch the power adapter with wet hands or allow
liquids to spill on it.
• Make sure the mains adaptor cables are kept out of reach
of your baby and other young children at all times. To avoid
possible danger from power cords, the cords should be
secured and never be hung on or near the crib.
• Do not replace the plugs or cable on your power adapter.
• Never cut, damage or bend the power cord.
• Do not put any objects on top of the power cord, which could
cause overheating, damage, combustion and electrocution.
• Do not leave the power adapter connected to the wall outlet
when it is not plugged into the Sound and Light Machine.
• Do not remove the warning label from the power cable.
WARNING:
• Do not replace the power cord with non-original substitutes.
Improper connection may cause electrocution.
• Do not place the AC adaptor cable in a high wear and tear
location. Never use a frayed or compromised cord.

12
ENG
5.3 Safety Instructions for Li-ion battery
(Non removable pre-installed battery)
• Do not attempt to open the device and replace the pre-
installed battery, as improper use may present a risk of fire,
explosion, or other hazards, and will invalidate the warranty.
• Do not attempt to repair or adjust any of the electrical or
mechanical functions of the unit.
• Do not dismantle, cut, open, crush, bend, puncture, or shred
cells or batteries.
• If a battery leaks, do not let the battery liquid touch skin or
eyes. If this happens, immediately flush the affected areas
with water, and seek medical assistance.
• The battery should not be exposed to direct sunlight or heat
sources such as a candle, stove, radiator, heat register or
other appliance that emit heat.
• Do not modify, remanufacture, attempt to insert foreign
objects into the battery, or immerse or expose it to water or
other liquids. Batteries may explode if damaged.
• If you believe the battery is damaged, remove product from
the charger and stop using the product.
• Never use a damaged battery.

13
ENG
5.4 Information on disposal of product
Always dispose of your product (with the non-removable pre-
installed battery) in an environmentally responsible way and
in accordance with your local waste disposal requirements.
All cardboard and paper packaging materials should
be recycled in accordance with your local council waste
regulations.
Thank you for choosing the Babysense Dreamer Sound &
Light Machine.
6. FCC Statements
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply
(1)
(2)

14
ENG
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.

15
ENG
NOTE 2: Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
7. Specifications
Model No MBZ221
Frequency 2.4GHz WiFi
Input Voltage DC5V/1A
Power Adapter Input AC 100-240V <50/60Hz; Output: 5V/1A
Operational Environment Indoor use only; Temperature: 32-104°F / 0-40°C
Humidity: 5% to 90% rh. (relative humidity)
Working Voltage 3.7V
Dynamic Current light off<200MA / light on<600MA
Static Current 20uA
Size 110*110*108mm
Speaker Diameter 40mm 4Ω 3W
Sound Level 40dB~110dB
Battery 2600MA rechargeable battery
Battery Operating Time Up to 8 hours

16
ENG
8. Warranty Terms
We take quality very seriously. This is why all of our products
come with a one-year warranty from the original purchase
date against defects in workmanship and materials. Please
register your warranty online. If you have warranty or support
issues, please contact our customer service.
[email protected]
9. Customer Support
If you have any further questions about using the product,
please contact us via:
Email - [email protected]
US Toll-Free number [phone] (USA ONLY)
Website - www.babysensemonitors.com
Please retain your purchase receipt and attach to the back page of this
user manual as you will need to produce this if warranty service is required.

Pour toute question relative à ce produit veuillez nous
contacter à [email protected]
www.babysensemonitors.com | www.hisense.co.il
Dreamer
Appareil Son & Lumière

18
FRE
1. Présentation
1.1 Contenu de l’emballage
REMARQE: L' Dreamer est fournie avec une batterie Li-ion
rechargeable intégrée.
1.2 Présentation de l'appareil
Guide De
L’utilisateur
Appareil Câble USB AC Adaptateur
DC Jack Indicater de
Charge
Power
Réinitialisation
Serial
Number
Affichera

19
FRE
REMARQE:
• Contrôle de la luminosité – Appuyez sur le bouton de
luminosité vers le haut ou vers le bas pour augmenter ou
diminuer la luminosité. Lorsque la lumière principale est
éteinte, en appuyant sur ces boutons vous augmenterez ou
diminuerez le degré de luminosité de l'affichage de l'horloge
et/ou de la température.
• Contrôle de la couleur –Appuyez sur le bouton Cpour
parcourir les couleurs : vous pouvez sélectionner une couleur
unie ou les options d'arc-en-ciel où les couleurs permutent
automatiquement toutes les 5 secondes. Appuyez
longuement pour éteindre la lumière.
Lecture / Pause Volume haut
Son précédent Volume bas
Son suivant Luminosité haut
Changement
de couleur Luminosité bas
Appuyez longuement pour activer le
mode veille & appuyez brièvement
pour réactiver et basculer entre vos
ambiances préférées
Boutons
Tactiles

20
FRE
2. Prise en Main
Etape 1:
• Raccordez le câble d'alimentation au Dreamer puis
branchez-le à votre prise électrique.
•Appuyez sur le bouton Marche pour allumer le Dreamer
(Illustration 1.2)
Etape 2:
•Vérifiez que le Bluetooth et que le WIFI de votre appareil
cellulaire est sur ON.
• Télécharger l'application : Utilisez le QR code ci-dessous ou
cherchez l'application Babysense dans la boutique Apple
App ou la boutique Google Play et téléchargez sur votre
appareil cellulaire.
•Suivez les instructions d'installation de l'application
REMARQE: Le Dreamer Babysense est compatible uniquement
avec les réseaux 2.4GHz.